DEIF iE 350 PLC - Programmable Automation PLC Controller



iE 350 PLC

Programmable automation PLC controller with build-in 3-phase measurement

The iE 350 PLC's modular I/O with 3-phase grid measurement ensures maximum design flexibility,

 and the cutting-edge cyber security features make it a safe choice for tomorrow's intelligent energy solutions for both land and marine applications.

About the iE 350 PLC

The iE 350 PLC is a highly flexible, modular PLC and I/O system in terms of reliability, robustness and flexibility.

EtherCAT is used as native communication protocol, both for backplane communication, and interconnection between

multiple Series 300 racks. Other DEIF EtherCAT I/O modules or third party EtherCAT I/O modules can also be connected.

1.1.2 About the hardware modules

The hardware modules are printed circuit boards that slot in to either a R7.1 or R4.1 rack. Depending on the type of module,

they can provide AC or other measurements, inputs, outputs and give communication indication.

The hardware modules feature:

• Placement flexibility in the rack.

• Add, replace, or remove on-site.

All slots must be covered during operation and blind modules can be used to cover unused slots.

1.1.3 Software versions

The information in this document relates to software versions:

Software Details Version

iE PLC bundle Signed Software bundle with components: 2.0.17.x

BSP Board Support Package (Operating System)  5.0.0.x

Software Details Version

CODESYS CODESYS runtime 3.5.18.40 or later

CODESYS IDE PC software for development of CODESYS applications 3.5.22.10 or later

CODESYS TSP iE 350 CODESYS Target Support Package (TSP) 1.3.11.x or later

1.2 Functions and features

1.2.1 General functions and features

Modular and configurable design

Mounting • iE 350 (Base) Base-mounted

• iE 7 display HMI display

New display – easy mount Display has same cut-out footprint as the DEIF DU 300.

Easy expansion Range of Series 300 modules and extension racks.

General functions

CODESYS CODESYS runtime.

View CODESYS license type in WebConfig.

Security

Secure update with signed update packages.

Dual partition for safe update.

Secure boot - only signed software will run.

DEIF libraries DEIF OPC UA library for CODESYS - based on open62541.

Application development CODESYS IDE.

Communication

Plug and play Automatic network configuration (uses static IPv6)

NTP time synchronisation with NTP servers

Communication • Internet Protocol version 6 (IPv6) with SLAAC

• Configurable Internet Protocol version 4 (IPv4)

CAN bus communication

4 CAN ports for:

• CODESYS J1939

• CANopen CODESYS

RS-485 communication 2 serial ports configurable as client or server

Network 4 port switch and 1 Ethernet port, bridged or standalone

WebConfig

WebConfig

A browser-based tool to connect to the controller IP address.

View controller information.

Manage cybersecurity configuration.

If required, restart the controller or do a factory reset