Inputs/Outputs
The S600+ is supplied with one I/O (P144) module with one Pulse Mezzanine (P148) module. This provides multiple digital, analog, and pulse inputs and outputs. You can add two additional expansion modules to the S600+. The following expansion modules are available: ▪ I/O (P144) module – Provides additional analog and digital I/O. ▪ Prover (P154) module – Provides I/O for applications with a prover. ▪ HART (P188) module – Provides I/O for applications with HART transmitters. ▪ Pulse Mezzanine (P148) module – Provides pulse input capability. Note: The Pulse Mezzanine module is installed as a daughterboard on an P144 or P154 module, and does not use an additional module slot.
Configuration
Configuration of the S600+ is done through the same Windows-based intelligent set-up tool as the S600 (Config600 Lite, Config600 Lite+, or Config600 Pro). You can create or edit configuration files using Config600 Lite+ and Config600 Pro (refer to Specification Sheet Config600). The S600+ provides the following functions through the Config600 configuration tool: ▪ Stream and station totalization. ▪ Batch totalization and retro-calculation. ▪ 3-term PID control with optional secondary control. ▪ Flow balancing. ▪ Flow scheduling.