ABBACS5000 water-cooledUser manual

1.3. Related documents The following documents are available for supplementary information:

Table 1-1 Maintenance Title Document number ACS5000 preventive maintenance schedule 3BHS855274 E01 Table 1-2 Technical data Title Document number Technical data from DriveSmart(1) (1) Configuration software for medium voltage drives Table 1-3 Schematics Title Document number Layout drawing Project-specific Table 1-4 Specifications and guidelines Title Document number Generic transformer specification 3BHS356582 E01 Generic motor specification 3BHS824803 E01 Main circuit breaker engineering guideline 3BHS125149 E50 ACS5000 power cable specification 3BHS215798 E01 Power cables engineering guideline 3BHS542290 E01 Auxiliary power and control cables guideline 3BHS813742 E01 Customer interface 3BHS347034 E03 Table 1-5 Manuals Title Document number ACS5000 Service manual 3BHS264270 E20 Air-cooled excitation units user manual 3BHS252500 E01 Table 1-6 I/O interface Title Document number S800 I/O Getting started(1) (1) Also available online in the ABB Library (https://library.abb.com) 3BSE020923 S800 I/O Modules and Termination Units(1) 3BSE020924

1.4. Terms and abbreviations The following table lists terms and abbreviations you should be familiar with when using this user manual. Some of the terms and abbreviations used in this user manual are unique to ABB and might differ from the normal usage. Table 1-7 Serial communications interfaces Title Document number Ethernet - NETA-21 remote monitoring tool user manual(1) 3AUA0000096939 Modbus - NMBA-01 installation and start-up guide(1) 3AFY58919772 Profibus - NPBA-12 installation and start-up guide(1) 3BFE64341588 (1) Also available online in the ABB Library (https://library.abb.com) Table 1-8 Terms and abbreviations

Term/Abbreviation Definition AMC The application and motor controller (AMC) is a digital signal processor and the heart of the drive control system. Converter Short form for ACS5000 frequency converter COU The control unit (COU) consists of a control section, a customer interface section and a terminal section. The control section incorporates the hardware for control, monitoring and protection functions of the drive and the communication interface to the door-mounted CDP control panel. The COU compartment also incorporates the grounding frame for cable screens and the ground cable, the grounding accessories and the motor terminal section. CVMI Current voltage measurement interface Drive Synonym for ACS5000 frequency converter DriveDebug DriveDebug is part of ABB’s DriveWare® software tools for devices using the DDCS communications protocol. DriveDebug runs on computers with Microsoft Windows® operating systems. DriveDebug is a specialist tool used to diagnose, tune and troubleshoot frequency converters. DriveWindow DriveWindow is a DriveWare® product. DriveWindow is a 32-bit Microsoft Windows® application for commissioning and maintaining ABB drives equipped with optical communication links. DriveMonitor DriveMonitor is a monitoring and diagnostics system that allows secure access to the frequency converter via the Internet from a remote location. DriveMonitor provides long-term monitoring functions that allow to infer equipment status and improve equipment performance. EAF Earth fault monitoring EMC Electromagnetic compatibility

Table 1-8 Terms and abbreviations (continued)

Term/Abbreviation Definition

EOI Electrical-optical interface Equipment Frequency converter and related equipment EXU The excitation unit (EXU) is part of the drive when a synchronous motor has to be supplied with excitation power. Ground Earth To ground To connect the electrical equipment to the earth, eg, by a grounding set or a grounding switch. I/O device Term of ABB’s S800 I/O process system. An I/O device consists of a module termination unit (MTU) and one I/O module. I/O module Term of ABB’s S800 I/O process system. The I/O module is an active input or output device for digital or analog signals. I/O station Term of ABB’s S800 I/O process system. The I/O station typically consists of a bus modem and several input and output devices. IGCT Integrated gate-commutated thyristor IPS Insulated power supply LED Light emitting diode LSU Line supply unit (rectifier phase module) MCB The main circuit breaker (MCB) is a major protection device of the drive system and connects and / or disconnects the main power supply to the drive. Motor terminal section This is the customer terminal for connecting motor cables. It is located behind the swing frame of the COU compartment. NP Neutral point OEI Optical-electrical interrupter PCU A primary phase converter unit (PCU) consists of a transformer terminal section, a rectifier stack, a DC link and an inverter stack. A secondary phase converter unit consists of a DC link and an inverter stack. Phase module The phase module is a compact assembly of wired components including power semiconductors and circuit boards that serves as a standardized building block for the inverter and rectifier stack. PICW Person in charge of work PINT Pulse interface PPE Personal protective equipment PTW Permit to work SW Software S800 I/O The S800 I/O is a distributed process input / output system that can be connected to various process controllers from ABB and other companies.