ADLINK NuPRO-598 REV A1 INDUSTRIAL CONTROL MOTHERBOARD
ADLINK NuPRO-598 REV A1 INDUSTRIAL CONTROL MOTHERBOARD
Product Introduction / Overview
The ADLINK NuPRO-598 REV A1 is an industrial-grade full-size PICMG 1.0 single board computer (SBC) designed for mission-critical industrial automation, process control, legacy system upgrades, and high-reliability computing.
Built to support Intel processors with a high-bandwidth system bus, the NuPRO-598 combines high processing performance with expansive legacy I/O flexibility.
Featuring an array of onboard serial interfaces, dual Ethernet ports, integrated graphics, and PCI/ISA backplane expansion capability, the NuPRO-598 REV A1 delivers continuous $24/7$ operational stability in demanding industrial environments.
Technical Table
| Parameter | Specification |
| Manufacturer | ADLINK Technology |
| Model / Hardware Revision | NuPRO-598 / Revision A1 |
| Form Factor | PICMG 1.0 Full-Size Single Board Computer (SBC) |
| Processor Support | Intel LGA775 Core 2 Duo / Pentium 4 / Celeron processors |
| Front Side Bus (FSB) | 1066 / 800 / 533 MHz |
| Chipset | Intel Q965 / ICH8 or equivalent industrial chipset family |
| System Memory | Dual-channel DDR2 DIMM slots (up to 4 GB max capacity) |
| Integrated Graphics | Intel Graphics Media Accelerator (GMA) with VGA output |
| Ethernet Controllers | Dual 10/100/1000 Mbps Gigabit Ethernet (RJ-45) |
| Storage Interfaces | 4× SATA II (3 Gb/s), 1× Ultra ATA/100 IDE interface |
| Expansion Bus | PICMG 1.0 (PCI & ISA bus signals via backplane connector) |
| Peripheral Ports | 6× USB 2.0, 2× RS-232 COM, 1× LPT Parallel, PS/2 Keyboard/Mouse |
| Watchdog Timer | Programmable 1–255 sec/min system reset / interrupt trigger |
Environmental Tolerance Conditions
| Parameter | Operational & Environmental Limit |
| Operating Temperature | 0°C to +60°C (32°F to 140°F) |
| Operating Humidity | 10% to 90% RH (non-condensing @ 40°C) |
| Vibration Tolerance | 0.5 Grms, 5–500 Hz, random (operational) |
| Shock Resistance | 10 G peak acceleration, 11 ms duration, half-sine wave |
| EMC / Safety Certification | CE class A, FCC Class A certified |
Operating Instructions
Pre-Installation & ESD Handling
Electrostatic Protection: Always wear a grounded ESD wrist strap before touching the motherboard or memory modules.
Backplane Insertion: Align the NuPRO-598 REV A1 with the guide rails of a PICMG 1.0 compliant passive backplane.
Press firmly until the golden finger connectors seat completely into the PCI/ISA slots.
Power Connection: Verify that the backplane ATX or AT power supply wiring harness provides stable +3.3V, +5V, +12V, and -12V DC power lines.
Initial Configuration & System Boot
BIOS Access: Connect a PS/2 or USB keyboard and VGA display monitor. Power on the system and press the Del or F2 key during POST to enter the Award/AMI BIOS setup utility.
Storage Mode Setting: Set SATA mode to IDE or AHCI depending on whether your operating system is legacy (Windows XP/WES2009) or modern (Windows 7/10/Linux).
Watchdog Timer Configuration: Enable the onboard hardware watchdog timer in BIOS or via system software API to trigger an automatic reboot if the OS crashes.
Fault Diagnosis
Warning: Before performing hardware diagnostics, disconnect primary AC power from the industrial chassis enclosure.
| Symptom / Fault | Possible Root Cause | Diagnostic & Corrective Action |
| System does not boot (No POST, Fans don't spin) | Power supply failure or poor PICMG backplane seating | Check backplane DC power voltages. Unseat and firmly re-seat the SBC in the PICMG slot. |
| Continuous Beeping during POST | Memory initialization failure | Remove DDR2 RAM modules, clean contact pins with isopropyl alcohol, and test one module at a time. |
| System freezes or reboots under heavy load | CPU overheating or thermal paste degradation | Inspect CPU fan operation. Clean heatsink dust and replace thermal compound on the processor socket. |
| Ethernet LEDs remain OFF when cable connected | Driver mismatch or port speed negotiation issue | Verify link LEDs on RJ-45 jack. Check BIOS for disabled onboard LAN controllers; update network drivers in OS. |
| Watchdog Timer triggers constant reboots | Software loop timeout or unhandled exception | Check application log files; ensure watchdog heartbeat pulse is periodically cleared by system control software. |
Related Models of the Same Series
The NuPRO Series by ADLINK includes several PICMG 1.0 and PICMG 1.3 industrial single-board computers configured for different computing eras and slot architectures:
NuPRO-E42: PICMG 1.3 system host board supporting 8th/9th Gen Intel Core processors for modern high-performance control systems.
NuPRO-E315: PICMG 1.3 System Host Board (SHB) with LGA1150 socket supporting 4th Gen Intel Core i7/i5/i3 CPUs.
NuPRO-935A: Full-size PICMG 1.0 SBC supporting Intel Core 2 Duo and Quad processors with dual Gigabit LAN.
NuPRO-852: Legacy PICMG 1.0 board designed for Intel Pentium M / Celeron M processors, ideal for legacy ISA/PCI slot equipment.
NuPRO-730: Industrial PICMG 1.0 board equipped with Socket 370 / Pentium III architectures for classic industrial field retrofits.
Storage Conditions
To preserve electronic component integrity and prevent solder joint oxidation during long-term storage, adhere to the following environment requirements:
| Condition | Recommended Storage Parameter |
| Storage Temperature | -20°C to +80°C (-4°F to 176°F) |
| Storage Humidity | 5% to 95% RH (non-condensing) |
| Packaging Protocol | Store sealed inside moisture-barrier anti-static bags (ESD shielding packaging) with desiccant packs. |
| Shelf-Life Precautions | Maintain atmospheric temperature control; avoid direct exposure to corrosive gases, dust, or moisture condensation. |
| User name | Member Level | Quantity | Specification | Purchase Date |
|---|
-
ADLINK NuPRO-E43 PICMG® 1.3 Full-Size LGA1151 with 6th/7th Generation Intel® Core™ i7/i5/i3 -
ADLINK DLAP-211-JNX/DLAP-211-JT2/ DLAP-211-Nano -
Hirschmann RS30-1602O6O6SDAE compact OpenRail managed Ethernet switches -
Hirschmann RS30-0802O6O6SDAE Ethernet switch
-
Hirschmann RS20-1600T1T1SDAE Management-type Ethernet switch -
Hirschmann OCTOPUS 24M Limited Availability/Passive -
Hirschmann MSP30-24040SCZ9MRHHE3A -
Hirschmann MAR1040-4C4C4C4C9999SMMHRHHXX.X. Gigabit Ethernet Switch configurator -
Hirschmann Industrial Ethernet Rail Switch SPIDER II, SPIDER II Giga, SPIDER II PoE -
Hirschmann Industrial Ethernet Firewall EAGLE One -
Hirschmann Industrial Security Router EAGLE20/30 -
Hirschmann Description and operating instructions RS2-xTX/xFX EEC -
Basler Electric DECS-200 Digital Excitation Control System -
Basler Electric GENERATOR PROTECTION SYSTEM BE1-GPS100 -
Jaquet FT3000 Speed measurement system -
Hirschmann Industrial Ethernet Ruggedized Switch MACH1000 Family -
Basler Electric BESTCOMSPlus® -
ETEL AccurET MODULAR 300 EA-P2M-300-xxxxxA controller -
Basler Electric ES Series Protection Relays -
ABB Multifunction Protection and Switchbay Control Unit REF542plus -
EMERSON AMS 2140 Machinery Health Analyzer -
Hirschmann Industrial Ethernet Rail Switch RS20 Basic Family -
GE Grid Solutions P40U Px40 USB Adaptor -
ABB ontinuous Gas Analyzers AO2000 Series AO2040CU Ex Central Unit in Category 2G -
ABB Advance Optima AO2000 Series Continuous gas analyzers Models AO2020. AO2040 -
Advance Optima Module Uras 14 -
SAACKE control optimization -
SAACKE se@vis efficiency monitor -
SAACKE se@vis pro -
SAACKE se@vis eco -
SAACKE se@vis compact -
HIRSCHMANN Industrial ETHERNET Switch MICE MS20/MS30 -
HIRSCHMANN MICE Media modules -
Kongsberg GL-10 Level Switch -
B&R ACOPOSinverter P74 frequency converter -
Beckhoff CX2020 | Basic CPU module (service phase) -
Beckhoff CX1010 | Basic CPU module (service phase) -
Beckhoff CX5120 | Embedded PC with Intel Atom® E3815 -
Beckhoff CP69xx-xxxx-0010 | Economy built-in Control Panel with DVI/USB Extended interface -
Beckhoff CP29xx-0000 | Multi-touch built-in Control Panel with DVI/USB Extended interface -
SAACKE Monoblock Rotary Cup Burner SKVJ-M -
ABB Plantguard Fault Tolerant Technology Architecture and Software -
OMRON H8PR-8/H8PR-8P H8PR-16/H8PR-16P H8PR-24/H8PR-24P Rotary Positioner -
ABB PFSA107-Z42 DTU Stressometer Digital Transmission Unit -
Nidec Mentor MP -
IBA ibaNet-E -
IBA FO Connection to Reflective Memory -
IBA FO Connection to Siemens Systems -
IBA Interface Cards For Fiber Optic Connections -
IBA Field and Drive Buses -
IBA ibaPADU-S Modular System -
IBA ibaMAQS -
STUCKE SYMAP®ARC -
STUCKE SYMAP®R -
STUCKE SYMAP®Compact -
MOOG G123-825-001 BUFFER AMPLIFIER -
Motorola MVME5100 Series VME Processor Modules -
Motorola MVME162 Embedded Controller -
HIMatrix Safety-Related Controller System Manual for the Modular Systems -
Motorola MVME2400 Series VME Processor Module -
Sieger System 57 -
KONGSBERG MRU product line continuation -
Woodward easYgen-3100/3200 Genset Control for Multiple Unit Operation -
Woodward MFR 300 Multifunction Relay / Measuring -
ABB AX410, AX411, AX413, AX416, AX418, AX450, AX455 and AX456 Single and dual input analyzers for low level conductivity -
ABB AX410, AX411, AX416, AX450 and AX455 Single and dual input analyzers -
Woodward easYgen-1400 Technical Manual Genset Control -
Woodward easYgen-400 Operation Manual Genset Control -
Woodward High Output Digital Valve Positioner (DVP）DVP5000/DVP10000/DVP12000 -
Woodward High Output Digital Valve Positioner DVP5000 and DVP10000 -
Woodward TG611-13/-17 Overspeed Test Device Conversion Kit -
Woodward MicroNet Safety Module (MSM) -
Woodward 2301A Electronic Load Sharing and Speed Control 9905/9907 Series -
Woodward-Service Bulletin 01671 -
UniOP eTOP40B 12.1” TFT color display -
UniOP eTOP40 TFT Color display -
UniOP eTOP33B 10.4” TFT color display -
UniOP eTOP33C eTOP33-0050 Resistive touchscreen -
UniOP eTOP30. eTOP32 eTOP32-0050 Human-machine interface equipment
-
UniOP eTOP20B and eTOP21B eTOP20B-0050 -
UniOP eTOP12 eTOP12-0050 Advanced human-machine interface equipment -
UniOP eTOP11 eTOP11-0050 HMI -
UniOP eTOP06C HMI -
UniOP eTOP06 HMI -
UniOP eTOP05EB eTOP05EB-DF45 HMI -
UniOP eTOP05. eTOP05P Human-machine interface equipment -
UniOP eTOP03 eTOP03-0046 -
UniOP eTOP507 507U2P1 eTOP Series 500 Human-Machine Interface -
UniOP eTOP307 -
UniOP ETT-VGA Human-machine interface touch unit -
UniOP ePAD32B, ePAD33B and ePAD33BT ePAD33B-0350 -
UniOP ePAD05 and ePAD06 -
UniOP CP02R-04 Human-machine interface -
UniOP ERT-16 - Industrial PLC Workstation -
UniOP ePAD03 and ePAD04 -
UNIOP EPALM10-DA71 state-of-the-art handheld HMI -
Watlow SERIES CLS200 SPECIFICATION SHEET -
Detailed Explanation of B&R Power Panel 300/400: The Core of Industrial Automation Control -
YOKOGAWA Models ANB10S, ANB10D, ANR10S, ANR10D Node Units (for FIO) -
Woodward ESDR 4 Current Differential Protection Relay -
Woodward easYgen-3000 Genset Control for -
Woodward CPC-II Current-to-Pressure Converter -
Woodward 8290-189-EPG-installation-manual 8290-044 -
Woodward Product Change Notification 06946A -
Woodward Product Change Notification 06912 -
Fisher™ 4660 High-Low Pressure Pilot -
Flexible digital protection and control equipment SYMAP® -
Woodward 723PLUS Digital Control -
Woodward 505 Digital Controller For steam turbineses -
Woodward 85018V2 505E Digital Governor for Extraction Steam Turbines -
Woodward 85018V1 Turbine Control Parameters
-
Woodward 26871 505 Enhanced Digital Control for Steam Turbines
-
Woodward 03365 505E (Extraction / Admission) -
KONGSBERG RMP420-Remote Multipurpose Input/Output -
KONGSBERG RCU501 Remote Controller Unit -
KONGSBERG RCU500 Remote Controller Unit -
K-Gauge TOP KONGSBERG Tank Overfill Protection SystemFeatures -
Kongsberg DPS112 DGNSS (DGPS/DGLONASS) sensor -
Kongsberg d0000930-presafe-atex-report signed -
HIMax TECHNICAL FACTS X Series -
GE Multilin F650 -
GE MIF II - Legacy -
GE PQM II Power QualIty Meter -
Hydran 201Ti Mark IV Essential DGA monitoring for transformers -
alstom AMS42/84 5B Amplifier SystemAmplifier Technology at its Best. -
GE VMIVME-5576 Fiber-Optic Reflective Memory with Interrupts -
GE Multilin 750/760 - Legacy Feeder Protection System -
GE Fanuc Automation VMICPCI-7806 Specifications
