OMRON CQM1-TC102 CQM1-TC101 PLC

OMRON CQM1-TC102  CQM1-TC101  PLC

Feature Benefits Application

Data files supported in CSV

format and as text files

(.TXT)

It is now possible to read hexadecimal data

within I/O memory in CSV format and as text

files by using the FREAD and FWRIT

instructions.

Log production results and other data

in the CPU I/O memory to the

Memory Card in CSV or text format.

This data and can be read and edited

using spreadsheet software within a

PC via a Memory Card Adapter.

Conversely, settings stored in CSV or

text format in the Memory Card by

spreadsheet software can be read into

the CPU module I/O memory.

File manipulation (format,

delete, etc.) using

instructions

The CPU can manipulate its own file memory

using the CMND instruction.

Operations such as format file, delete,

copy, change name, and create

directory can be manipulated on the

Memory Card from the ladder program

during operation.

Program replacement during

operation

It is now possible to read (replace) the entire

user program from the Memory Card to the CPU

during operation.

Switching control operations without

stopping PLC.

Replacing programs without using

Programming Devices.

Data files are available for

automatic transfer when

power is turned ON

Now DM files and EM files for automatic

transfer to the CPU can be read when the system

power is turned ON.

Storing data settings in data memory

when the power is turned ON.

Reading data automatically when the

power is turned ON instead of

requiring a FREAD instruction.

Easy backup All data (user programs, parameters, and I/O

memory) can now be backed up on the Memory

Card by pressing the Memory Card power

supply switch when the simple backup setting

has been made with the DIP switch.

If a malfunction occurs, all data in the

CPU at that time can be recorded

without using a Programming Device.

Faster online editing If part of the program is changed by the

Programming Device when the CPU is in

MONITOR mode, the extension in cycle time

for overwriting has been reduced.

Previously the maximum extension to the cycle

time was 90ms.  It is now 12ms.

Reduced program maintenance time.

Faster NT Links Now supports high-speed NT Links (1:N mode).

Faster communications with Touch Screens than

the previous standard NT Links allowed (1:N

mode).  Achieve high-speed NT Links with:

NT31-V2 and NT631-V2 terminals only.

Monitoring equipment settings using

Touch Screens is now performed at a

faster speed

CVM1 Duplex

CS1 - EV1 CPUs

Description

CS1 CPU, 0.08µs, 10K Program, 32K DM

Part Number

CS1 CPU, 0.08µs, 20K Program, 32K DM

CS1G-CPU42-EV1

CS1G-CPU43-EV1

CS1 CPU, 0.08µs, 30K Program, 64K DM

CS1 CPU, 0.08µs, 60K Program, 128K DM

CS1G-CPU44-EV1

CS1G-CPU45-EV1

CS1 CPU, 0.04µs, 20K Program, 32K DM

CS1 CPU, 0.04µs, 30K Program, 64K DM

CS1H-CPU63-EV1

CS1H-CPU64-EV1

CS1 CPU, 0.04µs, 60K Program, 128K DM

CS1 CPU, 0.04µs, 120K Program, 256K DM

CS1H-CPU65-EV1

CS1H-CPU66-EV1

CS1 CPU, 0.04µs, 250K Program, 448K DM

SYSMAC CS1 Series CS1G/H-CPU-EV1 CPU Units

Programming Manual

CS1H-CPU67-EV1

W340-E3-1

SYSMAC CS1 Series CS1G/H-CPU-EV1 Programmable Controllers

Operation Manual

W339-E3-2