EMERSONEnterasys® A4 Fast Ethernet Switch

Safety Information

Class 1 Laser Transceivers

The single mode interface modules use Class 1 laser transceivers. 

Read the following safety information before installing or operating these modules.

The Class 1 laser transceivers use an optical feedback loop to maintain Class 1 operation limits. This control loop eliminates the

need for maintenance checks or adjustments. The output is factory set, and does not allow any user adjustment. Class 1 Laser

transceivers comply with the following safety standards:

• 21 CFR 1040.10 and 1040.11 U.S. Department of Health and Human Services (FDA).

• IEC Publication 825 (International Electrotechnical Commission).

• CENELEC EN 60825 (European Committee for Electrotechnical Standardization).

When operating within their performance limitations, laser transceiver output meets the Class 1 accessible emission limit of all

three standards. Class 1 levels of laser radiation are not considered hazardous.

When the connector is in place, all laser radiation remains within the fiber. The maximum amount of radiant power exiting the

fiber (under normal conditions) is ‐12.6 dBm or 55 x 10‐6 watts.

Removing the optical connector from the transceiver allows laser radiation to emit directly from the optical port. The maximum

radiance from the optical port (under worst case conditions) is 0.8 W cm‐2 or 8 x 103 W m2 sr‐1.

Do not use optical instruments to view the laser output. The use of optical instruments to view laser output increases eye

hazard. When viewing the output optical port, power must be removed from the network adapter.

Safety Compliance

Warning: Fiber Optic Port Safety

Avertissment: Ports pour fibres optiques - sécurité sur le plan optique

Warnhinweis: Faseroptikanschlüsse - Optische Sicherheit

When using a fiber optic media expansion module, never look at the transmit laser

while it is powered on. Also, never look directly at the fiber TX port and fiber cable

ends when they are powered on.

Ne regardez jamais le laser tant qu’il est sous tension. Ne regardez jamais

directement le port TX (Tramsmission) à fibres optiques et les embouts de câbles à

fibres optiques tant qu’ils sont sous tension.

Niemals ein Übertragungslaser betrachten, während dieses eingeschaltet ist.

Niemals direkt auf den Faser‐TX‐Anschluß und auf die Faserkabelenden schauen,

während diese eingeschaltet sind.

Declaration of Conformity

Application of Council Directive(s): 2004/108/EC

2006/95/EC

Manufacturer’s Name: Enterasys Networks, Inc.

Manufacturer’s Address: 50 Minuteman Road

Andover, MA 01810

USA

European Representative Name: Enterasys Networks, Ltd.

European Representative Address: Nexus House, Newbury Business Park

London Road, Newbury

Berkshire RG14 2PZ, England

Conformance to Directive(s)/Product Standards: EC Directive 2004/108/EC

EN55022:2006

EN 55024:1998

A1:2001

A2:2003

EN 61000‐3‐2:2006

EN 61000‐3‐3:1995

A1:2001

A2:2005

EC Directive 2006/95/EC

EN 60950‐1:2006

A11:2009

A1:2010

EN 60825‐1:2007

EN 60825‐2:2004

A1:2007

Equipment Type/Environment: Information Technology Equipment, for use in a Commercial

or Light Industrial Environment.

Enterasys Networks, Inc. declares that the equipment packaged with this notice conforms to the above directives.

Enterasys Networks, Inc. Firmware License Agreement

BEFORE OPENING OR UTILIZING THE ENCLOSED PRODUCT,

CAREFULLY READ THIS LICENSE AGREEMENT.

This document is an agreement (“Agreement”) between the end user (“You”) and Enterasys Networks, Inc., on behalf of itself

and its Affiliates (as hereinafter defined) (“Enterasys”) that sets forth Your rights and obligations with respect to the Enterasys

software program/firmware (including any accompanying documentation, hardware or media) (“Program”) in the package

and prevails over any additional, conflicting or inconsistent terms and conditions appearing on any purchase order or other

document submitted by You. “Affiliate” means any person, partnership, corporation, limited liability company, other form of

enterprise that directly or indirectly through one or more intermediaries, controls, or is controlled by, or is under common

control with the party specified. This Agreement constitutes the entire understanding between the parties, with respect to the

subject matter of this Agreement. The Program may be contained in firmware, chips or other media.

BY INSTALLING OR OTHERWISE USING THE PROGRAM, YOU REPRESENT THAT YOU ARE AUTHORIZED TO ACCEPT

THESE TERMS ON BEHALF OF THE END USER (IF THE END USER IS AN ENTITY ON WHOSE BEHALF YOU ARE

AUTHORIZED TO ACT, “YOU” AND “YOUR” SHALL BE DEEMED TO REFER TO SUCH ENTITY) AND THAT YOU

AGREE THAT YOU ARE BOUND BY THE TERMS OF THIS AGREEMENT, WHICH INCLUDES, AMONG OTHER

PROVISIONS, THE LICENSE, THE DISCLAIMER OF WARRANTY AND THE LIMITATION OF LIABILITY. IF YOU DO NOT

AGREE TO THE TERMS OF THIS AGREEMENT OR ARE NOT AUTHORIZED TO ENTER INTO THIS AGREEMENT,

ENTERASYS IS UNWILLING TO LICENSE THE PROGRAM TO YOU AND YOU AGREE TO RETURN THE UNOPENED

PRODUCT TO ENTERASYS OR YOUR DEALER, IF ANY, WITHIN TEN (10) DAYS FOLLOWING THE DATE OF RECEIPT

FOR A FULL REFUND.

IF YOU HAVE ANY QUESTIONS ABOUT THIS AGREEMENT, CONTACT ENTERASYS NETWORKS, LEGAL

DEPARTMENT AT (978) 684‐1000.

You and Enterasys agree as follows: