Adlink PCI-8154 Advanced 4-axis Servo & Stepper Motion Controller

Adlink PCI-8154 Advanced 4-axis Servo & Stepper Motion Controller

Centralized Motion Controllers

PCIe-8154

Advanced 4-axis Servo & Stepper Motion Controller with Modular Design

Key Features

x1 lane PCI Express interface

16CH TTL digital inputs and 16CH TTL digital outputs

Pulse output rate: up to 6.55 MHz

Pulse output options: OUT/DIR, CW/CCW, AB Phase

2- to 4-axis linear interpolation

2-axis circular interpolation

Helical interpolation

Multi-axis continuous interpolation

The PCIe-8154 delivers high-frequency pulse rates up to 6.55 MHz and hardware-controlled emergency stop, software security protection, card index switching, and simultaneous linear/ circular run,

 exceeding industrial cost/performance requirements.

Compatible with Mitsubishi, Panasonic and Yaskawa servos and any pulse-train controlled servo and stepper drives,

the PCIe-8154 allows complex moving patterns through multiple axes that move with linear and circular interpolations using continuous contouring.

Applicable for a variety of linear and circular trajectories, the PCIe-8154 delivers the smoothest motion control for a wide range of manufacturing applications.

Modularized configuration accommodates ADLINK extension boards for distributed I/O control and high-speed triggering functions.

Ordering Information

PCIe-8158Advanced 8-axis Servo & Stepper Motion Controller with Modular Design

PCIe-8154Advanced 4-axis servo & stepper motion controller

Accessory

DIN-100S-01Terminal board with one 100-pin SCSI-II connector and DIN-rail mounting

DB37FM-IDC44 Fcable L25044-pin flat cable for built-in I/O

DIN-814M -J3A0Terminal board for Mitsubishi MR-J3A/J4A servo amplifiers

DIN-814Y0Terminal board for Yaskawa Sigma V servo amplifier

DIN-814P-A40Terminal board for Panasonic MINAS A4/A5 servo amplifiers with 100-pin SCSI-II connector

Features

● 3 axes helical interpolation

● Hardware-controlled position compare and trigger

(with DB-8150. up to 1 MHz)

● One HSL network support (with DB-8151)

● PCIe bus Plug-and-Play (Universal)

● High density (200-pin) 8-axis motion controller

● Pulse output rate: up to 6.55 MHz

● Pulse output options: OUT/DIR, CW/CCW, AB Phase

● 2 to 4 axes linear interpolation

● 2 axes circular interpolation

● Helical interpolation

● Multi-axis continuous interpolation

● Position/Speed change override

● Hardware emergency input

● Supports up to 12 cards in one system

Introduction

The PCI-8158 delivers high-frequency pulse rates of up to 6.55 MHz

and features hardware-controlled emergency input stop, software

security protection to avoid plagiarism, card index switch, and

linear/circular run at the same time for that exceed the industry"s

cost over performance requirements. Compatible with Mitsubishi,

Panasonic and Yaskawa servos and steppers, the PCI-8158 allows

complex moving patterns through multiple axes that move with

linear and circular interpolations using continuous contouring.

Applicable for various linear-wise and circular-wise trajectories,

the PCI-8158 delivers the smoothest motion control for a wide

range of manufacturing applications. Besides, PCI-8158 design is

modularized. ADLINK provides extension board for distributed I/O

control, high-speed triggering and ECAM control