Unicom-JETNETJetNet 4510 Industrial 10-port Management Fast Ethernet Switch

7 10/100 Base TX and 3 RJ-45/SFP combo (10/100BaseTX, 100Base-FX )

Flexible Fiber connection-Multi or Single mode fiber 

cable

Comprehensive Ring Technology- Multiple Super Ring 

(MSRTM)

Latest Rapid Super Ring Technology- 5 ms failover time, 

zero for restore time

Multi-path, Multi-node backup technology-Rapid Dual 

Homing (RDHTM )

Multiple ring coupling technology- MultiRingTM

Ring Path Aggregation technology - TrunkRingTM

Flexible Ring architecture- TangentRingTM,CrossRingTM

, AnyRingTM

Support device recovery utility - JetViewTM

High Speed Fabric-32Gbps with Non-blocking technology 

LACP /VLAN / GVRP /QoS /IGMP Snooping/Rate 

Control/ Online Multi-Port Mirroring

Secured by Port, Access IP, SSH and HTTPS Login

IEEE 802.1x with Local and remote authenticate service.

(YHQW1RWL¿FDWLRQE60736103WUDSDQGVVWHPORJV

Cisco-Like CLI, Web, SNMP/RMON for network 

Management

Redundant DC Power Inputs, Digital Input and Relay 

Output

1.5KV Hi-Pot Protection for ports and power

,QGXVWULDO+HDW GLVSHUVLQJ GHVLJQ aÛ& RSHUDWLQJ

temperature, Rigid Aluminum Case Complies with IP31

The JetNet 4510 is a Managed industrial Ethernet 

Switch, equipped with 7 ports 10/100TX and 3 

ports 10/100 RJ-45 / 100FX SFP combo ports. 

The JetNet 4510 is designed as rugged surface in 

aluminum alloy material and with wide operating 

temperature. The software supports full L2

management features, ring redundancy, network 

Overview

control, security and alert features. The JetNet 

4510 also supports RS-232 console for out of band 

management and the combo port design could 

enlarged connection from 10 ports pure 10/100Mbps

pure copper to 7 ports 10/100Mbps copper plus 3 

¿EHUSRUWVZLWKPXOWLPRGHRUVLQJOHPRGHWUDQVFHLYHU

in random.

It is critical for industrial applications that network 

remains non-stop. Korenix Rapid Super Ring 

technology provides network redundancy that can 

self-recover in less than 5 ms at full load. Besides, 

JetNet 4510 provides users with many advanced 

management features. It can be configured smartly 

by console CLI and web browser, the network 

DGPLQLVWUDWRUFDQGH¿QHHYHQWQRWL¿FDWLRQWREHVHQW

via E-mail, SNMP trap, Syslog or relay output. Online 

status of each port is also shown on web page. To 

optimize network traffic, network administrators 

can segment ports into different VLANs, or filter 

S

multicast traffic by IGMP Snooping. Bandwidth 

can be managed by port rate control to avoid 

abnormalbroadcast storm. To enhance security, 

port access can be limited to pre-defined IP 

address table, binding MAC address to specific 

port or managed by HTTPS or SSH or perform 

access security through IEEE 802.1x mechanism. 

Network determinism is answered by QoS, Quality 

of Service, for traffic prioritization. JetNet 4510

is the perfect combination for intelligent network 

management and robust network operation.

The JetNet 4510 equips three combo Fast Ethernet 

ports, each combo port combining one Small Form 

factor Pluggable (SFP) socket for 100Mbps multimode or single mode SFP transceiver and one RJ-45 

copper port in 10Mbps full duplex, 100Mbps half /full 

duplex link mode. The switch will automatically detect 

3 Flexible Fast Ethernet Combo Ports

the cable connections priority for combo port. Users 

can connect two 100Mbps SFP ports of JetNet 4510

as a Fast Ethernet Fiber Redundant Ring topology 

and the third combo port as a fiber uplink port or 

applicable port.

Comprehensive Redundant Solutions- Multiple Super 

Ring (MSRTM) Technology

It is critical for industrial applications that network 

remains non-stop. The JetNet 4510 supports new 

generation of ring technology – MSRTM which 

includes various new technology for different network 

redundancy applications and architectures. With the 

MSRTM technology, the failover time could be short 

less than 5 milliseconds and with zero second restore 

time. Unlimited device connective, user can enlarged 

the ring architecture as the campus need without 

delay of the data traffic. The MSRTM also facilitates 

the JetNet 4510 to connect with core management 

switch via standard Rapid Spanning Tree protocol 

though multiple paths or multiple nodes

to increase the reliability by Rapid Dual Homing 

(RDHTM) technology. To higher link availability and 

increase link capacity, the JetNet 4510 has been 

implemented IEEE 802.3ad Link Aggregation Control 

Protocol (LACP). With LACP technology, the JetNet 

4510 can negotiate an automatic port bundling 

dynamically between switches. Two or more Fast 

Ethernet connections are combined in order to 

increase the bandwidth and to create resilient and 

redundant links, it also allows two power inputs 

for power redundancy and wide DC power range, 

from DC 12V to DC 48V plus supporting DC-48V in 

industrial applications.

Rapid Super Ring (RSR) Technology

Rapid Super Ring is Korenix 2nd generation Ring 

redundancy technology. The recovery time is