Abaco CPCI-100A-FP 2-slot IndustryPack carrier for 3U CPCI systems
Abaco CPCI-100A-FP 2-slot IndustryPack carrier for 3U CPCI systems
CPCI-100A-FP
2-slot IndustryPack carrier for 3U CPCI systems
Overview
The CPCI-100A-FP 2-slot IndustryPack carrier for 3U CPCI is available with front-panel IP connectors. The carrier provides an 8 MHz IndustryPack clock for each slot. The standard 8 MB memory space is available for each IndustryPack site.
Front panel I/O
8 MHz IndustryPack clock for each slot
Rear I/O
Two IndustryPack slots on a 3U CPCI card
8 MHz IndustryPack clock for each slot
Two IndustryPack slots on a 3U CPCI card
Specifications
Capacity
4 IP
Form Factor
cPCI 3U
HONEYWELL DCS 621-0020RC supply spare parts card module
ABB DI840 16-channel digital input 24V D.C., redundant
GE IC693MDL930LT
FOXBORO P0916AW
ABB DSDI306 57160001-CM
GE DS303A3C01GXA002XH
GE IC693PWR332
Schneider 140ACI04000
ABB AI880A 3BSE039293R1
Safety regulation
The following safety provisions of EN 50110-1 shall be fully complied with when handling product systems (maintenance) :
1 Disconnect completely.
2 Secure to prevent reconnection.
3 Verify that the installation is complete.
4 Ground and short-circuit the device.
Warning: Only qualified maintenance personnel can remove and insert the module. In order to ensure the personal safety of the operator, before each pulling out or inserting, you must
Disconnect the power supply and ensure that there is no voltage on all terminals at the back, and the product is effectively grounded with the ground screw at the back.
User name | Member Level | Quantity | Specification | Purchase Date |
---|