GE MiCOM P40U Connect MiCOM P40 IEDs to PCs with USB ports

GE MiCOM P40U Connect MiCOM P40 IEDs to PCs with USB ports

The P40U adaptor is the solution for users who want to communicate with GE Vernova MiCOM P40 IEDs via PCs that have USB communication ports.

The P40U Px40 USB Adaptor is used to connect local serial/parallel port relays to a laptop/PC, so that settings may be transferred to/from the relay and PC, allowing firmware updates and menu text editing. The P40U Adaptor fits any MiCOM P40 relays in GE Vernova’s installed base including Areva, GE VERNOVA and GE Vernova brands.

Using this adaptor is quick and easy. Simply install the S1 Agile version 1.4.2 or higher on your PC, plug in the adaptor and you are ready to communicate.

Features and Benefits

Designed for high speed transmissions for optimal performance

Special adaptor software not required - all is hosted natively within the S1 Agile toolsuite

Serial and parallel port connection in-one

Allows common interface cable to be used for the installed base with legacy ports and future MiCOM P40 with native USB

Specifications

RS-232C standard compliant

DB 9 male and DB25 male connectors

Powered by PC workstation USB Port

Hardware Requirements

Windows based PC with USB Port

USB-Serial Driver Operating Systems supported:

Windows 7 (32-bit & 64-bit)

Windows 8.1 (64-bit)

Windows 10 (32-bit/64-bit)

Supported Devices

P14x Feeder Management Relay

P145 High Impedance Busbar Relay

P24x Motor Management Relay

P34x Generator Management Relay

P44x & P44y Line Distance Relay

P54x Line Current Differential Relay

P54M Multi-ended Line Current Differential Relay

P547 Phase Comparison Relay

P64x Transformer Management Relay

P746 & P747 Centralized Bus Differential Relay

P740 Decentralized Bus Differential System Relay

P84x Feeder Management Relay

P847 Phaser Measurement Relay