schneiderIGP10, IGP20 Intelligent Gauge Pressure Transmitters IAP10 Intelligent Absolute Pressure Transmitter

and not available with carbon steel process covers) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . X2

Cleaned and Prepared for Chlorine Service (Available only with Structure Codes having Flourinert

and not available with carbon steel process covers) (Includes 17-4 ss bolts; do not specify option B2. . . . . . . . . . . . X3

Bolting for Process Covers and Process Connectors

316 ss Bolts and Nuts (Maximum upper range limit pressure 150 bar or 2175 psi) . . . . . . . . . . . . . . . . . . . . . B1

17-4 ss Bolts and Nuts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B2

Gauge, Abs. and d/p Pressure IGP10 - IGP20 - IAP10

CA 2A-1C13 B-(en) 09/1999

1-4

Options (continued)

Conduit Thread Adapters

Hawke-Type 1/2 NPT Cable Gland (for use with 1/2 NPT Conduit Connection Code 1) . . . . . . . . . . . . . . . . . . A1

Plastic PG 13.5 Connector (for use with PG 13.5 Conduit Connection Code 2)

(available only with Electrical Safety Codes E & N). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A2

M20 Connector (for use with 1/2 NPT Conduit Connection Code 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . A3

Electronics Housing Features

External Zero Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Z1

Custody Transfer Lock and Seal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Z2

External Zero Adjustment and Custody Transfer Lock and Seal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Z3

Factory Configuration

Digital Output (4 to 20 mA Default if not selected) (Electr. Version D only) . . . . . . . . . . . . . . . . . . . . . . . . . C1

Full Factory Configuration (Requires Configuration Form) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C2

Ermeto Connectors

Steel, Connecting 6 mm Tubing to 1/4 NPT Process Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E1

Steel, Connecting 12 mm Tubing to 1/2 NPT Process Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E2

316 ss, Connecting 6 mm Tubing to 1/4 NPT Process Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E3

316 ss, Connecting 12 mm Tubing to 1/2 NPT Process Connector. . . . . . . . . . . . . . . . . . . . . . . . . . . . . E4

Miscellaneous Optional Selections

Vent Screw In Side of Process Cover............................................V

Five Year Warranty ....................................................W

Supplemental Customer Tag ................................................T

(a) Refer to PSS 2A-1Z9 E for option descriptions, and for additional optional features and accessories not listed in Model Code.

(b) See Functional Specifications section for pressure deratings when certain DIN 19213 versions are specified.

(c) Temperature limits derated to 0 and 60°C (32 and 140°F).

(d) Mounting Set option is not available.