parkerRack power supply unit

200-582-922-NHh

(d)

Two DC inputs with screw-terminal connectors that provide a common input to the

RPS6U power supplies.

Supports redundant external power-supply systems.

This rear panel is equivalent to Rear panel for RPS6U power supply order option code F900.

200-582-990-NHh

(e)

One AC input (120/230 VAC) with mains socket and on/off switch that provides a common 

input to the RPS6U power supplies.

This rear panel is equivalent to Rear panel for RPS6U power supply order option code F100.

200-582-910-NHh

(f)

One AC input (120/230 VAC) with screw-terminal connector, on/off switch and rear-panel fuses 

that provides a common input to the RPS6U power supplies.

This rear panel is equivalent to Rear panel for RPS6U power supply order option code F110.

200-582-911-NHh

(g)

One AC input (120/230 VAC) with screw-terminal connector and rear-panel fuses that provides 

a common input to the RPS6U power supplies.

This rear panel is equivalent to Rear panel for RPS6U power supply order option code F120.

200-582-912-NHh

(h)

Two AC inputs (120 VAC only) with mains sockets and on/off switches that provide a common 

input to the RPS6U power supplies.

Supports redundant external power-supply systems.

This rear panel is equivalent to Rear panel for RPS6U power supply order option code F620.

200-582-962-NHh

(i)

Two AC inputs (120/230 VAC) with mains sockets and on/off switches that provide individual 

inputs to the RPS6U power supplies.

This rear panel is equivalent to Rear panel for RPS6U power supply order option code F630.

200-582-963-NHh

(j)

Two AC inputs (230 VAC only) with mains sockets and on/off switches that provide a common 

input to the RPS6U power supplies.

Supports redundant external power-supply systems.

This rear panel is equivalent to Rear panel for RPS6U power supply order option code F600.

200-582-960-NHh

(k)

Two AC inputs (120/230 VAC) with screw-terminal connectors, on/off switches and rear-panel 

fuses that provide individual inputs to the RPS6U power supplies.

This rear panel is equivalent to Rear panel for RPS6U power supply order option code F150.

200-582-915-NHh

(l)

Two AC inputs (120/230 VAC) with screw-terminal connectors and rear-panel fuses that 

provide individual inputs to the RPS6U power supplies.

This rear panel is equivalent to Rear panel for RPS6U power supply order option code F160.

200-582-916-NHh

(m)

One AC input (120/230 VAC) with mains socket and on/off switch and one DC input with screwterminal connector that provide individual inputs to the RPS6U power supplies.

This rear panel is equivalent to Rear panel for RPS6U power supply order option code F700.

200-582-970-NHh

Rack power supply unit

RPS6U

14 / 15 © Meggitt SA / 268-011 / Version 9 / 23.04.2015 / E

Notes

All AC input rear panels are supplied with a mains power supply lead (no lead is supplied for the DC input versions). See Mains power 

supply leads (power cords) on page 14.

AC input rear panels with mains sockets have an IEC type C14 connector (IEC 60320) that mates with the plug (type C13) used by the 

supplied mains power supply leads.

Rear panels with one input – (a), (b), (c), (d), (e), (f) and (g) – are 2 slots wide / 8 HP (TE).

Most rear panels with two inputs – (h), (i), (j), (k) and (l) – are 4 slots wide / 16 HP (TE).

However, the rear panel with AC and DC inputs – (m) is 2 slots wide / 8 HP (TE).

(The width of 19″ rack is measured in horizontal pitch (HP) units of 5.08 mm (0.2″), also known as standard width (TE) units. For the 

ABE04x rack, a one slot wide (one card position) blank panel corresponds to 4 HP (TE), a two slot wide blank panel corresponds to 8 HP (TE) 

and a four slot wide blank panel corresponds to 16 HP (TE).)

Rear panels with two input connectors that provide a common input to the RPS6U power supplies – (d), (h) and (j) – installed in the rack can 

be used with a redundant external power-supply system.

For additional information on the Rear panel for RPS6U power supply order option codes (Fxxx), refer to the ABE040 and ABE042 VM600 

system rack and ABE056 VM600 slimline rack data sheets.

For the Ordering number:

“NHh” represents the hardware version.

“N” is either “0” for a rear panel according to (and marked) CE low voltage directive or “2” for a rear panel according to (and marked) CCSAUS.

“H” increments are for major modifications that can affect product interchangeability.

“h” increments are for minor modifications that have no effect on interchangeability

Mains power supply leads (power cords)

To order please specify the type (Mains power supply lead), designation and ordering number from the table below

Designation Ordering number

None – no mains cable.

This rear panel is equivalent to Mains power supply lead (power cord) order option code H00. ---

No plug – flying lead with wire-end ferrules.

This rear panel is equivalent to Mains power supply lead (power cord) order option code H01. 957.18.13.0020

J plug as per SEV 1011 (Switzerland).

This rear panel is equivalent to Mains power supply lead (power cord) order option code HCH. 957.18.13.0021

E+F plug as per CEE7/VII (Europe, Russia, Ukraine).

This rear panel is equivalent to Mains power supply lead (power cord) order option code HEU. 957.18.13.0022