WOODWARD 5448-890 SPM-D10 Series One Breaker Synchronizer

SPM-D10 Series

One Breaker Synchronizer

APPLICATIONS

SPM-D10 Series

One Breaker Synchronizer

DESCRIPTION

The SPM-D10 is a microprocessor-based synchronizer

designed for use on three phase AC generators equipped

with Woodward or other compatible speed controls and

automatic voltage regulators. The SPM-D10 synchronizer

provides automatic frequency, phase and voltage matching

using either analog- or discrete output bias signals.

The HJV Package provides additional mains protection.

Part-No. 8440-1668 SPM-D1040B/XN is a direct

replacement of the SPM-A synchronizer.

DESCRIPTION

Synchronizing

• Phase match or slip frequency synchronization with

voltage matching

Protection ANSI #

HJV Packages

• Three-phase sensing of mains voltage

• Mains over-/undervoltage

• Mains over-/underfrequency

• Mains phase/vector shift

Control outputs

Standard

• Discrete raise/lower for speed

• Discrete raise/lower for voltage

X & XN Packages

(59/27)

(81O/U)

(78)

• Analog bias outputs for voltage and speed

freely configurable for all levels (+/-1 V,  +/

3 V, 0 to 5 V, 0.5 to 4.5 V, +/-10 V +/-5 V, 0

to 20 mA, +/-20 mA, and much more

configurable)

• Two-phase sensing of generator and bus

• Selectable operating modes like SPM-A (Run, Check,

Permissive, and OFF)

• Synchro-check possible

• Synchronization time monitoring

Isolated operation

• Frequency control

• Voltage control

Dead bus operation

• Closing of CB on demand

• Speed bias output configurable as 500 Hz

PWM output with  adjustable voltage level

• Two raise/lower outputs configurable for either

speed or voltage

Operating Features

• Two-line Liquid Crystal display for operation

and alarm indication

• Synchroscope

• Indication of control activity and breaker state

• Multi-level password protection for parameters

• Configuration directly or via PC

• English or German language adjustable

FURTHER SPM-D SYNCHRONIZERS

• The SPM-D10/YB Series provides three-phase generator and bus measurement

refer to product specifications 37298 for more information

• The SPM-D11 Series provides load/var sharing

refer to product specifications 37292 for more information

• The SPM-D21 Series provides synchronizing for two circuit breakers and load control

refer to product specifications 37293 for more information

SPECIFICATIONS (for more see specific manuals)

Accuracy..........................................................................................Class 1

Power supply...................................................[Standard] 24 Vdc (+/-25 %)

[N & XN Packages] 90 to 250 Vac/dc

Intrinsic consumption..................................................................max. 10 W

Ambient temperature................................................................-20 to 70 °C

[N & XN Packages] -20 to 60 °C

Ambient humidity......................................................95 %, non-condensing

Voltage....................Rated /Δ: [1] 66/115 Vac or [4] 230/400 Vac

Maximum value (Vmax): [1] 150 Vac or [4] 300 Vac

Rated voltage Vph-ground: [1] 150 Vac or [4] 300 Vac

Rated surge voltage: [1] 2.5 kV or [4] 4.0 kV

Measuring frequency.................................................................40 to 70 Hz

Linear measuring range up to.......................................................1.3×Vrated

Input resistance.................................................[1] 0.21 MΩ, [4] 0.696 MΩ

Max. power consumption per path................................................< 0.15 W

Discrete inputs.............................................................................. isolated

Input range....................................................................max. 250 Vac or dc

Input resistance.....................................................................approx. 68 kΩ

Relay outputs................................................................................ isolated

Contact material...............................................................................AgCdO

Load (GP)......................................................................2.00 Aac@250 Vac

2.00 Adc@24 Vdc / 0.36 Adc@125 Vdc / 0.18 Adc@250 Vdc

Pilot duty (PD)..............................................................................................

1.00 Adc@24 Vdc / 0.22 Adc@125 Vdc / 0.10 Adc@250 Vdc

Housing......................................................Type APRANORM DIN 43 700

Dimensions.......................................................................144×72×122 mm

Front cutout............................................................138[+1.0]×67[+0.7] mm

Connection................................................screw/plug terminals depending

on connector 1.5 mm² or 2.5 mm²

Front.................................................................................insulating surface

Protection system..................................................with correct installation

Front......................................