Eaton WL-35717F Vacuum Interrupter



Eaton WL-35717F Vacuum Interrupter

Eaton WL-35717F Vacuum Interrupter

Requirements for proper operation

The following points must be observed so that the device meets the contractual requirements:

 Only qualified personnel may work with the device.

 These persons must have read the Operating Instructions and must observe the requirements

described.

 The ambient conditions stated must be observed. See Chapter 9.9 Ambient conditions,  77.

 The maintenance work must be carried out correctly.

 Potentially explosive atmosphere, Zone 22:

The ground resistance of accessible metal parts must be less than 109 ohms.

No liability is accepted for damage, consequential damage and accidents caused by the following:

 Failure to observe work safety regulations

 Failure or malfunction of the device

 Improper handling or use

 Failure to observe the Operating Instructions

 Conversions, modifications and repairs to the device

The device has the following operating and indication elements on the front:

Element

A Touch sensor

Function

Detection of the actuation of the operating elements shown on the

display.

 Resistive touch:

These devices are operated by touching the operating elements with

your finger or with a stylus.

 Infra-red touch:

These devices are operated by interrupting the infra-red light matrix

with your finger or a suitable object (min. ø 7 mm). It is not necessary

to touch the infra-red touch protective panel.

B Display

Display operating and indication elements.

The device has the following operating elements on the service side:

Tab. 6 Operating elements on the service side

Abb. 7 Operating elements on the service side (CF slot cover fitted)

Abb. 8 Operating elements on the service side (CF slot cover removed)

Element Function

A CF slot cover Fastening the CF card in the CF slot.

B CF slot 0 Slot for CF card with operating system and normally with PLC and visu

alization projects.

C Ejector button Ejecting the CF card.

D Control button Function depends on the software used