Abaco BIO-4 Rear transition card for the CPCI-200A IP carrier
Overview
The BIO-4 transition module for 6U CPCI IndustryPack I/O provides access to 200 lines of IndustryPack I/O via the rear-panel CPCI J4 and J5 connectors.
Four 50-pin SCSI-type high-density panel-mounted connectors
Designed for access to IndustryPack I/O on CPCI-200A-BP
Access to 200 lines of rear-panel I/O for 6U CPCI IndustryPack carriers
Specifications
Form Factor
cPCI
BIO-4
Rear transition card for the CPCI-200A IP carrier
FOXBORO FCP280
ABB APC100, 3ASC25H203
GE DS200RTBAG1A RELAY TERMINAL BOARD
HONEYWELL 51305072-100
GE IS215VCMIH2C
OMACO GF0-57CQD-002
TRICONEX EPI3382
FOXBORO P0400TH-F
Safety regulation
The following safety provisions of EN 50110-1 shall be fully complied with when handling product systems (maintenance) :
1 Disconnect completely.
2 Secure to prevent reconnection.
3 Verify that the installation is complete.
4 Ground and short-circuit the device.
Warning: Only qualified maintenance personnel can remove and insert the module. In order to ensure the personal safety of the operator, before each pulling out or inserting, you must
Disconnect the power supply and ensure that there is no voltage on all terminals at the back, and the product is effectively grounded with the ground screw at the back.
User name | Member Level | Quantity | Specification | Purchase Date |
---|