The ABB DSAI 130A 3BSE018292R1 is a high-performance analog input module, suitable for a variety of industrial automation and control systems. The following are its main applicable fields and features: Applicable fields: Industrial control: It is used to measure and control parameters such as temperature, pressure, and flow rate. Process control: Control valves, motors and other equipment. Medical system: Monitor patients' vital signs. Laboratory: Measure and control experimental parameters. In the automation control of industries such as chemical engineering, pharmaceuticals, and food processing, analog signals are converted into digital signals for processing and analysis to enhance production efficiency and quality. Main features: High precision: It adopts a 16-bit analog-to-digital converter (ADC) to provide high-precision analog signal measurement and control. Multi-channel: It features 16 analog input channels and can handle multiple signals simultaneously. Wide input range: Supports voltage and current input, with a voltage range of -10V to +10V and a current range of -20mA to +20mA. High-speed response: The response time is short, only 1ms, meeting the requirements of real-time monitoring and control. Reliability: Made of high-quality components, it can operate stably in harsh industrial environments. Modular design: Easy to install and maintain, and convenient for integration and expansion with existing systems. Compatibility: Compatible with a variety of control systems, including ABB's Advant OCS and 800xA systems, etc. Communication interface: It includes Ethernet and supports multiple communication protocols, facilitating data exchange. In conclusion, the ABB DSAI 130A 3BSE018292R1, with its high precision, multi-channel and reliability features, is suitable for industrial application scenarios that require real-time monitoring and control.
The ABB DSAI 130A 3BSE018292R1 is a high-performance analog input module with multiple advantages, suitable for industrial automation and control systems. The following are its main benefits: Performance advantage - High-precision signal processing: With 16-bit resolution and ±0.32% accuracy, it ensures the accuracy of signal conversion. Multi-channel input: It offers 16 analog input channels, allowing for the connection of multiple sensors to meet the requirements of complex systems. Fast response: With a sampling rate as high as 1000Hz, it enables real-time data collection and processing. Compatibility and flexibility: Wide compatibility: Compatible with multiple control systems and easy to integrate into existing systems. Multiple signal support: It can receive voltage and current signals and adapt to different types of sensors. Reliability and durability: Wide temperature range operation: Stable operation within the temperature range of -40℃ to +85℃, suitable for harsh environments. High protection grade: With an IP65 protection grade, it is dust-proof and water-proof, suitable for various industrial environments. Easy to install and maintain. Compact design: Small in size, light in weight, easy to install and space-saving. Simple configuration: Easy to install and configure, reducing debugging time. Communication capabilities: Multiple communication interfaces: including Ethernet, supporting multiple protocols, facilitating data exchange and system integration. In summary, the ABB DSAI 130A 3BSE018292R1 module features high precision, multi-channel functionality, fast response, wide compatibility, high reliability, easy installation and maintenance, as well as strong communication capabilities, capable of meeting the demands of various industrial applications
ABB DSAI 130A 3BSE018292R1 is an analog input module. The following are its main parameters: Basic parameters Brand: ABB Model: DSAI 130A Product Number: 3BSE018292R1 Performance Parameters Number of channels: 16 channels Accuracy: 0.025% Input Signal type Supports multiple signal types, including voltage signals (such as ±10V) and current signals (such as ±20mA), etc. Conversion resolution: 16 bits. Response time: 1ms. Physical parameter dimensions: length 324mm, width 225mm, height 22.5mm. Some data also show that its net dimensions are 327.6mm in length, 236.7mm in width and 14.4mm in height. Weight: Approximately 0.32kg; Other data indicates that it is 0.52 kilograms. Electrical parameters: Power supply voltage: 24VDC Power Consumption: 5W Environmental parameters: Operating Temperature range: -40℃ to +85℃ Storage Temperature range: -40℃ to +85℃ Other Parameters: Compatibility: Compatible with multiple control systems, suitable for industrial application scenarios such as factory systems, monitoring and data acquisition systems, medical systems, and transportation equipment. Communication interface: It includes Ethernet and supports multiple communication protocols, facilitating data exchange with other devices or control systems. Protection grade: IP65. These parameters demonstrate the high performance, high precision and wide applicability of the DSAI 130A 3BSE018292R1 module, making it an indispensable part of industrial automation control systems.
The main function is analog signal reception and conversion: It receives analog signals (such as temperature, pressure, liquid level, etc.) from on-site sensors or equipment, processes these signals and then sends them to the control system for analysis and decision-making. Servo control: Equipped with servo control function, it can convert and transmit control signals. Technical specification: Number of channels: 16 channels. Input type: Analog input (voltage/current). Voltage range: -10V - 10V to +10V+10V. Current range: -20mA - 20mA to +20mA - +20mA. Resolution: 16 bits. Accuracy: ±0.1%±0.1%. Sampling rate: 1000Hz. Physical dimensions: length 324mm, width 225mm, height 22.5mm, weight approximately 0.32kg. Operating temperature range: -20 ℃ to +60℃. Storage temperature range: -40 ℃ to +85℃. Relative humidity: 5% to 95% (non-condensing). Protection grade: IP65. Compatibility and interface compatibility: Compatible with multiple control systems, suitable for industrial application scenarios such as factory systems, monitoring and data acquisition systems, medical systems, and transportation equipment. Communication interface: It includes Ethernet and supports multiple communication protocols, facilitating data exchange with other devices or control systems. Port options: 4 to 32 port options are provided, achieving a 66MHz bus speed through the Control Unity ASIC chip, with a communication speed of up to 921Kbps. Power supply requirements: Power supply voltage: 24VDC - 24VDC. Power consumption: <5W<5W. The installation and configuration module is designed to be easy to install and configure. For specific operations, please refer to the user manual. Application field: Industrial control: Used for measuring and controlling parameters such as temperature, pressure, and flow rate. Process control: Used for controlling valves, motors and other equipment. Medical: Used for monitoring patients' vital signs. Laboratory: Used for measuring and controlling experimental parameters. Please note that the above information is for reference only. For specific usage instructions, please refer to the user manual provided by ABB officially
When using ABB DSAI 130A 3BSE018292R1, the following points should be noted: Installation and configuration environment requirements: Ensure that the installation environment meets the product requirements and avoid using it in places with extreme temperatures, humidity, or strong vibration and electromagnetic interference. Correct wiring: Strictly follow the wiring diagram for wiring to ensure that the connection of power and signal lines is correct and error-free, avoiding equipment damage or malfunction caused by incorrect wiring. Grounding treatment: Ensure proper grounding of the equipment to enhance the system's anti-interference capability and safety. Regular inspection for operation and maintenance: Regularly check the working status of the equipment, including indicator lights, display screens, etc., and promptly identify and handle any abnormal situations. Cleaning and maintenance: Keep the equipment clean, regularly remove dust and debris to prevent dust accumulation from affecting the heat dissipation and normal operation of the equipment. Software update: Pay attention to the software version of the device and update it in a timely manner to obtain better functions and security. Fault handling and troubleshooting: When equipment malfunctions, it is necessary to conduct an investigation based on the fault symptoms, identify the cause of the fault and handle it accordingly. Professional maintenance: For faults that cannot be handled independently, professional maintenance personnel should be contacted promptly for repair to prevent greater losses due to the expansion of the fault. Safety Precautions and anti-static measures: When touching the equipment, anti-static measures should be taken, such as wearing anti-static wristbands, to prevent static electricity from causing damage to the equipment. Adhere to operating procedures: When operating the equipment, strictly follow the operating procedures to avoid equipment damage or personal injury caused by misoperation. By adhering to the above precautions, the normal operation and long-term stability of ABB DSAI 130A 3BSE018292R1 can be ensured, and the reliability and safety of industrial automation systems can be enhanced.
Address:Xiamen City, Fujian Province, China
TELL:
E-MAIL:yang@kongjiangauto.com
E-MAIL:gedcs868@gmail.com