CTI 2500C-8-RL-FC 8 Form-C Relay Outputs



2500C-8-RL-FC 8 Form-C Relay Outputs

Features

Single wide module

8 individually isolated channels

Each channel is individually fused

Form C relays

Up to 5A output current per channel

No leakage current

Channel On/Off Status Indication

Blown fuse indication and reporting for each channel

Uses 2500C-32F connector

Module supports hot swapping

Module Logon Selection Jumpers. CP or Classic Plus mode.

CP or Classic Plus mode is the default shipping configuration.

In CP mode the module logs in as a 8X/8Y for blown fuse

reporting. In C or Classic Mode the module logs in as a 8Y

and does not provide blown fuse reporting. This allows cus

tomers to modify the module logon based on their application

requirements. JP2 is available only on 901C Rev boards or

higher

Single wide module

• 8 individually isolated channels

• Each channel is individually fused

• Form C relays

• No leakage current

• Channel On/Off Status Indication

• Blown fuse indication/reporting for each channel

(See Blown Fuse Reporting Note 1)

• 24VCD User Supplied Power Monitored

(See Note 2: 24VDC Power Monitoring)

• Uses CTI’s 2500C-32F Connector

utputs per module 8

Module Logon CP Mode

Default Shipping

Configuration

8X /8Y

Module Logon C Mode 8Y

Output Voltage Range  15-240VAC

15-30VDC

Maximum Output current Resistive: 15VAC -  240VAC: 4A

Resistive: 15VDC -  30VDC: 4A

Pilot Load/Inductive 1.5A @240VAC

Pilot Load/Inductive: 1.5A @30VDC

Switching rate 0.5/ ops/sec (rated load)

Type of output Form C individually fused

Contact Life @full rated current, 4A = 400K cycles

User Power Supply

(required)

24VDC ±10%

70mA(all outputs ON)

User Power Supply Fusing   1 Amp Littlefuse # 37011000410

Output Channel Fusing 8 fuses

Output Fuses:

8 Field Replaceable Fuses

5.0 amp, 250V

Type Littlefuse #215005

Shurter Inc  #0001.2511

Module Size Single wide module

Connector 2500C-32F

Backplane Power  (MAX) 1.22 watts

Input ESD Protection IEC 1000-4-2 Level 4

Isolation  1500 VDC Channel to Backplane

1000 VDC Channel to Channel

Shipping  Dimensions and

Weight

223.84mm x 109.86mm x 34.93mm,

0.234kg

Operating Temperature Range 0ºC to 60ºC (32ºF to 140ºF)

Storage Temperature Range -40ºC to 85ºC (-40ºF to 185ºF)

Relative Humidity 5% to 95% (non-condensing)