earlier in this manual to set up the individual parameters. (In this overall example, we have chosen to change the set point of the
parameter 1000 G -P>).
Step 1: Enter the setup menu via SETUP in the fourth display line in the entry window.
Step 2: Enter the protection menu via PROT in the fourth display line in the setup menu.
Step 3: Use the and push-buttons to locate the selected parameter.
Step 4: Enter the set point menu via SP in the fourth display line.
Step 5: Enter password to change the set point.
Step 6: Use the and push-buttons to increase/decrease the set point setting.
Step 7: Move the “underscore” to save and press SEL; the new set point setting has now been saved.