CTI 2500C-R8 Eight-Slot Base



2500C-R8 Eight-Slot Base

The 2500C-R8 Base provides slots for a Power Supply and Remote Base Controller (RBC), and 8 I/O slots for Compact IO modules.

The chassis design allows for subpanel mounting.

The backplane provides power to all the modules and communications between the RBC and I/O slots.

In addition it provides a high-speed data exchange bus which supports all the Compact System’s advanced modules and coprocessor modules.

The high-speed data bus includes the RBC and all 8 I/O slots, and is integrated into the connector on each slot.

Features

8 I/O slots

Subpanel mount

Passive backplane design for reliability

High-speed data channel transfer supported

Aluminum construction protects against corrosion and keeps chassis weight at a minimum

Mounting or Installing the 2500C Chassis

1. Mark the location of the base on the mounting panel surface including the mounting holes for the

mounting ears.

2. There are 2 mounting ears. One found on each side of the chassis. Each of the ears provide two

mounting hole locations which must be attached to the mounting panel using a bolt and nut or metal

screws either self tapping or screwed into a drilled and tapped hole.

3. A minimum clearance of 3” should be allowed above and below the chassis to maximize convection

airflow cooling.

4. Drill four holes in sub-panel of NEMA enclosure with a #21 drill bit. Tap the drilled holes with a  #10

32 tap. Install #10 screws through each bracket hole to attach the base to the sub-panel.

5. The 2500C Chassis must be mounted in an appropriate enclosure based on the user environmental

requirements.