DCS Industrial control system
Product
Article
NameDescriptionContent
English 简体中文
NEW CENTER
Current Location:
Home >> Motorola >> MotorolaHardware Reference V7768/V7769* Intel® Core™ Duo Processor VME Single Board Computer

MotorolaHardware Reference V7768/V7769* Intel® Core™ Duo Processor VME Single Board Computer

From:Motorola | Author:LIAO | Time :2025-08-20 | 715 Browse: | 🔊 Click to read aloud ❚❚ ▶ | Share:

Overview

GE’s V7768/V7769* are single board computers (SBCs) in a dual-slot, passively 

cooled, VME Eurocard form factor. 

The V7768* is a full featured Intel® CoreTM 2 Duo or Celeron® M-based SBC, and 

the V7769* is a full featured Intel Core 2 Duo-based SBC. The V7768/V7769 utilize 

the advanced technology of Intel’s 945GM chipset and the ICH7-M I/O Controller 

Hub. The 945GM chipset runs on a 533 MHz front-side bus with the Celeron M 

processor and a 667 MHz front-side bus with the Core 2 Duo processor. 

The V7768/V7769 are compliant with the VMEbus Specification VITA 1-1994 and 

feature a transparent PCI-to-VME bridge, allowing your board to function as a 

system controller or peripheral CPU in multi-CPU systems.

The V7768 is a single-slot board, and the V7769 is a dual-slot board. The V7769 

has the same functionality as the V7768 and also connects to the ACC-0623* 

(which will be referred to as the mezzanine board throughout this manual), 

making it a dual-slot board. Because the functionality is so similar, this manual 

will refer to both boards (V7768/V7769) throughout unless the material is 

referring to the V7768 or V7769 only

Desktop Features of the V7768/V7769

• Up to 2.0 GByte DDR2 SDRAM (One SODIMM)

• SVGA port (front I/O)

• Dual Gigabit Ethernet (GbE) (front I/O)

• One RS232/422 COM port (front I/O)

• One RS232/422 COM support (rear I/O)

• Two USB 2.0 ports (front I/O)

• Four USB 2.0 support (rear I/O)

• Supports two SATA connections (rear I/O)

• One 2.5-in. SATA hard drive (optional for V7769 only)

• Dual SAS connector (front I/O on V7769 only)

• Real-Time clock/calendar

• Front panel reset switch

• PS/2 Keyboard/Mouse connection (front I/O)

• Onboard parallel connector

The 945GM chipset allows the V7768/V7769 to be capable of executing many of 

today’s desktop operating systems such as Microsoft®’s Windows® XP, Windows 

Vista®, Linux® 2.6.x, and VxWorks® 6.x. The standard desktop features of the 

V7768/V7769 are described in Chapter 2: Standard Features of this manual.

Embedded Features of the V7768/V7769

• Remote booting out the front panel only

• Up to 8 GByte of bootable CompactFlash (optional)

• PCI-X capable PMC site with VITA 35 P2 I/O (factory populated on V7768 

and main board of V7769)

• VITA 1-1994 with byte swap

• 32 KByte NVRAM

• Software-selectable Watchdog Timer with reset

• PMC expansion site Chapter 3: Embedded PC/RTOS Features

The embedded features of the V7768/V7769 are described in Chapter 3 of this 

manual.

The V7768/V7769 are suitable for use in a variety of applications, such as: 

telecommunications, simulation, instrumentation, industrial control, process 

control and monitoring, factory automation, automated test systems, data 

acquisition systems and anywhere that the highest performance processing 

power for VME in a single or dual slot is desired

Intel 945GM Chipset

The V7768/V7769 incorporate the latest Intel chipset technology, the 945GM. The 

Intel 945GM chipset is an optimized integrated graphics solution with up to a 

667 MHz system bus. The chipset has a low power design, advanced power 

management, supporting up to 2 GByte of DDR2 system memory. The 945GM is a 

Memory Controller Hub (MCH) component, providing the processor interface, 

system memory interface (DDR2 SDRAM) and SVGA port.

Key features for the 945GM:

• 533 MHz Processor system bus controller for the Celeron M

• 667 MHz Processor system bus controller for the Intel Core 2 Duo

• Up to 2 GByte DDR2 Memory via SODIMM

• High-speed DMI architecture interface for communication with the ICH7-M 

(I/O controller)

The 945GM supports the Intel ICH7-M I/O controller hub. The ICH7-M supports 

most of the high speed I/O interfaces of the V7768/V7769.

Key features for the ICH7-M:

• USB 2.0

• SATA

• IDE (Primary only)

• PCI

• PCI Express (PCIe)

This manual is composed of the following chapters and appendices:

Chapter 1 - Installation and Setup describes unpacking, inspection, hardware 

jumper settings, connector definitions, installation, system setup and operation of 

the V7768/V7769.

Chapter 2 - Standard Features describes the unit design in terms of the standard 

PC memory and I/O maps, along with the standard interrupt architecture.

Chapter 3 - Embedded PC/RTOS Features describes the unit features that are 

beyond standard functions.

Maintenance provides information relative to the care and maintenance of the 

unit.

Appendix A - Connector Pinouts illustrates and defines the connectors included 

in the unit’s I/O ports.

Appendix B - AMI BIOS Setup Utility describes the menus and options 

associated with the American Megatrends, Inc. (system) BIOS.

Appendix C - Remote Booting describes the menus and selections necessary to 

boot from the SBC remotely.

Intel Celeron M Processor on 65 nm Processor

January 2007, Order Number 312726-004

Intel Core 2 Duo Processor for Intel Centrino® Duo Processor Technology 

Process Datasheet

September 2007, Revision 004, Order Number 314078-004

Mobile Intel 945 Express Chipset Family

November 2006, Order Number 309219-003

  • GE IS200AEPBH1B IS200AEPBH1B‑REV‑AA Pitch-Charger Control PCB Board
  • GE IS200EDEXG1ADA EX2100 SCR Trigger Control Board
  • GE 151X1207CK01SA01 IS200EDEXG1A EX2100 SCR
  • GE 151X1233DD02SA02 IS200AEPBH1B - Variant for pitch control charger assembly
  • GE 151X1233DB01SA01 IS200AEPBH1B - 10kW Wind Power Converter
  • GE 151X1233DB01SA01R | IS200AEPBH1B 10KW Converter
  • GE 151X1233DD01SA02 Pitch Battery Charger (109W6931P001)
  • GE 151X1233DD01SA02 Pitch Battery Charger Assy IS200AEPBH1B
  • GE 151X1233DB02SA02 Rev A IS200AEPBH1B Wind Turbine Converter
  • GE 151X1207CK02SA02 SCR 4400 V 1850 A IS200EDEXG1ADA General Electric EX2100
  • Triconex 3723X 32-Channel TMR Analog Input Module with HART
  • SHINKAWA VM-21G  SIGNAL CONDITIONER SOCKET
  • SHINKAWA VM-21R REVOLUTION SIGNAL CONDITIONER
  • SHINKAWA VM-21T DISPLACEMENT INPUT THRUST SIGNAL CONDITIONER
  • SHINKAWA VM-21D 6-WIRE LVDT SIGNAL CONDITIONER
  • SHINKAWA VM-21P 3-WIRE LVDT SIGNAL CONDITIONER
  • SHINKAWA VM-21A  VIBRATION SIGNAL CONDITIONER
  • SHINKAWA VM-21K DISPLACEMENT INPUT VIBRATION SIGNAL CONDITIONER
  • SHINKAWA VM-25S01 CONDITION MONITORING SYSTEM
  • SHINKAWA VM-25 CONDITION MONITORING SYSTEM
  • SHINKAWA VM-772B DEVICE CONFIG
  • SHINKAWA VM-771B MCL VIEW
  • SHINKAWA VM-76B INSTRUMENT RACK
  • SHINKAWA VM-75B POWER SUPPLY MODULE
  • SHINKAWA VM-742B NETWORK COMMUNICATION MODULE
  • SHINKAWA VM-741B LOCAL COMMUNICATION &  PHASE MARKER MODULE
  • SHINKAWA VM-722B 9-CHANNEL RELAY MODULE
  • SHINKAWA VM-707B AERODERIVATIVE GAS TURBINE  MONITOR MODULE
  • SHINKAWA VM-706B ROD DROP MONITOR MODULE
  • SHINKAWA VM-705B 18-CHANNEL TEMPERATURE   MONITOR MODULE
  • SHINKAWA VM-704B TEMPERATURE MONITOR MODULE
  • SHINKAWA VM-702B ABSOLUTE VIBRATION  MONITOR MODULE
  • SHINKAWA VM-701B VIBRATION / DISPLACEMENT MONITOR MODULE
  • SHINKAWA MODEL VM-5X INTERFACE UNIT
  • SHINKAWA MODEL VM-5W2 DUAL POWER SUPPLY INSTRUMENT RACK
  • SHINKAWA MODEL VM-5H4  INSTRUMENT RACK (for VM-5Z5.6.7)
  • SHINKAWA MODEL VM-5G  SINGLE UNIT   INSTRUMENT RACK
  • SHINKAWA MODEL VM-5Z5,6,7  POWER SUPPLY UNIT
  • SHINKAWA MODEL VM-5Y1,2,3 RELAY MODULE UNIT
  • SHINKAWA MODEL VM-5P3 PHASE MARKER UNIT
  • SHINKAWA MODEL VM-53 DUAL COMMUNICATION UNIT
  • SHINKAWA MODEL VM-52 BOTTOM HOLD MONITOR
  • SHINKAWA MODEL VM-51 ROD DROP MONITOR
  • SHINKAWA MODEL VM-5R TACHOMETER
  • SHINKAWA MODEL VM-5S DUAL TACHOMETER
  • SHINKAWA MODEL VM-5A DUAL VALVE
  • SHINKAWA MODEL VM-5E DUAL CASE
  • SHINKAWA MODEL VM-5L COMPLEMENTARY INPUT
  • SHINKAWA MODEL VM-5N RAMP DIFFERENTIAL
  • SHINKAWA MODEL VM-5D DUAL DIFFERENTIAL
  • SHINKAWA MODEL VM-5T DUAL THRUST MONITOR
  • SHINKAWA MODEL VM-5C ECCENTRICITY MONITOR
  • SHINKAWA MODEL VM-5M DUAL PATH MONITOR
  • SHINKAWA MODEL VM-5B DUAL ACCELERATION MONITOR
  • SHINKAWA MODEL VM-5U DUAL SEISMIC MONITOR
  • SHINKAWA MODEL VM-55 VIBRATION MONITOR
  • SHINKAWA VM-742B1-5 VIBRATION MONITORING SYSTEM CARD
  • Shinkawa PSP-17B P-24-64A P-24-64B Circuit Board Module
  • SHINKAWA MGP-67 PCB
  • Shinkawa JBP-278 P-22-48A-1 P-22-48B-1 Circuit Board Module
  • Shinkawa VM-721B 18-CHANNEL RELAY MODULE
  • Shinkawa FRP-337 P-26-54A P-26-54B Circuit Board Module
  • Shinkawa CPP-111 P-25-59A P-25-59B Circuit Board Module
  • Shinkawa WKN-142K2-2 Vibration Transmitter
  • SHINKAWA VL-202A08L-1012 Rotor Position Monitor Probe Sensor
  • Shinkawa CPP-128 P-26-74A P-26-74B Circuit Board Module
  • Honeywell 51402755-100 PROCESSOR CARD
  • Honeywell 51107595-100 Power
  • HONEYWELL 51304544-100 Control Board
  • HONEYWELL 51109919-100 BOARD
  • HHoneywell 51204160-175 Digital Input Module
  • Honeywell 51304754-150 High Level Analog Input Module
  • HONEYWELL 51304690-100 DIGITAL INPUT CARD
  • Honeywell 51401635-150  COMM CONTROL
  • HONEYWELL 51204174-175 MC-TAOY 52 ANALOG OUTPUT BOARD
  • HONEYWELL  51400596-100
  • HONEYWELL 51401291-100 board card
  • HONEYWELL 51401642-150 I/O LINK MODULE
  • Honeywell LCN‑E Hub Power Supply 38500148‑300
  • Honeywell LCN‑E Hub redundant 38500143‑202 Twisted‑pair LCN
  • Honeywell LCN‑E Hub non‑redundant,38500143‑102
  • Honeywell Enhanced Micro‑TDC‑3000 System Unit MX‑DTAC01K2
  • Honeywell Enhanced Micro‑TDC‑3000 System Unit MX‑DTAB01K2
  • Honeywell Enhanced Micro‑TDC‑3000 System Unit MT11‑520
  • Honeywell STI‑CE Smart Transmitter Interface 51304516‑150
  • Honeywell STI Smart Transmitter Interface 51304516‑100 MC‑PSTX02
  • Honeywell ulse Counter IOP,51304386‑100.MU‑PPIX02
  • Honeywell DO Digital Output IOP‑CE 51304487‑150 CE  version
  • Honeywell DO Digital Output IOP  51304487‑100 MC‑PDOX02
  • Honeywell TDC‑3000 SOE DI IOP,51402625-175 MC‑PDIS12
  • Honeywell TDC‑3000  DI Digital Input IOP‑CE 51304485‑150
  • Honeywell TDC‑3000 DI Digital Input IOP 51304485‑100 MC‑PDIX02
  • Honeywell TDC‑3000 AO Analog Output IOP 51304757‑100 MU‑PAOX02
  • Honeywell TDC‑3000  TC Thermocouple IOP 51304756‑100 MU‑TAMT03
  • Honeywell TDC‑3000   51304755‑100 MU‑TAMR03
  • Honeywell TDC‑3000 LLAI Multiplex AI IOP,51304362‑150
  • Honeywell TDC‑3000  HLAI Analog Input IOP‑CE,51304363‑150
  • Honeywell TDC‑3000  HLAI Analog Input IOP,51304363‑100.4‑20mA
  • Honeywell TDC‑3000  HPM Power Supply,51401731‑100
  • Honeywell TDC‑3000 Standard 1986.HPM High‑Performance PM CPU,51402362‑100
  • Honeywell TDC‑3000 APM Advanced Process Manager CPU,51304459‑100
  • Honeywell TDC‑3000 Standard 1986.PM Process Manager CPU,51304362‑100
  • Honeywell TDC‑3000 NIM Network Interface Module,51304481‑200
  • Honeywell TDC‑3000 NIM Network Interface Module 51304481‑100
  • Honeywell TDC‑3000 BASIC,LCN Terminator Resistor,30732052‑001.Coaxial
  • Honeywell TDC‑3000 BASIC,Hiway Coupler,30753732-001
  • Honeywell TDC‑3000 BASIC,LEPIU Low‑Energy PIU,4DP7APCFA309
  • Honeywell TDC‑3000 BASIC,HLPIU High‑Level PIU,4DP7APCFA106
  • Honeywell TDC‑3000 BASIC,Multifunction Controller(TDC‑2000 DHW),4DP7MFA103
  • Honeywell TDC‑3000 BASIC,Extended Controller(TDC‑2000 DHW),4DP7AXA102
  • Honeywell TDC‑3000 BASIC,Basic Controller(TDC‑2000 DHW),4DP7BBA101
  • Honeywell TDC‑3000 BASIC,XLCNE2 LCN Extender,51305508‑100.Coaxial LCN
  • Honeywell TDC‑3000 BASIC,E‑PLCG PLC Gateway,51400997‑200
  • Honeywell TDC‑3000 BASIC,PLNM Plant Network Module,51401163‑100
  • Honeywell TDC‑3000 BASIC,CG Computer Gateway,80360206‑001
  • Honeywell TDC‑3000 BASIC,HG High‑Speed Gateway,51304526‑100
  • Honeywell TDC‑3000 BASIC,HM History Module,51191596‑200
  • Honeywell TDC‑3000 BASIC,HM History Module,51191596‑100
  • Honeywell TDC‑3000 BASIC,AM Application Module CPU,51401551‑800.K2LCN‑8
  • Honeywell TDC‑3000 BASIC,AM Application Module CPU,51401551‑600.K2LCN‑6
  • Honeywell TDC‑3000 BASIC,AM Application Module CPU,51401551‑400,K2LCN‑4
  • Honeywell TDC‑3000 BASIC,AM Application Module CPU,51401551‑300.K2LCN‑3
  • Honeywell TDC‑3000 BASIC,AM Application Module CPU,51401551‑200,K2LCN‑2
  • Honeywell TDC‑3000 BASIC,US Universal Station CPU,51401288‑200
  • TDC‑3000 BASIC,US Universal Station CPU,51401288‑100
  • SHINKAWA VM-21P1 Signal Conditioner 0-50MM 24VDC
  • Shinkawa RiverNew Vibration Transducer VK202 Series
  • Shinkawa Electric VM-3E2 Vibration Monitor Module