ALSTOM COP232.2 VME A32/D32, 029.232 446 controller unit

ALSTOM COP232.2 VME A32/D32, 029.232 446 controller unit

Ethernet is a network standard of communication. The most widely used for LAN communication, Ethernet typically runs at 100 megabytes per second. All new controllers developed by ALSTOM Power Service use the Ethernet standard for communication. The following chapter describes what type of equipment is needed to successfully set up a Ethernet network that functions well together with Alstom Power Service products.

029.144.456
029.217.136
029.232.600
029.352.157
029.360.500
029.384.679
029.144.442
029.148.988
029.228.500
029.232.603
029.359.820
029.367.479

For general information on Ethernet there is a lot of information available both on the Internet and in published books. A good place to start is one of the following websites:

For specific information on Industrial Ethernet standards the Industrial Ethernet Planning and Installation Guide is recommended, can be down loaded from the following website:

The Ethernet switch shall meet the following standards: • EMC immunity for industry EN 50082-2 or EN 61000-6-2 Alstom Power Service has successfully used the switches from HMS Industrial Networks, Sweden and different types of switches from Hirschman Electronics.

Ethernet hub should not be used in a new installation, because it will decrease the performance of the network. With a hub in the network it is also more difficult to calculate the allowed cable lengths.