FOXBORO Z-Module Control Processor 270 (ZCP270)

Meets: Class A Limits

IEC 61000-4-2 ESD Immunity

Contact 6 kV, air 8 kV

IEC 61000-4-3 Radiated Field Immunity

10 V/m at 80 to 1000 MHz

IEC 61000-4-4 Electrical Fast

Transient/Burst Immunity

±2 kV on I/O, dc power and communication

lines

IEC 61000-4-5 Surge Immunity

±2 kV on ac and dc power lines; ±1 kV on

I/O and communications lines

IEC 61000-4-6 Immunity to Conducted

Disturbances Induced by Radio-frequency

Fields

10 V (rms) at 150 kHz to 80 MHz on I/O,

dc power and communication lines

IEC 61000-4-8 Power Frequency Magnetic

Field Immunity

30 A/m at 50 and 60 Hz

SECURITY

Wurldtech Achilles Certification™ Level One

ENVIRONMENTAL SPECIFICATIONS(2)

Operating

TEMPERATURE

0 to +60°C (+32 to +140°F)

RELATIVE HUMIDITY

5 to 95% (Noncondensing)

ALTITUDE-300 to +3.000 m (-1.000 to +10.000 ft)

VIBRATION

0.5 g (5 to 500 Hz)

Configuration

Single-width processor module. The fault-tolerant

version consists of two single-width processor

modules, with an interconnecting fault-tolerant

connector.

Mass (Maximum)

1.7 kg (3.75 lb) for a single, non-fault-tolerant module.

Mounting

May be placed in any of the following I/A Series

mounting structures:

 1x8 Mounting Structure

 2x8 Mounting Structure(3)

In the fault-tolerant version, the two modules must be

mounted in adjacent mounting structure slots to allow

for installation of the interconnecting fault-tolerant

connector.

Dimensions - Module

HEIGHT

228 mm (8.97 in)

WIDTH

34.3 mm (1.35 in)

DEPTH

447 mm (17.6 in)

Storage

TEMPERATURE-40 to +70°C (-40 to +158°F)

RELATIVE HUMIDITY

5 to 95% (Noncondensing)

ALTITUDE-300 to +12.000 m (-1.000 to +40.000 ft)

PHYSICAL SPECIFICATIONS

Fiber Optic Cabling – Ethernet Switch to

ZCP270

CONNECTORS

Ethernet Switch Connector

One MT-RJ Connector

ZCP270 or Splitter/Combiner Connector

Two ceramic type LC connectors with clip

Fiber Optic Cabling – Ethernet Switch to

ZCP270 (Continued)

FIBER OPTIC CABLE

Cable Material

Multi-mode fiber (MMF) 62.5/125 µm plenum

Cable Lengths

3 m (9.9 ft), 15 m (49.5 ft), 50 m (165 ft)

greater than 50 m – user supplied

Maximum Length

2 km (6.560 ft) from the Ethernet switch to

the ZCP270.

Fiber Optic Cabling – Splitter/Combiner to

ZCP270

CONNECTORS

Two ceramic type LC connectors with clip on

each end

FIBER OPTIC CABLE

Cable Material

Multi-mode fiber (MMF) 62.5/125 µm

Cable Lengths

0.5 m (1.6 ft), 1.0 m (3.3ft), 3.0 m (9.9 ft),

15 m (49.5 ft), 50 m (165 ft)

greater than 50 m – user supplied

Maximum Length

2 km (6.560 ft) total from the Ethernet switch

to the ZCP270. including the cabling to the

splitter/combiner.