UNIOP Operator Interface Display MD02R-04-0042

UNIOP Operator Interface Display MD02R-04-0042

UniOP MD02R-04

Compact HMI devices with 9 function keys, numerical keypad and 20 characters display.

Highlights

Shows up to 4 rows, 20 characters of

information

Monochorme LCD

9 user programmable function keys

with slide-in legends

10 user programmable LED indicators

Multilanguage project capability

Dual-driver communication

Connection to industrial bus systems

and Ethernet with optional modules

IP65 front panel protection

The MD02R-04 HMI panels are compact low cost products yet extremely rich in functionality. The

products support the rich common functionality of the UniOP operator panels:

Powerful and intuitive programming with the UniOP Designer software

Dual-driver communication capability,

Support of more than 130 communication drivers for industrial devices

Optional modules for fieldbus systems (Profibus DP, DeviceNet, CANopen, Interbus) and Ethernet

Display data in numerical, text and bargraph format

Recipe data storage

Keyboard macro editor

Alarms and historical alarm list

Eight level password protection

Technical Data

The product is available in two versions that differ only by display type.

Display Colors Backlight Lifetime

MD02R-04 LCD - LCD 100.000 hours

Display

Rows/columns 4/20

Character height 5 mm

User definable characters 8

Contrast regulation Software

Memory

User memory 512 KB

User memory expansion 512 KB

Front panel

Function keys 9

System keys 10

Touch screen -

User LED’s  9

System LED’s  2

Connections

PC/Printer port Yes

PLC port RS-232. RS-422. RS-485. CL 20 mA

Aux port (fieldbus and Ethernet

connection)

Yes, requires optional module

External keyboard port No

Programming speed 9600 ÷ 38400 bps

Functionality

Number of variables per page Unlimited

Dual-driver capability Yes

Recipe memory 16 KB

Data acquisition and trends No

UniNet network Client/Server

Alarms 1024

Event list 256

Alarm info page Yes

Password Yes

Battery CR2430 (3V 270mA Lithium), non  rechargeable, user

replaceable. Replace with same type or equivalent compatible

with the operating temperature of the product

Hardware RTC Yes

Screen saver No

Buzzer No

Power supply voltage 18 ÷ 30 VDC

The product is compatible with all standard TCM and SCM modules.

To access the slot for the modules, remove the rear cover of the product

The backup battery is accessible for replacement after removing the main module of the unit.

The standard programming cable CA114 can be used with this product.

There are several dedicated LED indicators on the front panel of the unit. Functions are described in the

table below.

A customizable legend strip is included.

Elements not listed in this chapter are reserved for future use.

LED Color Status Meaning

green

OFF No keys are pressed and no errors

BLINK Communication error

ON While any key is pressed (visual feedback)

OFF No hardware problem detected; battery OK

BLINK Battery low

ON Hardware fault

Ordering Information

MD02R-04-0045

R-PRINT2297

Compact low-cost HMI with 4x20 LCD display

Printable legends (5 A4 foils, 8 sets of legends per foil)