OMRON C200H-CPU23-E COIL 24VDC PLC

OMRON C200H-CPU23-E COIL 24VDC PLC

Offline Operations

Group Description

General

Programming

General programming operations feature function keys to easily read, write, and store programs.

PROGRAMMING SAVE PROGRAM Writes all or part of the user program to a data disk.

RETRIEVE PROGRAM Retrieves all or part of the user program from on a data disk.

CHANGE DISPLAY Switches the display between four display modes: Ladder, Ladder

with Comments, Mnemonic 1 (function key and numeric key input

mode) and Mnemonic 2 (alphanumeric key input mode).

SEARCH INSTRUCTION Searches for instructions including specified operands.

I/O COMMENT Creates, reads, modifies, and searches for I/O comments.

BLOCK COMMENT Creates, edits, and searches for block comments for output instruc

tions.

LINE COMMENT Creates, searches for, and edits line comments.

CUT AND PASTE Edits programs by copying, moving, or deleting instruction blocks.

EDIT I/O COMMENT Displays 32 I/O comments at once to write, edit, and search.

RETRIEVE COMMENTS Retrieves comments from programs stored on a data disk.

MEMORY USAGE Displays the used capacity of user program memory, comments,

and internal memory.

CLEAR MEMORY Clears the user program memory.

CHECK PROGRAM Checks whether the user program contains syntax errors. The check

can be performed in three levels.

DM (data memory) DM operations are used to edit DM data in hexadecimal or ASCII form. There are also features

for copying, filling and printing DM data, as well as data disk save and retrieve operations.

I/O TABLE I/O TABLE is used to edit, check, and print I/O tables. It also provides data disk save and re

trieve operations.

UTILITY DATA AREA LISTS Displays lists of such items as used areas and cross-references

(i.e., instructions that use specified operands).

CHANGE ADDRESSES Globally changes bit and word addresses in the user program.

PRINT LISTS Prints lists, ladder diagrams, and mnemonics.

EPROM FUNCTIONS Writes, reads, and compares the user program between the PROM

Writer and system work disk.

C500 → C2000H Converts the program format from C500 to C2000H

NETWORK DATA LINKS Creates a data link table.

CREATE LIBRARY FILE Formats a floppy disk or hard disk for use with the LSS.

TIME CHART MONITOR Accesses the time chart monitor displays produced online.

SET INSTRUCTIONS Used to assign instructions to function codes in instructions tables

and to save/retrieve instructions tables to/from data disk files.

RETRIEVE/SAVE INSTR Used to save and retrieve expansion instruction sets to and from

data disk files.

PC SETUP Used to set the PC operating parameters in the PC Setup and to

save and retrieve PC Setups to and from data disk files

1-8-2 Online Operations

Group Function name Description

ON-LINE MONITOR DATA Used to monitor up to 20 bits/words during program execution. The status

of bits and contents of words being monitored can also be controlled.

TRANSFER PROGRAM Transfers and compares the user program between the LSS and PC.

ON-LINE EDIT Edits the PC program during MONITOR mode execution.

READ CYCLE TIME Reads and displays the cycle time of the PC.

CLEAR DATA AREAS Clears the PC data areas such as HR, CNT, AR, and DM (to zero).

MEMORY USAGE Displays the used capacity of program memory area, comments, and in

ternal memory.

Operations are also available to change display modes and search for instructions and comments.

DM DM area operations are available to transfer and compare DM data between the PC, LSS, and data

disks, and to monitor DM contents in the PC.

I/O TABLE I/O TABLE operations are used to write, transfer, and compare I/O tables between the PC and LSS.

UTILITY FILE MEMORY Displays file memory lists; transfers file memory contents between PC

and LSS; clears file memory; transfers file memory contents between PC

and File Memory Unit; saves or retrieves file memory contents to or from

floppy disk; and edits file memory data.

XFER DATA LINK TBL Transfers and compares data link tables between the PC and computer.

CLOCK Used to read and set the internal clock in the PC.

TRANSFER INSTR Used to transfer the expansion instruction set from the PC to the LSS.

TRANSFER PC SETUP Used to transfer the PC Setup between the PC and the LSS

1-8-3 Offline and Online Operations

Group Description

SYSTEM SETUP The SYSTEM SETUP provides settings for the operating environment of the LSS, including the

PC that’s being communicated with (including network and interface settings) and disk drive,

comment, printer, PROM Writer, and monitor settings. It also provides settings for transfer of

I/O table and data link tables to UM.

FILE MANAGEMENT FILE MANAGEMENT operations include basic file management features so that files can be

manipulated directly from the LSS. It also provides a feature for merging program files.