Beckhoff C6525-0060 | Fanless built-in Industrial PC



C6525-0060 | Fanless built-in Industrial PC

The C65xx Industrial PC series is designed to be installed in the panels of the control cabinet or in the rear panel of a control housing or console housing.

The heat sink of the Industrial PC is fed to the outside through a suitable cut-out in the control cabinet or housing panel. Power dissipation from the processor and chipset takes place directly to ambient.

Integrated seals provide for an IP65 closure. This enables high thermal stability and at the same time fanless operation. Industrial PCs of type C65xx can hence be constructed completely without rotating parts.

Industrial design

If the C65xx built-in PC is combined with a Beckhoff Control Panel, the result is a fanless Panel PC that enables operation up to an ambient temperature of 45°C.

The compact housing is equipped with a 3½-inch motherboard for Intel® Celeron® or Core™ i3/i5/i7 of the latest generation. All of the PC’s connectors are located on the top side of the housing.

Maximum data availability and data security

The PCs of the C65xx series are supplied with an integrated power supply unit with 24 V DC input voltage, optionally with integrated uninterruptible power supply (UPS).

A battery pack can be connected externally and installed on a DIN rail close to the PC.

Scalable performance

Industrial PCs from this series, combined with the Beckhoff Control Panels as an operating unit, produce a powerful control platform for machine construction and plant engineering – in particular with the TwinCAT automation software running on Windows 10 IoT Enterprise.

Central EtherCAT controller

Due to the two independent Ethernet interfaces, the C6515 and C6525 Industrial PCs are ideally suited for use as the compact central unit of an EtherCAT controller.

Two hard disks, two SSDs or two CFast cards can be mirrored with the on-board SATA RAID 1 controller.

If a RAID drive fails, the system continues to operate. The defective data carrier can be replaced while operation continues and the mirroring can be repeated.

Technical data    C6525-0060    Options

Device type    Fanless built-in Industrial PC with external cooling to be mounted in the back panel of a control housing or in the wall of a control cabinet

Slots for hard disk/flash    1 slot for 2½-inch hard disk/SSD, 1 slot for CFast    2 slots for CFast or 2 slots for 2½-inch hard disk/SSD

Cooling    passive through heat sink structure outside

Free space for air circulation    20 cm (7.9") around the heat sink required

Protection rating    outside IP65. inside IP20

Operating temperature    outside 0…45°C, inside 0…55°C

Weight of basic configuration    5.9 kg (13 lbs)

Dimensions (W x H x D)    330 x 275 x 82 mm (13" x 10.8" x 3.2")    with PCIe module slots 109 mm depth (4.2"), with PCIe/PCI plug-in card slots 146 mm (5.8") depth

Processor    Intel® Celeron® G3900TE 2.3 GHz, 2 cores (TC2. TC3: 50)    up to Intel® Core™ i7 7700(T) 2.9 GHz, 4 cores (TC3: 80)

Motherboard    3½-inch motherboard for 6th/7th generation Intel® Celeron®, Pentium®, Core™ i3/i5/i7

PCIe® slots    –    2 PCIe® module slots or 2 plug-in card slots PCI™ or PCIe®

Memory    4 GB DDR4 RAM    up to 32 GB DDR4 RAM ex factory

Graphic    integrated in the processor

Ethernet    2 x 100/1000BASE-T on-board

RAID    on-board SATA RAID 1 controller

Hard disks/flash    hard disk, 2½-inch, 1 TB    SSD, CFast

Interfaces    4 x USB 3.0. 1 x RS232. 1 x DVI

Power supply    24 V DC    UPS

Operating system    –    Windows 10 IoT Enterprise