AMAT 0101-57162 electronic control board

Applied Materials (AMAT) 0101-57162 is a specialized electronic control board, primarily identified as an AKT Series Interface or Distribution Board

This component is a vital part of the AKT (Applied Komatsu Technology) line of tools, specifically used in Large Area Substrate processing for the Flat Panel Display (FPD) industry.

It functions as a signal routing and connectivity hub within the tool's electronics rack, ensuring reliable data and power distribution between the central controller and localized chamber hardware.

Technical Parameter Table

Related Models

The 0101-57162 is typically part of a multi-board assembly or control rack alongside:

0101-57161: Complementary Interface/Logic Board.

0101-57127: P-DRV (Power Driver) Board.

0101-57125: AKT COL-C Communication Board.

0100-71047: Mainframe Interlock Board.

Application Cases

This board is essential for the electrical architecture of large-format glass processing tools:

Signal Distribution: Routing complex logic signals from the VME mainframe to specific actuators and sensors across the tool's expansive frame.

Display Manufacturing: Integral to the production of TFT-LCD and OLED screens where multi-chamber synchronization is required.

CVD/PECVD Process Support: Managing the connectivity for gas-flow controllers and vacuum sensors in AKT 5500/6000 systems.

Hardware Interface: Acting as a termination point for various ribbon cables that link the primary processor to the chamber-level electronics.

Product Advantages and Features

High-Density Connectivity: Consolidates multiple communication paths into a single interface, reducing cable clutter and potential failure points.

Noise Immunity: Built with industrial-grade shielding and ground planes to prevent signal interference in high-power RF (Radio Frequency) environments.

German/Japanese Engineering: Manufactured to the high standards required for 24/7 high-volume manufacturing (HVM) in leading semiconductor fabs.

Gold-Plated Contact Points: Enhances signal integrity and prevents connector oxidation in the chemical-rich atmospheres of cleanrooms.

Other Models in the Same Series

0101-57160: Early generation interface module.

0101-57163: Enhanced Power Distribution variant.

0101-58162: Newer revision for Gen 8.5+ display manufacturing lines.

Installation and Maintenance

Installation: Ensure the system is powered down and in "Service Mode." Slide the 0101-57162 into its designated slot or mount it to the interface panel. Ensure all ribbon cables are seated firmly and the locking clips are engaged.

Alignment: Check the connector pins for any signs of bending before insertion. High-density headers like those on the 57162 require precise alignment to avoid short circuits.

Maintenance: Periodically inspect the board for "whiskering" or dust buildup. In large AKT tools, vibrations from robotic handlers can occasionally cause connectors to loosen; verify tightness during semi-annual PMs (Preventative Maintenance).

Handling: ESD Protocol is Mandatory. These boards contain sensitive logic circuitry. Always use a grounded wrist strap and store in an anti-static bag when the board is not installed.

Unique Product Description

The AMAT 0101-57162 is the "connectivity hub" of the AKT 5500/6000 ecosystem.

In the massive architecture of a flat-panel display tool, keeping signals organized and clean is a major engineering challenge.

The 0101-57162 solves this by providing a robust, high-density interface that ensures the "brain" of the tool remains in constant, clear contact with its physical sensors and actuators.

Its reliable performance is a key factor in achieving the uniform film quality required for the world's most advanced display panels.