HoneywellUDC1200 & UDC1700 Universal Digital Controllers Series Micro-Pro Specifications 51-52-03-35 June 2011

a “high limit” unit where the delay will de-energize when the 

PV is above the limit setpoint, or a “low limit”, where the 

relay will drop out when the PV falls below the setpoint. 

A LED indicator shows when limits have been exceeded, 

and when the relay is latched out. 

The optional digital input allows a remote reset function. 

Remote Setpoint Model 

The UDC1700 1/8 DIN "R" model controller has a second 

input available that accepts either a linear or potentiometer 

input signal as a remote setpoint. The input signals 

accepted are field-configurable and are: 0-5 V, 1-5 V, 0-10 

V, 2-10 V, 0-20 mA, 4-20 mA (factory set), 0-50 mV, 10-50 

mV, 0 100 mV, or 0-2000 ohms. This allows the controller 

to act as a "slave" controller accepting a setpoint value from 

a 'master' device such as a PLC or setpoint-programming 

controller (such as the DCP50, DCP100, DCP300, or 

DCP550 series). 

The UDC1700R also includes a standard digital input 

allowing remote switching between the local setpoint and 

the remote setpoint value. Also standard in this model is 

"fuzzy" autotune software that minimizes process variable 

overshoot when responding to a setpoint change. 

PC Software 

The UDC1200 & 1700 are supported with PC software 

allowing you to quickly configure your device using 

configuration wizards, or to perform diagnostics

Warranty/Remedy 

Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Contact your local 

sales office for warranty information. If warranted goods are returned to Honeywell during the period of coverage, Honeywell 

will repair or replace without charge those items it finds defective. The foregoing is Buyer's sole remedy and is in lieu of all 

other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. 

Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this 

printing. However, we assume no responsibility for its use. 

While we provide application assistance personally, through our literature and the Honeywell web site, it is up to the 

customer to determine the suitability of the product in the application