OMRON NSJW-ETN21 ETHERNET HMI

OMRON NSJW-ETN21 ETHERNET HMI

Setup Tool ports are provided as standard feature. Use these ports to connect a computer to the

Digital Temperature Controller. The E58-CIFQ2 USB-Serial Conversion Cable is required to

connect to the port on the top panel. The E58-CIFQ2 USB-Serial Conversion Cable and E58

CIFQ2-E Communications Conversion Cable are required to connect to the port on the front panel.

(You cannot leave either port connected constantly during operation.)

Recommended panel thickness is 1 to 8 mm.

•Group mounting is not possible in the vertical direction. (Maintain the

specified mounting space between Controllers.)

•To mount the Controller so that it is waterproof, insert the waterproof

packing onto the Controller.

•When two or more Controllers are mounted, make sure that the sur

rounding temperature does not exceed the allowable operating tem

perature specified in the specifications.

The Waterproof Packing is provided with the Temperature

Controller.

Order the Waterproof Packing separately if it becomes lost or

damaged.

The degree of protection when the Waterproof Packing is used

is IP66.

Also, keep the Port Cover on the front-panel Setup Tool port

of the E5EC/E5EC-B/E5AC securely closed.

To maintain an IP66 degree of protection, the Waterproof

Packing and the Port Cover for the front-panel Setup Tool port

must be periodically replaced because they may deteriorate,

shrink, or harden depending on the operating environment.

The replacement period will vary with the operating

environment.

Check the required period in the actual application.

Use 3 years or sooner as a guideline.

Order this Port Cover

separately if the Port Cover on

the front-panel Setup Tool port

is lost or damaged. The

Waterproof Packing must be

periodically replaced because

it may deteriorate, shrink, or

harden depending on the

operating environment.

One pair is provided with the

Controller.

Order the Mounting Adapter

separately if it becomes lost

or damaged