DeltaV™ Electronic Marshalling for Migrations

Storage Temperature -40 to 85°C (-40 to 185°F)

Relative Humidity 5 to 95% , non-condensing

Protection Rating IP 20

Airborne Contaminants ISA-S71.04-1985 Airborne Contaminants Class G3

Conformal coating

Shock 10 g ½-sine wave for 11 ms

Vibration 1 mm peak-to-peak from 5 to 13.2 Hz; 

0.7 g from 13.2 to 150 Hz

Dimensions

Height 10.5 in (26.7 cm)

Depth 6.68 in (17.4 cm)

Width 19 in (48.3 cm)

Mounting 19 in (48.3 cm) EIA rails 

6 Rack Units (U) high

Redundant Migration CIOC2 with Copper Ethernet, includes redundant pair of CHARM I/O Card 2, 

CHARM I/O Carrier with Screw Terminals, Copper I/O Ports, CHARMs Baseplate Extender with Bottom 

Cable Connector, a Baseplate Identifier and a Separation Wall

SE6505T03

Redundant Migration CIOC2 with fiberoptic Ethernet, includes redundant pair of CHARM I/O Card 2, 

CHARM I/O Carrier with Screw Terminals, Fiberoptic I/O Ports, CHARMs Baseplate Extender with Bottom 

Cable Connector, a Baseplate Identifier and a Separation Wall

SE6505T04

CHARMs Migration CIOC Panel

19” Migration panel with DIN-rail support for 2 redundant migration CIOCs

SE6503T01

CHARM Baseplates for Migrations

Description Model Number

CHARMs Migration Baseplate Assembly:

„ Two CHARM Baseplates

„ Two CHARM Address Terminal Blocks with screw terminals

„ 24 Standard CHARM Terminal Blocks

„ CHARM Baseplate Extender with Cable Connectors – Top

„ CHARM Baseplate Extender with Cable Connectors – Bottom

„ 19” migration panel with DIN-rail

„ 3 Baseplate Identifiers

SE4601T03

CHARMs Migration Baseplate Assembly with 3-wire DI Fused-Injected Field Power:

„ Two CHARM Baseplates

„ Two CHARM Address Terminal Blocks with screw terminals

„ 24 3-wire DI Fused Injected Power CHARM Terminal Blocks

„ CHARM Baseplate Extender with Cable Connectors – Top

„ CHARM Baseplate Extender with Cable Connectors – Bottom

„ 19” migration panel with DIN-rail

„ 3 Baseplate Identifiers

SE4601T10

CHARMs Migration Baseplate Assembly with Fused-Injected Field Power:

„ Two CHARM Baseplates

„ Two CHARM Address Terminal Blocks with screw terminals

„ 24 Fused Injected Power CHARM Terminal Blocks

„ CHARM Baseplate Extender with Cable Connectors – Top

„ CHARM Baseplate Extender with Cable Connectors – Bottom

„ 19” migration panel with DIN-rail

„ 3 Baseplate Identifiers

SE4601T04

CHARMs Migration Baseplate Panel:

19” Migration panel with DIN-rail support for 2 CHARM Baseplates and Cable Extenders

KL4504X1-BA1

CHARM Baseplates for Migrations

Description Model Number

CHARMs Migration Baseplate Assembly with Relay Output:

„ Two CHARM Baseplates

„ Two CHARM Address Terminal Blocks with screw terminals

„ 24 Relay Output CHARM Terminal Blocks

„ CHARM Baseplate Extender with Cable Connectors – Top

„ CHARM Baseplate Extender with Cable Connectors – Bottom

„ 19” migration panel with DIN-rail

„ 3 Baseplate Identifiers

SE4601T06

IS CHARMs Migration Baseplate Assembly:

„ Two IS CHARM Baseplates

„ Two IS CHARM Address Terminal Blocks

„ 24 IS CHARM Standard Terminal Blocks

„ CHARM Baseplate Extender with Cable Connectors – Top

„ CHARM Baseplate Extender with Cable Connectors – Bottom

„ 19” migration panel with DIN-rail

„ 3 Baseplate Separation Walls

SE4608T02

Important Note:

The IS CHARMs are dimensionally different than non-IS CHARMs. The IS CHARM Baseplates are supposed to be mounted on the same 

19” migration panel than the non-S Baseplates, therefore the IS CHARMs will stick 45 mm further out of the 19” frame than non-IS CHARMs!

CHARM I/O Baseplate Address Plugs

Description Model Number

CHARM Addressing Plugs, includes Address Plugs 1 through 8 SE4602

CHARM Addressing Plugs, includes Address Plugs 1 through 4 SE4613

Prerequisites

DeltaV Electronic Marshalling hardware requires DeltaV v11.3.1 or later software.

CHARM I/O Baseplate Extender, Terminator and Cables

Description Model Number

CHARM Baseplate Extender with Cable Connectors, Top (Male)

includes a Baseplate Identifier and a Baseplate Separation Wall

SE4603T05

CHARM Baseplate Extender with Cable Connectors, Bottom (Female)

includes a Baseplate Identifier and a Baseplate Separation Wall

SE4603T06

CHARM Baseplate Terminator, Top (Male)

includes a Baseplate Identifier and a Baseplate Separation Wall

SE4604T03

CHARM Baseplate Terminator, Bottom (Female)

includes a Baseplate Identifier and a Baseplate Separation Wall

SE4604T04

CHARM Baseplate Cables, includes two 0.5m cables SE4605T02

CHARM Baseplate Cables, includes two 1m cables SE4605T03

CHARM Baseplate Cables, includes two 2m cables SE4605T04

Each vertical DIN-rail requires a DIN-rail stop to lock baseplates in position. Order VE4054DRS, which is a box of 5.

IS CHARM FUSE

Description Model Number

Fuse Holder and Fuse Assembly for 24V DC Power Supply of CHARM I/O CARD SE4610T01*

DeltaV Electronic Marshalling for Migrations