ADLINK cPCI-6910 Series 6U CompactPCI® Dual-Core Intel® Xeon® Processor LV / ULV Universal Blade

CPCI-6670 6U CompactPCI Low Power Pentium® III SBC

Specifications

CPU Intel BGA2 mobile Pentium-III up to 850MHz with 256K on-die L2 cache

FSB 100MHz

Chipset Intel 440BX

RAM Two 144-pin SO-DIMM sockets, up to 512MB SDRAM

Standards PICMG 2.0 R3.0

CompactPCI Bus 32-bit/33MHz, support 7 bus-mastering devices, TI PCI2050

PCI to PCI bridge

Chip Award 2Mb flash memory

Features Intel PXE pre-boot on Ethernet

Display ATI Mobility Radeon M6 with 8MB VRAM

Ethernet Single 10/100Mbps Ethernet Port by Intel 82559

IDE UDMA-33. dual channels, built-in 2.5" ATA HDD housing

Floppy Standard 34-pin connector and one slim type FDD connector

USB USB 1.1. single port

Front Panel I/Os COM1 (RS-232. DB-9), COM2 (RS-232/422/485. RJ-45),

PS2 KB+MS (combo), USB, LAN, VGA, PMC

Connectors FDD (34-pin & slim type), IDE1 & IDE2 (44-pin), LPT (26-pin)

Form Factor 6U CompactPCI

Dimensions 233mm x 160mm (L x W), 1 slot (4HP) wide

Operating Temp. 0 to 55˚C (inside-chassis temp, CPU type dependant;

external air-flow required)

Storage Temp. -20 to 80˚C

Shock 15G peak-to-peak, 11ms duration, non-operation

Vibration Non-operation: 1.88Grms, 5-500Hz, each axis

Operation: 0.5Grms, 5-500Hz, each axis, with 2.5" HDD

Measured Power Low Power Pentium III-700 & 128MB RAM:

Consumption 3.2A @ +5V, 5.76A @ +3.3V, 228mA @ +12V (w/o HDD)

Mobile Pentium III-850 & 512MB RAM:

5.8A @ +5V, 5.92A @ +3.3V, 228mA @ +12V (w/o HDD)

Compliance CE, FCC Class A

Features

Design for low power BGA2 Pentium III CPU running at FSB 100MHz

Two 144-pin SODIMM sockets support up to 512MB SDRAM

Built-in housing for 2.5" low profile HDD

On-board high performance AGP VGA output via ATI Mobility Radeon M6 controller

All-in-one front access I/O ports, including LAN, COM and USB

One PMC site for expanding functions