DCS Industrial control system
NameDescriptionContent
NEW CENTER
Current Location:

EMERSONSuspension Concentrate (SC) for Mite Management on Commercial Ornamental Plants in Greenhouses, Saran and Shade Houses, Outdoor Containers, and Field Grown Nursery Stock

From:EMERSON | Author:LIAO | Time :2025-08-18 | 725 Browse: | 🔊 Click to read aloud ❚❚ | Share:

Suspension Concentrate (SC) for Mite Management on Commercial Ornamental Plants in Greenhouses, Saran and Shade Houses, Outdoor Containers, and Field Grown Nursery Stock

• Excellent for IPM programs for mite control.

• New class of chemistry ideal for use with other miticides to prevent resistance.

• Control of many species of mites.

• Long residual control up to 45 days.

• Can be tank mixed with other miticides or insecticides to broaden the spectrum of

pests controlled.

ACTIVE INGREDIENT: Percent By Weight

Clofentezine (3,6-bis (2-chlorophenyl) -

1,2,4,5-tetrazine) .............................................. 42%

OTHER INGREDIENTS ....................................... 58%

TOTAL 100%

Contains 1 pound of active ingredient per quart (32 fl. oz.).

KEEP OUT OF REACH OF CHILDREN

CAUTION

FIRST AID

IF ON SKIN OR CLOTHING: Take off contaminated clothing. Rinse

skin immediately with plenty of water for 15-20 minutes. Call a

poison control center or doctor for treatment advice.

IF IN EYES: Hold eye open and rinse slowly and gently with water

for 15-20 minutes. Remove contact lenses, if present, after the

first 5 minutes, then continue rinsing the eye. Call a poison

control center or doctor for treatment advice.

PRECAUTIONARY STATEMENTS

HAZARDS TO HUMANS

AND DOMESTIC ANIMALS

CAUTION

Avoid contact with skin, eyes, or clothing. Wash thoroughly

with soap and water after handling. Remove contaminated

clothing and wash before reuse.

PERSONAL PROTECTIVE EQUIPMENT (PPE)

Some materials that are chemical-resistant to this product

are listed below. If you want more options, follow the

instructions for category C on an EPA chemical resistance

category selection chart.

Applicators and other handlers must wear:

• Long-sleeved shirt and long pants

• Chemical-resistant gloves, such as barrier laminate,

butyl rubber, nitrile rubber, neoprene rubber, poly-vinyl

chloride (PVC), or Viton.

• Shoes plus socks

Follow manufacturer’s instructions for cleaning/maintaining

PPE. If no such instructions for washables, use detergent

and hot water. Keep and wash PPE separately from other

laundry.

ENGINEERING CONTROLS STATEMENT

When handlers use closed systems, enclosed cabs, or aircraft

in a manner that meets the requirements listed in the Worker

Protection Standard (WPS) for agricultural pesticides [40 CFR

Part 170.240 (d) (4-6)], the handler PPE requirements may be

reduced or modified as specified in the WPS.

USER SAFETY RECOMMENDATIONS

Users should:

• Wash hands before eating, drinking, chewing gum, using

tobacco, or using the toilet.

ENVIRONMENTAL HAZARDS

For terrestrial uses, do not apply directly to water, or to areas

where surface water is present, or to intertidal areas below

the mean high water mark. Do not apply within 100 feet of

lakes, reservoirs, rivers, permanent streams, marshes, natural ponds, estuaries, and commercial fish farm ponds. Do not

apply when weather conditions favor drift from treated area.

Do not allow spray to drift off of crop, especially when

spraying outer rows. Always direct spray into the crop. Do

not contaminate water when disposing of equipment 

washwaters.

IMPORTANT — Read the entire Directions for Use and Disclaimer

of Warranties before using this product.

Distributed by:

Scotts-Sierra Crop Protection Company

14111 Scottslawn Road

Marysville, OH 43041

1-800-492-8255

EPA Reg. No. 432-946-58185

EPA Est. No. 264-DEU-007, Aventis-Wolfenbuttel, Germany

NET CONTENTS: 1 pint (473 ml)

©2000, The Scotts Company. World rights reserved.

Ovation™ SC is a registered trademark of Scotts-Sierra Crop Protection Company for

its brand of plant protection products.

Suspension Concentrate (SC)

for Mite Management on

Commercial Ornamental

Plants in Greenhouses,

Saran and Shade Houses,

Outdoor Containers, and

Field Grown Nursery Stock

O

STORAGE AND DISPOSAL

PROHIBITIONS: Do not contaminate water, food or feed

by storage or disposal.

STORAGE: Store in original container, tightly closed, in a

safe place.

PESTICIDE DISPOSAL: Wastes resulting from the use of

this product may be disposed of on site or at an approved

waste disposal facility.

CONTAINER DISPOSAL: Triple rinse (or equivalent).

Then offer for recycling or reconditioning, or puncture

and dispose of in a sanitary landfill, or by incineration,

or, if allowed by State and local authorities, by burning.

If burned, stay out of smoke.

DO NOT RE-USE EMPTY CONTAINER


DIRECTIONS FOR USE

It is a violation to Federal law to use this product in a manner

inconsistent with its labeling.

Do not apply this product in a way that will contact workers

or other persons, either directly or through drift. Only

protected handlers may be in the area during application.

For any requirements specific to your State or Tribe, consult

the agency responsible for pesticide regulation.

AGRICULTURAL USE REQUIREMENTS

Use this product only in accordance with its labeling and

with the Worker Protection Standard, 40 CFR Part 170.

This Standard contains requirements for the protection

of agricultural workers on farms, forests, nurseries, and 

greenhouses, and handlers of agricultural pesticides.

It contains requirements for training, decontamination,

notification, and emergency assistance. It also contains 

specific instructions and exceptions pertaining to the 

statements on this label about personal protective 

equipment (PPE) and restricted-entry interval.

The requirements in this box only apply to uses of this 

product that are covered by the Worker Protection Standard.

Do not enter or allow worker entry into treated areas during

the restricted entry interval (REI) of 12 hours.

PPE required for early entry to treated areas that is permitted

under the Worker Protection Standard and that involves 

contact with anything that has been treated, such as plants,

soil, or water, is:

• Coveralls

• Chemical-resistant gloves such as barrier laminate, butyl 

rubber, nitrile rubber, neoprene rubber, poly-vinyl chloride

(PVC), or Viton

• Shoes plus socks

GENERAL INFORMATION

Ovation SC Ovicide/Miticide is recommended for use on ornamental

plants, (including but not limited to, conifers and non-bearing trees and

vines, carnations, chrysanthemums, diffenbachia, geraniums, impatiens,

hydrangeas, potentillas, scheffleras, and roses) in greenhouses, saran and

shade houses, outdoor container, and field grown ornamental nursery

stock for management of plant-feeding mites.

Ovation SC is highly active on mite eggs and early mite stages. It has

shown activity and persistence up to 45 days after application. Proper

timing of application, based on the utilization of scouting, may delay or

eliminate the need for subsequent applications of other miticides.

MIXING INSTRUCTIONS

Add the appropriate amount of Ovation SC to a partially filled spray

tank under agitation. After adding Ovation SC, other tank mix

components (adjuvants, fungicides, insecticides), if required, may be

added along with sufficient water to bring to the proper volume.

Maintain agitation.

Adjuvant Addition:

Often addition of adjuvants (stickers, spreaders, spreader-stickers,

dormant oils, etc.) will aid in the performance of plant protection 

products under certain conditions. Generally, an adjuvant is not

required with Ovation SC where adequate spray coverage is achieved.

Should inadequate spreading of the Ovation SC spray occur, the 

addition of a spreader or spreader-sticker may be considered. If 

addition is warranted, trial applications must be followed, using the

instructions in the section below “Notice to Users” as phytotoxicity 

can result from such additions.

pH Stability/Compatibility with Other Products:

Ovation SC is extremely stable over a wide range of pH. It has proven

to be physically and chemically stable in tank mixes with a wide range

of other plant protection products. If tank mixing is planned, evaluate

both the physical and chemical (phytotoxicity) compatibility on a

selected group of plants prior to full scale use. See “Notice to Users”

section below.

Notice to Users:

Ovation™ SC has demonstrated excellent plant safety, however,

all species and varieties of ornamental plant types have not been

tested. If a user wishes to make an application to an ornamental

plant type not listed on the label but found on a similar use site

and for a pest that is listed on the label, it is suggested that a trial

application be performed first.

For trial application, make 2 applications at a 7 day interval,

2 fl. oz. per 100 gal., to 25 or more test plants grown under 

conditions similar to those under which the plants will be grown

full scale. Wait 7 days after last application for final observation

for phytotoxicity.

Ovation™ SC is magenta in color and may leave a residue on

light colored flowers or foliage.

APPLICATION RECOMMENDATIONS

Ovation SC Ovicide/Miticide is recommended at a concentration 

of 2 fl. oz. per 100 gal. when used in high volume sprays using

hand-held equipment. For low and ultra-low volume applications,

apply 4-8 fl. oz. per acre, per application Applications irrespective

of delivery method should not exceed 8 fl. oz. per acre.

Spray application should be directed in a manner to cover all

plant surfaces, especially the undersides of leaves.

Do not apply this product through any type of irrigation system.

Frequency:

Ovation SC application is recommended only once per each crop

cycle in greenhouse and saran and shade house culture. For 

outdoor ornamentals, Ovation SC application is recommended

once per each crop cycle occurring within a year.

Mites Controlled:

Two-spotted spider mite European red mite

Pacific spider mite Yellow spider mite

McDaniel spider mite

Control is achieved through direct spray contact or by mite

contact with Ovation SC residue on the treated foliage.

Timing:

Ovation SC is most effective in mite management when applied

at the first sign of mite activity and egg laying. At that time, the

susceptible female mite, egg and first stage mite largely or totally

make up the population. If a high population of adult mites are

present at the time of application, Ovation SC should be tank

mixed with an adult miticide. Test any tank mix for physical compatibility and crop phytotoxicity before broad scale application.

RESISTANCE MANAGEMENT

Ovation SC is an excellent tool for growers to use in their mite

resistance management program. Proper application timing of

Ovation SC may delay or reduce the number of subsequent 

applications of other miticides, extending their effective life as

mite management products.

IPM / COMPATIBILITY WITH BENEFICIAL

MITES, PREDATORY INSECTS, ETC. 

Ovation SC has proven to have limited to no effect on beneficial

insects, particularly predatory mites. Ovation SC can be 

effectively and safely used in IPM programs employing 

beneficial insects.

MPORTANT NOTICE:

DISCLAIMER AND LIMITATION OF LIABILITY

This product has been researched to provide necessary data 

to support its use on ornamental plants. The user should always

follow the label directions and exercise judgment and caution

when using this product under their growing conditions. NO

WARRANTY OR REPRESENTATION IS MADE, EXPRESS OR IMPLIED,

CONCERNING THE RESULTS OBTAINED FROM THE USE OF THIS

PRODUCT. The exclusive remedy of the user or Buyer, and the

limit of liability of The Scotts Company or its affiliates, for any and

all losses, injuries or damages resulting from the use or handling

of this product shall be the purchase price paid by the user or

Buyer for the quantity of this product involved. The Buyer and all

users are deemed to have accepted the terms of this Notice,

which may be varied only by agreement in writing, signed by a

duly authorized representative of The Scotts Company


  • CTI 2500-ADP2-DISC Discrete Wiring Adapter for Series 500
  • CTI 2500-ADP1 Analog Wiring Adapter for Series 500
  • CTI 2500C-RADP-RS485 Remote Base Controller Adapter for Series 500
  • CTI 2500C-RADP-RBC Profibus RBC Adapter for Series 500
  • CTI 2500C-PADP-120V 120VAC 50W Power Supply for Series 500
  • CTI 2500-RADP RBC Adapter for Series 500
  • CTI 2500-R4500 520/530/DBC Adapter for Series 500 - MATURE
  • CTI 2500-PADP Power Supply Adapter for Series 500
  • CTI 2500-IADP I/O Adapter for Series 500
  • CTI 2500-VP15A-N4-W7 15" Flat-Panel PC with Windows® 7 Embedded
  • CTI 2500S-27-1750 Slice I/O, Ethernet, RS232/485. 900MHz, 2DIO / 4UAI / 2AI
  • CTI 2500S-26-1750 Slice I/O, Ethernet, RS232/485. 900MHz, 8DIO / 2UAI
  • CTI 2500S-23-1750 Slice I/O, Ethernet, RS232/485. 900MHz, 4DI / 4DO / 2UAI / 2AO
  • CTI 2500S-27-1550 Slice I/O, RS232/485. 2DIO / 4UAI / 2AI
  • CTI 2500S-26-1550 Slice I/O, RS232/485. 8DIO / 2UAI
  • CTI 2500S-23-1550 Slice I/O, RS232/485. 4DI / 4DO / 2UAI / 2AO
  • CTI 2500S-27-1050 Slice I/O, Ethernet, 2DIO / 4UAI / 2AI
  • CTI 2500S-26-1050 Slice I/O, Ethernet, 8DIO / 2UAI
  • CTI 2500S-23-1050 Slice I/O, Ethernet, 4DI / 4DO / 2UAI / 2AO
  • CTI 2500C-32F-CJC 32-Pin Field Wiring Connector with Cold Junction Compensation
  • CTI 2500C-32F 32-Pin Field Wiring Connector
  • CTI 2500C-8-TC Eight Thermocouple Inputs
  • CTI 2500C-8-RTD Eight RTD Inputs
  • CTI 2500C-8-RL-FC 8 Form-C Relay Outputs
  • CTI 2500C-8-IDO-24V 8 Isolated 24VDC Outputs
  • CTI 2500C-8-IDO-120V 8 Isolated 120VAC Outputs
  • CTI 2500C-16-DO-24V Sixteen 24VDC Digital Outputs
  • CTI 2500C-16-DO-120V Sixteen 120VAC Digital Outputs
  • CTI 500C-16-IDI-24V Sixteen Isolated 24V AC/DC Digital Inputs
  • CTI 2500C-16-IDI-120V Sixteen Isolated 120V AC/DC Digital Inputs
  • CTI 2500C-16-DIDO-SIM Sixteen Digital Input and Output SImulator
  • CTI 2500C-16-DI-24V Sixteen 24V AC/DC Digital Inputs
  • CTI 2500C-16-DI-120V Sixteen 120V AC/DC Digital Inputs
  • CTI 2500C-RBC-RS485 RS485 Remote Base Controller
  • CTI 2500C-RBC-PRF Profibus Remote Base Controller
  • CTI 2500C-PS-24V-35 35-Watt DC Power Supply
  • CTI 2500C-PS-120V-35 35-Watt AC Power Supply
  • CTI 2500C-R8 Eight-Slot Base
  • CTI 2500C-R4 Four-Slot Base
  • CTI 2500C-R16 Sixteen-Slot Base
  • CTI 2500C-2572-B Fast Ethernet TCP/IP Adapter
  • CTI 2500C-J750 Compact Janus PAC with 3MB Project Memory
  • CTI 2500C-C300 CPU with 512K User Memory
  • CTI 2500C-C200 CPU with 256K User Memory
  • CTI 2500C-C100 CPU with 128K User Memory
  • CTI 2500C-8-AO 8 Analog Outputs
  • CTI 2500C-8-AI 8 Analog Inputs
  • CTI 2559-FCAL Precision Calibration Connector
  • CTI 2559-FPC 40-Position Screw-Terminal Connector
  • CTI 2500-RFC PLC to RF Modem Cable
  • CTI 2500-40F 40-Position Standard Screw-Terminal Connector
  • CTI 2505 Vibration Sensor Interface Module
  • CTI 2554-A 4-Channel Isolated High Speed Counter Module
  • CTI 2553-A 2-Channel Mag Meter Input Module
  • CTI 2502 2-Channel High Speed Counter Input Module
  • CTI 2559-TC 8-Channel Thermocouple Input Module
  • CTI 2556-A 16-Channel Isolated Thermocouple Input Module
  • CTI 2556 16-Channel Isolated Thermocouple Input Module
  • CTI 2551-A 8-Channel Isolated Thermocouple Input Module
  • CTI 2559-RTD 8-Channel RTD Input Module
  • CTI 2557-A 16-Channel RTD Input Module
  • CTI 2557 16-Channel RTD Input Module
  • CTI 2552-A 8-Channel Isolated RTD Input Module
  • CTI 2534 8-Point Form-C Relay Output Module
  • CTI 2532 16-Point Form-A Relay Output Module
  • CTI  2531 32-Point Form-A Relay Output Module
  • CTI  2530 8-Point Form-C Relay Output Module
  • CTI  2562 8-Channel Analog Output Module
  • CTI  2560-A 8-Channel Isolated Analog Output Module
  • CTI  2501 8in/4out Analog Module
  • CTI  2558 8-Channel Analog Input Module
  • CTI  2555-A 16-Channel Analog Input Module
  • CTI  2550-A 8-Channel Isolated Analog Input Module
  • CTI  2599 8/16/32-Point AC Output Module
  • CTI  2598-8 8-Point AC Output Module
  • CTI   2598 8/16-Point AC Output Module
  • CTI   2597 8/16/32-Point DC Output Module
  • CTI 2596-8 8-Point DC Output Module
  • CTI 2596 8/16-Point DC Output Module
  • CTI 2595 16-Point TTL/Word Output Module
  • CTI 2591-EF 16-Point Isolated 11-146 VDC Output with Front Panel Accessible Fuses
  • CTI 2591-A 16-Point Isolated 11-146 VDC Output Module
  • CTI 2590-EF 16-Point Isolated 20-132 VAC Output with Front Panel Accessible Fuses
  • CTI 2590-A 16-Point Isolated Discrete 20-132 VAC Output Module
  • CTI 2589-B 8/16/32-Point Universal Discrete Input Module
  • CTI 2589-A 8/16/32-Point Universal Discrete Input Module
  • CTI 2588-8 8-Point Universal Discrete Input Module
  • CTI 2585 16-Point TTL/Word Input Module
  • CTI 2582 16-Point Isolated 125 VDC Input Module
  • CTI 2581 16-Point Isolated 12-56 VDC Input Module
  • CTI 2580 16-Point Isolated 95-132 VAC Input Module
  • CTI 2500-TAP RS485 Network Tap
  • CTI 2500-RIO-B RS485 Remote Base Controller
  • CTI 2500-RIO-A RS485 Remote Base Controller
  • CTI 2500-RBC Profibus Remote Base Controller
  • CTI 2515-A 100-Watt AC/DC Power Supply with Redundancy Support
  • CTI 2515 100-Watt AC Power Supply (MATURE - replaced by 2515-A)
  • CTI 2513-A 75-Watt DC Power Supply with Redundancy Support
  • CTI 2513 75-Watt 24VDC Power Supply
  • CTI 2512-A 75-Watt AC/DC Power Supply with Redundancy Support
  • CTI 2512 75-Watt AC/DC Power Supply
  • CTI 2510 125 VDC Power Supply
  • CTI 2500-SSB Single Slot Blank Front Panel
  • CTI 2500-R11-A Eleven-Slot Redundant Base
  • CTI 2500P-R16 Sixteen-Slot Base with High-Speed Channel
  • CTI 2500P-R8 Eight-Slot Base with High-Speed Channel
  • CTI 2500P-R4 Four-Slot Base with High-Speed Channel
  • CTI 2541 Redundant Processor Manager Module
  • CTI 2577 Profibus DP Slave Adapter
  • CTI 2573-MOD Serial Interface Adapter with MODBUS
  • CTI 2572-AF Fast Ethernet TCP/IP Adapter with Optical Fiber Connection
  • CTI 2572-A Fast Ethernet TCP/IP Adapter
  • CTI 2572 Ethernet TCP/IP Adapter
  • CTI 2572-B Fast Ethernet TCP/IP Adapter
  • CTI 2576 DeviceNet™ Scanner Module (MATURE)
  • CTI 2500P-ECC1 Ethernet Communications Coprocessor
  • CTI 2500P-JACP Janus Application Coprocessor
  • CTI 2500P-ACP1 Application Coprocessor (MATURE - replaced by 2500P-JACP)
  • CTI 2500P-J450 Janus PAC with 2MB Project Memory
  • CTI 2500-C400 CPU with 3072K User Memory
  • CTI 2500-C300 CPU with 512K User Memory
  • CTI 2500-C200 CPU with 256K User Memory
  • CTI 2500-C100 CPU with 128K User Memory
  • CTI 2500P-J750 Janus PAC with 3MB Project Memory
  • Shinkawa WHF3006M Displacement Converter
  • Shinkawa JBP-220 (P-24-94A / P-24-94B) Circuit Board Module
  • SHINKAWA   WKN-142K5  2-WIRE VIBRATION TRANSDUCER
  • Shinkawa FRP-321 (P-26-54A / P-26-54B) Circuit Board Module