Beckhoff CX5620-0163    CPU module



CX5620-0163    CPU module, Microsoft Windows 10 IoT Enterprise 2019 LTSC, 32 bit, TwinCAT 2 NC I runtime

CX5620 | Embedded PC with AMD Ryzen™ R1102G

The CX5620 is an Embedded PC based on the AMD Ryzen™ R1102G processor with a clock speed of 1.2 GHz (dual-core) and 4 GB DDR4-RAM.

The basic equipment includes two independent, 1.0 Gbit-capable Ethernet interfaces as well as four USB 3.0 and one DVI-D interface.

A replaceable, industry-standard M.2 SSD (SATA) is used as the boot and storage medium, enabling even faster read and write access and large-volume data handling.

The M.2 SSD is easily accessible behind a flap to enable rapid hardware replacement in case of service, even on site.

A wide range of additional connection options or gateway functions are available thanks to the optional interface and I/O level, which can consist of either E-bus or K-bus terminals and can be fitted ex factory.

C9900-B654    Specific BIOS with activated UPS OCT instead of standard BIOS.

This BIOS is only usable with a CU81xx UPS module.

CX2900-0110    Device modification for CX5330. CX5340. CX5620 and CX5630 Embedded PCs according to the requirements for ATEX, IECEx and FM certification.

The modification is mandatory for the usage of the devices in hazardous areas, Zone 2/22 or Class I, Division 2.

It includes the modification and repositioning of the device label as well as an assembly kit for a mounting bracket for mechanical locking of the connectors.

Read the device documentation for use in hazardous areas carefully.

Optional interfaces

CX5620-N010    DVI-D interface, additional DVI-D port for clone or extended display mode.

Is not supported by TwinCAT/BSD.

CX5620-N011    DisplayPort interface, additional DisplayPort for clone or extended display mode.

Is not supported by TwinCAT/BSD.

CX5620-N020    audio interface, 3 x 3.5 mm jack sockets, Line In, Mic In, Line Out or 5.1 Surround

CX5620-N030    RS232 interface, D-sub plug, 9-pin (RXD, TXD, RTS, CTS)

CX5620-N031    RS485 interface, D-sub socket, 9-pin, configuration as an end point, without echo, termination on

CX5620-N031-0001    RS485 interface, D-sub socket, 9-pin, configuration as an end point, with echo, termination on

CX5620-N031-0002    RS485 interface, D-sub socket, 9-pin, configuration as drop point, without echo, termination off

CX5620-N031-0003    RS485 interface, D-sub socket, 9-pin, configuration as drop point, with echo, termination off

CX5620-N031-0004    RS422 interface, D-sub socket, 9-pin, configuration as full duplex end point, termination on

CX5620-M112    2 x EtherCAT master interface

CX5620-B110    EtherCAT slave interface, EtherCAT IN and OUT (2 x RJ45)

CX5620-M310    PROFIBUS master interface, D-sub socket, 9-pin

CX5620-B310    PROFIBUS slave interface, D-sub socket, 9-pin

CX5620-M510    CANopen master interface, D-sub plug, 9-pin

CX5620-B510    CANopen slave interface, D-sub plug, 9-pin

CX5620-M930    PROFINET RT, controller interface, Ethernet (2 x RJ45 switch)

CX5620-B930    PROFINET RT, device interface, Ethernet (2 x RJ45 switched)

In addition, a system module or fieldbus module from the CX2000 series can be plugged in via the high-pole connection on the left-hand side of the device.

Although the total number of plug-in modules of the type CX2500-xxxx is limited to one with the CX5600 series, it is possible in this way, for example, to implement two further Gbit Ethernet interfaces or four further USB interfaces or a further fieldbus interface.

Furthermore, the CX5620 is characterized by an internally electrically isolated power supply unit, built-in 1-second UPS, low power consumption and fanless cooling.

The TwinCAT automation software turns the CX5620 system into a high-performance PLC and motion control system that can be used with or without visualization.

Both TwinCAT 2 in 32-bit mode and the latest TwinCAT 3 version in 64-bit mode are supported. Continuing support for TwinCAT 2 guarantees investment protection for projects and systems that were or will be created with this 32-bit generation.

The extended operating temperature range from -25°C to +60°C allows use in climatically demanding applications

Technical data    CX5620

Processor    AMD Ryzen™ R1102G, 1.2 GHz

Number of cores    2

Flash memory    slot for M.2 SSD (SATA) and microSD card (storage media not included)

Main memory    4 GB DDR4 RAM

1-second UPS    integrated (1 MB on M.2 SSD)

Interfaces    2 x RJ45 10/100/1000 Mbit/s, 1 x DVI-D, 4 x USB 3.0. 1 x optional interface

Cooling    passive

Diagnostics LED    1 x power, 1 x TC status, 1 x flash access, 2 x bus status, 2 x user LED

Clock    internal battery-backed clock for time and date (battery exchangeable)

Operating system    Windows 10 IoT Enterprise 2019 LTSC, Windows 10 IoT Enterprise 2021 LTSC, Windows 11 IoT Enterprise 2024 LTSC, TwinCAT/BSD, Beckhoff RT Linux®

Control software    TwinCAT 2 runtime

TwinCAT 3 runtime (XAR)

I/O connection    E-bus or K-bus, automatic recognition

Power supply    24 V DC (-15%/+20%), electrically isolated

UPS OCT-capable    yes

Max. power consumption    17 W

Max. power consumption (with loading UPS)    38 W

Max. power consumption E-bus/K-bus    10 W (5 V/max. 2 A)

Weight    approx. 860 g

Dimensions (W x H x D)    124 mm x 100 mm x 92 mm

Relative humidity    95%, no condensation

Operating temperature    -25…+60°C

Storage temperature    -40…+85°C

Vibration/shock resistance    conforms to EN 60068-2-6/EN 60068-2-27

EMC immunity/emission    conforms to EN 61000-6-2/EN 61000-6-4