GE Multilin D20E Advanced Substation I/O Modules

Multilin D20E

Advanced Substation I/O Modules

The Multilin D20E is the next-generation input/output (I/O) module for substation automation and SCADA RTU applications, ideal for D20 I/O upgrade. As a non-edge device leveraging the latest technology in microprocessors, communications and applications, the D20E I/O can be deployed within an electronic security perimeter such as with a server (e.g. D20MX or D400) or with IEDs.

The D20E can also be used to replace legacy D20 I/O modules with minimal field wiring changes. The D20E has the same termination connector and alignment as the existing D20 I/O; this makes the D20E a practical and cost-effective solution for substation RTU and automation upgrades and retrofits.

Key benefits:

State-of-the-art control I/O modules

D20 I/O replacement with terminal block alignment and minimal field wiring required

Coupled with DAPserver, upgrade substation’s control equipment with added features and increased performance

Four hardware configuration models available for optimal adaptation to your project

Applications

New substation D20 I/O deployment

Legacy D20 I/O expansion and replacement

I/O modules for integrated substation control systems

I/O modules for primary equipment monitoring

I/O modules for distribution equipment monitoring

I/O modules for distribution automation (on-load tap changer, capacitor bank interface, voltage regulator interface)