Honeywell 51402755-100 PROCESSOR CARD



Honeywell  51402755-100  PROCESSOR CARD

SELECT button

By pressing the SELECT button, the monitor enters into two “Adjustment” MODEs

by selecting the mode selection switch.

MODE 1

MODE 2

The WIDTH indicator lights up and you can

adjust the WIDTH.

The R indicator lights up and you can adjust

red of Color Temperature No. 3.

Pressing the SELECT button will cause the indicator light to shift right, enabling

the adjustment feature for that indicator to become active.

If you press the SELECT button in MODE 1 when the ROTATION indicator lights

up, the COLOR indicator lights.

indicator lights.

If you press the SELECT button in MODE 2 when the B

indicator was light, the

Press the SELECT Button

COLOR

1 2 3

R G B

SELECT

Indicator light shifts to the right by pressing the SELECT button.

Mode 1

Mode 2

53947

• MODE selection switch

You can select the Adjustment MODE 1 or MODE 2.

When you select MODE 1. you can adjust (select) the following setting:----

Horizontal Width,

Horizontal Centering

Vertical Height

Vertical Centering----

SPC

Rotation (Only available

for HM-4821-D)

Moire

Color Temperature

When you select MODE 2. you can adjust the Color Temperature No. 3.-

Red of Color Temperature No. 3--

Green of Color Temperature No. 3

Blue of Color Temperature No. 3

COLOR Temperature indicator

See DISPLAY SETTING, subsection 5.4.3.3.

• WIDTH indicator

The WIDTH indicator lights up, when you select WIDTH in MODE 1.

5.4.3.3  Display Setting

53939

You can adjust the following settings by using the screen control buttons on the front panel:

(1) Contrast

(2) Brightness

(3) Horizontal Width

(4) Horizontal Centering

(5) Vertical Height

(6) Vertical Centering

(7) SPC (Side Pincushion)

(1)

(8) Rotation (Only available for HM-4821-D)

(9) Moire: HM-4821-D…Option

HM-4820-D…Standard

(10) Color Temperature selection

(11) RGB Color Balance

Contrast

The contrast control adjusts the contrast of the screen image.-

Press the “+” button, the screen increases the contrast between light and dark.-

Press the “–” button, the screen decreases the contrast between light and dark.

When you press “+” button and “–” button at the same time, Contrast value

becomes maximum