ABB Medium Voltage Drives ACS2000

ACS 2000 Drive Manuals

General Manuals ACS2000 User’s Manual 

− Safety 

− Power Electronics and Cabinet Features 

− Control System 

− Transportation, Storage and Disposal 

− Mechanical Installation

− Electrical Installation 

− Commissioning 

− Local Operation 

− CDP Control Panel 

− Troubleshooting and Maintenance ACS2000 Appendices 

− Maintenance Schedule 

− Fieldbus Adapters 

− Technical Data 

− Mechanical Drawings 

− Electrical Drawings 

− Spare Parts Manual 

− MV Switchgear Guide 

− Cable Specification 

− Induction Motor Specification

− Pulse Encoder 

− Motor Temperature Supervision 

− Signal and Parameter Table 

− Troubleshooting Guide 

− DriveMonitorTM Manual

Meaning of safety instructions Safety instructions are used to highlight a potential hazard when working on the equipment. Safety instructions must be strictly followed! Noncompliance can jeopardize the safety of personnel, the equipment and the environment.

DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury.

WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury.

CAUTION indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.

NOTICE is used to address practices not related to personal injury. NOTICE The safety instructions are derived from the following standards: – ISO 3864-2:2004 (E) Graphical symbols 

– Safety colors and safety signs 

– Part 2: Design principles for product safety labels 

– ANSI Z535.6 American National Standard for Product Safety Information in Product Manuals, Instructions, and Other Collateral Materials

The ACS2000 4KV has three sections, the Incoming/Control section, the Input Filter (IFU) section and the Phase Module section. This manual is divided, by frame size, into those sections showing the corresponding spare parts in each section. ABB reserves the right to change part numbers at any time. If you have difficulty identifying the part you need, please feel free to contact Technical Suppor.

Parts can be ordered online at www.abbnow.com or by calling 1-800-752-0696 (US Only) or 1-262-785-3200 (International) Option 1.

Incoming/Control Section

Frame 1 Enclosure Design

Incoming/Control Section

Technical Notes

Note 1 - Frame 2: Replacement of inrestors ABB part number 2UEA003150 has replaced part number 3BHB024327R0001. This has also changed the inrestor configuration from a quantity four (4) inrestors to a quantity of two (2). Please note: If your drive currently utilizes part 3BHB024327R0001 and one of the inrestors fails, all (4) inrestors will need to be removed and replaced with two (2) part number 2UEA003150 inrestors. Note 2 - Frame 3: Clamp inductors 2UEA003213 is the new ABB part number for the clamp inductors used in all Frame 3 units going forward. EXCEPTION: ABB part number 2UEA002974 will be used in units registered with any of the following serial numbers: 2131402054, 2131400989, 2131703324, 2131800104, 2132001102, 2132100102, 2132202416, 2132303473, 2132400343, 2132503681, 2133001095, 2133104388, 2133301488, 2134902217, 2140603274, 2140604672.