Woodward Product Change Notification 06912

routine’s permissive logic does not allow a module’s Test function to operate if any module is in its

Tripped or Alarmed State (user configurable).

15. Added the ability to configure/select the screen to be shown as the Home Screen.

16. Added a configurable option to not jump to Home Screen on a trip condition.

17. Added an Overspeed Setpoint analog read value/register to Modbus® * communications.

* Modbus is a trademark of Schneider Automation Inc.

18. Added the ability to configure the module’s Trip Latch function to be latching or non-latching.

19. Added the option to configure a module’s Speed Probe Type to “Passive”, “Active”, and “Not Used”.

The “Not Used” option allows users to wire two speed probes into only two of the ProTech-GII

modules, and not have related nuisance alarms.

20. Added Date & Time Stamp information to the Peak Speed/Acceleration Log.

21. Added a configurable option to include the module’s trip state into the module’s Alarm Latch logic. This

capability allows any module trip to be indicated as a module Alarm condition also and functions the

same as the original ProTech 203 logic.

22. Added an option for users to issue a module trip command when entering the module’s “Configuration”

mode. Note: Entry of the “Configuration Level” password is required for users to issue module trip

command from the module’s front panel.

23. Added a configuration change time stamp function which records and displays the date and time of the

last configuration change was saved to memory (via the front panel or service tool).

The following table shows the new “preferred” ProTech-GII part numbers:

Description

Number

ProTech-GII – Bulkhead Mount, HV/LV, ind. relay 8237-1244 8237-1594

ProTech-GII – Bulkhead Mount, HV/HV, ind. relay 8237-1245 8237-1595

ProTech-GII – Bulkhead Mount, HV/LV, voted relays 8237-1246 8237-1596

ProTech-GII – Bulkhead Mount, HV/HV, voted relays 8237-1247 8237-1597

ProTech-GII – Bulkhead Mount, HV/HV, voted relays – limited front panel config. 8237-1656 8237-1597

ProTech-GII – Panel Mount, HV/LV, ind. relay 8237-1367 8237-1598

ProTech-GII – Panel Mount, HV/HV, ind. relay 8237-1368 8237-1599

ProTech-GII – Panel Mount, HV/LV, voted relays 8237-1369 8237-1600

ProTech-GII – Panel Mount, HV/HV, voted relays 8237-1370 8237-1601

ProTech-GII – Panel Mount, HV/HV, voted relays – limited front panel config. 8237-1660 8237-1601

Spare Module for ProTech models 8237-1596 & 8237-1600 5437-1119 5437-1124

Spare Module for ProTech models 8237-1597 & 8237-1601 5437-1120 5437-1125

Spare Module for ProTech models 8237-1594 & 8237-1598 5437-1121 5437-1126

Spare Module for ProTech models 8237-1595 & 8237-1599 5437-1122 5437-1127