N-Tron® NT24k 16-Port, Single Redundant VDC Power Input

The N-Tron® NT24k 16-Port, Single Redundant VDC Power Input, PTP Enabled, DIN Rail Gigabit Managed Industrial Ethernet Switch is one of the easiest to deploy Ethernet switches in the industry. Simplified use, uncompromised performance and multiple configurations to fit your automation and industrial needs. Features 2 expansion slots, a modular DIN rail design and one redundant 18-49 VDC power input.

GE Multilin C30 Controller System

The C30 controller system is a programmable logic controller for performing substation or bay automation that can also be used for expanding the I/O capability of protection devices and replacing Sequence of Event (SOE) recorders. The C30 provides fast deterministic execution of programmable logic with I/O capabilities far above an average protection relay.

GE Multilin C650 Bay Control & Monitoring System

Multilin C650

Bay Control & Monitoring System

Substation hardened, the Multilin™ C650 has been designed to provide control, monitoring, and automation for a wide range of applications including bay control and monitoring in electrical substations. With high-density I/O capable of supporting up to 192 programmable digital inputs

GE Reason MU320E

MU320E is the Process Interface Unit (PIU) with analog and binary interfaces for full switchyard modeling, control and digitalization over IEC 61850 standards & protocols such as Sampled Value (SV) and GOOSE.

GE Reason MU360

MU360 is the Process Interface Unit (PIU) with analog and binary interfaces for full switchyard modeling, control and digitalization over IEC 61850 and IEC 61869 standards & protocols such as Sampled Value (SV) and GOOSE.

GE MiCOM C264 Bay Controller

GE’s MiCOM C264 bay controller provides flexibility, reliability and ease of use. A combination of dual redundant fiber optic Ethernet, modular I/O, and an expandable design and extensive library of functions make the C264 the ideal solution for a wide array of applications in substation digital control systems.

GE Multilin C60/C95 C60 Breaker Monitoring and Control

Multilin C60/C95
C60 Breaker Monitoring and Control / C95 Bay Control Unit for Substation and Industrial Automation

GE Multilin D.20 I/O Modules

GE’s classic D.20 I/O Modules are input/output modules for substation automation and SCADA RTU applications. They have stood the test of time, continue to be widely used, and are extremely reliable. Connecting to G100. G500. D400 (with D.20 RIO), and D20MX, the D.20 I/O Modules provide local, remote, and distributed physical I/O capabilities for digital and DC analog data collection and substation control.

GE Multilin D20E Advanced Substation I/O Modules

The Multilin D20E is the next-generation input/output (I/O) module for substation automation and SCADA RTU applications, ideal for D20 I/O upgrade. As a non-edge device leveraging the latest technology in microprocessors, communications and applications, the D20E I/O can be deployed within an electronic security perimeter such as with a server (e.g. D20MX or D400) or with IEDs.

GE Multilin™ G500 Advanced Substation Gateway

GE’s G500 is part of the advanced Multi-function Controller Platform (MCP). This platform offers a high-capacity, secure, substation-hardened set of modular and expandable hardware and software components designed to simplify deployment, operation, and maintenance of automation systems.

GE Multilin™ G100 Advanced Substation Gateway

GE’s G100 is part of the advanced Multi-function Controller Platform (MCP). This platform offers a high-capacity, secure, substation-hardened set of modular and expandable hardware and software components designed to simplify deployment, operation, and maintenance of automation systems.

GE iSTAT i4Mx Standard multifunction transducer

he iSTAT i4Mx is a family of multifunctional and configurable RMS AC transducers designed to meet the requirements of the medium voltage utility and low voltage industrial markets throughout the world.

iSTAT M365 Power Quality Metering with Extensive Logging and Communications

Power Quality Metering with Extensive Logging and Communications
The iSTAT M365 comprehensive power quality metering and communication features are ideal for utility, industrial and commercial power quality applications. The iSTAT M365 is an enhancement to the previous iSTAT M355 offering with extensive power quality perspective with the latest IEC61000-4-30 Class A Edition 3 certification as well

GE iSTAT M2x3 High Performance Measurement Centre

iSTAT M2x3

High Performance Measurement Centre

The iSTAT M2x3 family includes:

M233 Measurement Centre

M243 Network Recorder - Manufacturing for the M243has been discontinued. As an alternative,please refer to the M233 or M253.

M253 Power Quality Analyser

GE iSTAT M2x2 Standard Measurement Centre family

M212 Multifunction Meter - Manufacturing for the M212 has been discontinued. As an alternative, please refer to the M232.

M232 Communicating Measurement Centre

The M2x2 is a Measurement Centre providing quick, reliable measurement and monitoring of electrical quantities in a single or 3-phase distribution system.

iSTAT i400 Mean Sensing Transducers and i4XS Communications Interface

The iSTAT i400 range of Mean Sensing AC transducers, DC transducers and communications interface provide easy installation and commissioning as well as simple and economical monitoring and communications. The iSTAT i400 Mean Sensing and DC transducers are simple and compact offerings available to measure AC or DC circuits respectively for utility and industrial applications.

GE iSTAT i500 High Performance Multifunction Transducer

iSTAT i500

High Performance Multifunction Transducer

The iSTAT i500 Single Phase Transducer family includes:

i5MC Current Transducer

i5MV Voltage Transducer

GE MVTP Buswire Supervision Relay

Used to ensure the integrity of busbars and restricted earth fault schemes, the MVTP monitoring device has a low AC burden and requires no external resistors.

Single and 3-phase for continuous buswire supervision

GE MFAC High Impedance Bus Differential Relay

MFAC relays provide high-speed differential protection for various types of power system plants including generators, reactors, busbars, motors and the individual windings of power transformers. MFAC relays are fast and reliable due to simple electromechanical construction and operate as a high impedance unit protection scheme with a wide range of setting

GE MCAG High Impedance Bus Differential Relay

MCAG relays provide high-speed differential protection for various types of power system plants Including generators, reactors, busbars, motors and the individual windings of power transformers. The relays provide current-calibrated busbar differential and have an attracted armature design with simple and robust construction.

GE P40 Agile P14N, P14D, P94V P40 Agile Feeder Management

The P14N non-directional feeder, P14D directional feeder and P94V voltage and frequency IEDs bring the design rigor and technology of transmission applications to the entire utility and industrial market. The footprints of both the device physical size and the lifecycle environmental impact have been minimized using state-of-the-art design, component, and process selection. Agile solutions from GE are ideal for new-build and retrofit alike.

GE MiCOM Agile P140 Series

Part of the MiCOM P40 platform, the Agile P14x feeder management relays provide an integrated solution for the complete protection, control and monitoring of overhead lines and underground cables, covering all distribution and transmission voltage levels. Providing all essential information to efficiently maintain complex power systems and their components, the P14x relay family is user-friendly and highly flexible, allowing application on any electrical network.

GE MiCOM Agile P746 Centralized Busbar Differential Relay

The MiCOM Agile P746 provides complete protection for MV and HV busbar configurations with up to 2 zones plus a check zone, and up to 18 terminals. The MiCOM Agile P746 provides a centralized one box or three box architecture and is very simple to use. as it does not need to be deeply engineered and supports easy operation and maintenance of busbars.

GE MiCOM Agile P747 Centralized Busbar Differential Relay

The Multilin B90 bus protection relay, a member of the UR Family, features integrated protection and breaker failure for re-configurable MV, HV, EHV multi-section busbars with up to 24 feeders. Use one or more B90 relays together to build a flexible protection system that can be engineered to meet specific application requirements. The B90 performs fast and secure low-impedance bus protection with a sub-cycle tripping time of 0.75 cycles and 06 differential zones per phase.

GE Multilin B90 Low Impedance Bus Protection System

The Multilin B90 bus protection relay, a member of the UR Family, features integrated protection and breaker failure for re-configurable MV, HV, EHV multi-section busbars with up to 24 feeders. Use one or more B90 relays together to build a flexible protection system that can be engineered to meet specific application requirements. The B90 performs fast and secure low-impedance bus protection with a sub-cycle tripping time of 0.75 cycles and 06 differential zones per phase.

GE MiCOM Agile P74x Series

MiCOM Agile P74x Series
Distributed Busbar Differential Relays – P741 Central Unit , P742 Peripheral Unit , P743 Extended Peripheral Unit

GE Multilin B30 Multiple Sections Low Impedance Busbar Protection

The Multilin B30 bus protection relay features integrated protection, visualization and metering for LV, MV, HV and EHV busbars, providing cost-effective, feature-focused centralized or distributed busbar protection scheme. Use the B30 to protect busbars with up to 6 feeders 2-zones (conventional CT inputs) or up to 16 feeders 6-zones (with process bus module) with up to six three-phase differential zones. The Multilin B30 relay is a cost-effective alternative to high-impedance schemes, ideal for breaker-and-half bus schemes, with integrated feeder backup protection.

GE Dolin G60 generator protection system

HoneywellEXPERION PKSSeries C I/O User's Guide EPDOC-X126-en-A November 2019

Honeywell C200 TK-PRS021

HITECHPWS-1711 Series PLC Workstation

GEMotor Protection System Integrated process, control, and protection for low voltage motors

GESPEEDTRONIC™ Mark VI Turbine Control System

GESPEEDTRONIC™ MARK V STEAM TURBINE CONTROL SYSTEM

GESPEEDTRONIC™ MARK V GAS TURBINE CONTROL SYSTEM

GEMARK* VIE CONTROL PRODUCT DESCRIPTION