Stucke Elektronik SYMAP®ARC Arc protection system

SYMAP®ARC

SYMAP®ARC is a protection system that uses optical sensors and the load current input on the system to detect arcs caused by short circuits, ensuring that arc faults can be quickly cleared within a short interruption period (< 2 milliseconds) of the electrical system.

Arc protection systems for low-voltage and medium-voltage applications

Modular and scalable system, easy to install on DIN rails

Stainless steel enclosure, achieving high electromagnetic compatibility safety

Simple system: triggered only under light conditions

Complex system: arc detection and trip, current rate detection (DI/DT), area and cable compartment selectivity

Protect lives

Reduce injury impact

Improve the usability of containers or plants

Main module

ARC-MS     The Master S module, which provides trip contacts and interconnection, and connects to the optical detection module.

ARC-I     The Master E extension module provides trip contacts, current measurement, and interconnection, and connects to the optical detection module.

Optional HMI and quenching device

Light detection module

ARC-LS3T     Up to 3 L optical S-type sensors and one rapid T-type tear output

Elective Module

ARC-HMI - Human-Machine Interface for extended arc protection system

Arc-Line-Earth-A - IGN launch module, including system cables for use as external quenching equipment

Light sensor

ARC-LLS     Light Line S Sensor

Length: 10/15/20/25 meters

The active sensor component reduces the length by 5 meters

ARC-LPS     Light Point S Sensor

Length: 3/5/10 meters

The middle size is optional

Simple Arc Protection System

Feature:

Stainless steel housing

Installation of DIN rail TS35 is simple

Up to 31 optical detection modules can be connected to the main module via INTERLINK communication

The maximum interconnection length between the main module and the last connected optical detection module is up to 100 meters

15 display states and alarms

3 quick binary outputs, with a ≤ tripping time of 2 milliseconds

1 binary output for alarm indication

1 binary watchdog output (system supervision)

No parameter setting required!

Expand the arc protection system

(Requires parameterization)

Feature:

It includes all the functions of the first level!

And...

Voltage and current measurement

The rate of change of current DI/DT is used as an additional safety trip standard under fault conditions

The SYMAP®ARC parameter tool (SAPT) enables the system to be easily configured and adapted for various applications

Selective cable compartment selection Options

Optional connection ARC-IGN-A can be made to serve as an independent quenching device.

Optional connection of the separate human-machine interface ARC-HMI is available, facilitating user-friendly operation.

Complex Arc Protection System

Feature:

It includes all the functions of Level 2!

And...

Up to 8 extended arc protection systems can be connected via MASTERLINK.

The maximum length of MASTERLINK between two ARC-ME main modules is up to 100 meters.

MASTERLINK topology: line or ring (redundant)

Zone protection