SAUTER AKM115SAF332: Smart Actuator for ball valve, BACnet/IP

AKM115SAF332: Smart Actuator for ball valve, BACnet/IP

How energy efficiency is improved

Ball valve actuator with integrated, freely programmable controller and cloud connection in one

device. Can be integrated into a local building automation system via BACnet or into the

SAUTER Cloud via MQTT. Communicates via Ethernet, Wi-Fi and Bluetooth. Automatic adaptation to

the ball valve, precise activation and high energy efficiency with minimal operating noise and smart

functions

Features

• Smart Actuator as an intelligent IoT solution for autonomous control of heating and air-conditioning

applications in smart buildings

• Ready-made HVAC standard applications from SAUTER from the App Store allow efficient

installation and commissioning of small systems

• Applications are selected from the library via mobile app and installed on the Smart Actuator

• Ethernet switch, Wi-Fi interface and Bluetooth LE for flexible device communication and system

integration

• BACnet/IP communication (EN ISO 16484‑5) via Ethernet or Wi-Fi interface

• Convenient commissioning, parameterisation and remote access to the system via a mobile app or

with the SAUTER CASE engineering software

• As an IoT device, the cloud connection for remote access takes place via MQTT using TLS

encryption

• Enables creation of Smart Actuator networks with distributed intelligence

• Optionally, the Smart Actuator can be used flexibly in BA networks due to free programmability via

CASE Suite

• Real-time clock for calendar functions and time programmes

• Two universal I/Os for connecting external sensors and actuators

• Direct connection of up to two room operating units

• Flexibly expandable with up to four I/O modules for comprehensive control tasks

• Pre-assembled cables with mechanically and colour-coded connectors allow fast, error-free wiring

for Smart Actuator and SAIO 100 I/O modules

• Fitting without tools using a bayonet ring made of glass-fibre reinforced plastic

• BLDC motor technology enables extensive diagnostic functions

• Intelligent angle of rotation adaptation and detection including feedback signal

• Electronic, torque-dependent cut-off

• Disengageable gear unit for manual adjustment and local priority operation

• For operating the 2- and 3-way ball valves VKR, VKRA, BKR, BKRA, VKAI, VKAA, BKLI, BKTI and

BKTA, as well as 6-way ball valve B2KL

Ambient conditions

Media temperature2) Max. 100 °C

Ambient temperature-10…55 °C

Ambient humidity 5…85% rh, no condensation

Storage and transport temperature-20…70 °C

Inputs/Outputs

Number of universal I/O 2

Type of inputs Analogue input U 0…10 V (Ri = 100 kΩ, ±0.05 V)

Analogue input I 4...20 mA (with ext. resistor 500 Ω or

accessory 053060311**)

Digital input3) Closed: ≤ 1 VDC, 1 mA

Open: ≥ 4 VDC

Ni1000 −20…100 °C (DIN 43760)

Pt1000 −20…100 °C (IEC 751)

Resistor 200…3000 Ω

Type of output Analogue output U 0…10 V (±0.1 V)

Function

BACnet data point objects Max. 100

BACnet client links 16

Control 6 loops

Active COV Subscription 64

Dynamic objects Time programmes 4 (Schedule)

Calendars 3 (Calendar)

Architecture

Processor ARM Cortex-M7 (528 MHz)

RAM 9 MB

Flash 2 × 16 MB external, for data and sys

tem

Flash encryption 128-bit AES

Application data Via CASE Engine or mobile app

Operating system Zephyr

Cycle time 100 ms

Mobile app For commissioning and maintenance

Cloud Via MQTT to IoT hub

Real-time clock For time programmes and calendars

Interfaces, communication

Ethernet switch connection4) Communication protocol BACnet/IP, HTTPS, NTP, DHCP

Connection 2 × RJ45 connector switch (separa

ble)

RS-485 connection (SLC)5) Communication protocol SLC master (max. 4 slave users)

Use ecoLink I/O module, SAIO 100

ecoUnit 1. ecoUnit 3 operating devi

ces

User6) Max. 2 SAIO 100 modules

Max. 4 ecoLink modules

Max. 2 ecoUnit 1/3

Connection 5-pin connector, coded

Cable length Max. 120 m and max. 30 m between

users

Termination Internal, switchable via software

Bluetooth Version BLE 4.2

Range of transmission < 10 m

Radiation 4 mW

Wi-Fi Standard IEEE 802.11 b/g

Indicator LED indicator 2 status LEDs (green/red and blue)

2) At media temperatures < 5 °C or > 100 °C, appropriate accessory must be used

3) Switching thresholds: 2.28 V (0 to 1) and 2.69 V (1 to 0) or 2.19 kΩ (0 to 1) and 2.69 kΩ (1 to 0)

4) Ethernet interfaces up to 1.5 kV, galvanic isolation

5) Not electrically isolated

6) ecoLink modules: EY-EM510F001. EY-EM514F001. EY-EM522F001. EY-EM527F001