ADLINK Analog Output PCI-6308 Series

Analog Output

PCI-6308 Series

8-CH 12-Bit Isolated Analog Output Cards

Key Features

Supports a 32-bit 5 V PCI bus

Isolated 8-CH 12-bit voltage output

2500 VRMS optical isolation

Jumper selectable bipolar and unipolar output ranges

4-CH isolated DI and 4-CH isolated DO

Current output version available on PCI-6308A

Ordering Information

PCI-6308V8-CH 12-Bit Isolated Voltage Output Card

Accessory

DIN-37D-01Terminal Board with One 37-pin D-sub Connector and DIN-Rail Mounting (Cables are not included)

ACLD-9137-01General-Purpose Terminal Board with One 37-pin D-sub Male Connector

ACL-10137-1MM37-pin D-sub male/male cable, 1M

ACL-10137-1MF37-pin D-sub male/female cable, 1M

■ DNL: ±1 LSB

■ Output driving capacity: ±5 mA

■ Isolation voltage: 2500 VRMS

■ Output initial status:

0 V (after RESET or POWER-ON)

■ Data transfers: programmed I/O

Current Output (PCI-6308A)

■ Number of channels: 8

■ Resolution: 12 bits

■ Output ranges (software programmable):

0-20 mA, 4-20 mA, and 5-25 mA

■ Gain error: 0.3%

■ Settling time: 17 μs (0-20 mA)

■ Slew rate: 1.3 mA/μs

■ DNL: ±1 LSB maximum

■ Output resistance: 10 GΩ typical

■ Current load resistance: 0 - 500 Ω

■ Output initial status:

4 mA (after RESET or POWER-ON)

■ Data transfer: programmed I/O

Isolated Digital Input

■ Number of channels: 4

■ Maximum input range: 24 V, non-polarity

■ Digital logic levels

• Input high voltage: 5 - 24 V

• Input low voltage: 0 - 1.5 V

■ Input resistance: 2.4 kΩ @ 0.5 W

■ Isolation voltage: 2.500 VRMS

■ Data transfers: programmed I/O

Isolated Digital Output

■ Number of channels: 4 (PCI-6308V & PCI-6308A)

■ Output type: photo-coupler transistors

■ Supply voltage: 5 to 35 V

■ Isolation voltage: 2.500 VRMS

■ Data transfers: programmed I/O

General Specifications

■ I/O connector: 37-pin D-sub female

■ Operating temperature: 0˚C to 55˚C

■ Storage temperature: -20˚C to 80˚C

■ Relative humidity: 5% to 95%, non-condensing

■ Power requirements