You can easily connect your TZIDC positioner to a PC, e.g., in the
workshop or in the commissioning phase, by using the positioner’s
LKS adapter (LKS = local communication interface).
An RS-232 interface converter adapts the signals on the serial PC
port to the level of the positioner’s LKS.
Pos: 9.7 /Überschriften/1.1/2-spaltig/FSK-Modem @ 10mod_1176215390421_3101.doc @ 77553
4.3 FSK Modem Pos: 9.8 /Technische Daten / Datenblatt/Aktorik/Stellungsregler/TZIDC / TZIDC-200/Kommunikation/FSK-Modem @ 10mod_1176215656328_3101.doc @ 77637
The FSK modem establishes a digital frequency-modulated
communication (Frequency Shift Keying) with the TZIDC positioner.
Tapping is possible at any chosen point of the 20 mA signal line.
We recommend that you use an electrically isolated FSK modem. It is
bus-compatible when used with isolating amplifiers. Even connecting
explosion-protected field devices is possible, on condition that the
FSK modem is run outside the hazardous area.
