DCS Industrial control system
Product
Article
NameDescriptionContent
Argument
Current Location:
PRODUCT SHOW
Description
OMRON R88M-H10030-B plc
The Setup Tool port is on the top of the Temperature Controller.
It is used to connect the Temperature Controller to the computer to use the Setup Tool.
The E58-CIFQ2 USB-Serial Conversion Cable is required to make the connection.
Refer to the instructions that are provided with the USB-Serial Conversion Cable for the connection procedure.
Note:Do not leave the USB-Serial Conversion Cable connected when you use the Temperature Controller.
Recommended panel thickness is 1 to 5 mm.
•Group mounting is not possible in the vertical direction. (Maintain
the specified mounting space between Controllers.)
•To mount the Controller so that it is waterproof, insert the water
proof packing onto the Controller.
•When two or more Controllers are mounted, make sure that the
surrounding temperature does not exceed the allowable operating
temperature specified in the specifications.
•Use a control panel thickness of 1 to 3 mm if the Y92A-48N and a
USB-Serial Conversion Cable are used together
The Setup Tool port is on the top of the Temperature Controller.
It is used to connect the Temperature Controller to the computer to use the Setup Tool.
The E58-CIFQ2 USB-Serial Conversion Cable is required to make the connection.
Refer to the instructions that are provided with the USB-Serial Conversion Cable for the connection procedure.
Note:Do not leave the USB-Serial Conversion Cable connected when you use the Temperature Controller.
Recommended panel thickness is 1 to 5 mm.
•Group mounting is not possible in the vertical direction. (Maintain
the specified mounting space between Controllers.)
•When two or more Controllers are mounted, make sure that the
surrounding temperature does not exceed the allowable operating
temperature specified in the specifications.
•Use a control panel thickness of 1 to 3 mm if the Y92A-48N and a
USB-Serial Conversion Cable are used together
| IS200EACFG2A GE Exciter AC Feedback Board |
| IS200EACFG1A GE Exciter AC Feedback Board |
| IS200DSPXH1C GE Digital Signal Processor Controller |
| IS200DSPXH1B GE Digital Signal Processor Board (DSPX) |
| IS200DSPXH1A GE digital signal processor control board |
| DS200VPBLG2A GE VME Backplane Board |
| DS200VPBLG1A GE VME Backplane Board |
| DS200FCGDH1B GE Mark V Gate Distribution and Status Card FCGD |
| DS200DSPCH1A GE Digital Signal Processor Control Board |
| DS200DDTBG2A GE LCI Auxiliary I/O Terminal Board |
| DS200DDTBG1A GE LCI Auxiliary I/O Terminal Board |
| DS200ADMAH1A GE Analog-to-Digital Module |
| IS215UCVEH2A GE dual-sided control designed for the LS2100 Series |
| IS215ACLEH2A GE Application Control Layer Module |
| IS215ACLEH1C GE Application Control Layer Module |
| IS200EXTBG4A GE Input/Output Exciter Terminal Board |
| IS200EXTBG3A GE Input/Output Exciter Terminal Board |
| IS200EXTBG2A GE Input/Output Exciter Terminal Board |
| IS200EXTBG1A GE Exciter Terminal Board |
| IS200EXHSG4A GE static exciter terminal board |
Purchase history
| User name | Member Level | Quantity | Specification | Purchase Date |
|---|
Total 0 Record
Customer Reviews
Satisfaction ：
5 Stars
No evaluation information
-
ADLINK PCI/PCIe-7300A, cPCI-7300 32-CH 80 MB/s High-Speed Digital I/O Cards -
ADLINK cPCI-7248/7249R 48-CH DIO & Timer/Counter Cards -
ADLINK PCI-7230/7233/7234. LPCI/LPCIe/cPCI-7230 32-CH Isolated DIO Cards -
ADLINK cPCI-6965 Series Value 6U CompactPCI® Intel® Core™2 Duo -
ADLINK cPCI-6910 Series 6U CompactPCI® Dual-Core Intel® Xeon® Processor LV / ULV Universal Blade -
ADLINK CPCI-6670 6U CompactPCI Low Power Pentium® III SBC -
ADLINK cPCI-6625/6 Series 6U CompactPCI® PlusIO blade with Intel® Core™ i7/i3 Processor -
ADLINK 3U CompactPCI CPU Modules -
ADLINK CM-435 Extreme Rugged™ PC/104 Single Board Computer -
ADLINK PCI-8254/8258 DSP-based 4/8-axis Advanced Motion Controllers -
ADLINK NuPRO-E43 PICMG® 1.3 Full-Size LGA1151 with 6th/7th Generation Intel® Core™ i7/i5/i3 -
ADLINK DLAP-211-JNX/DLAP-211-JT2/ DLAP-211-Nano -
Hirschmann RS30-1602O6O6SDAE compact OpenRail managed Ethernet switches -
Hirschmann RS30-0802O6O6SDAE Ethernet switch
-
Hirschmann RS20-1600T1T1SDAE Management-type Ethernet switch -
Hirschmann OCTOPUS 24M Limited Availability/Passive -
Hirschmann MSP30-24040SCZ9MRHHE3A -
Hirschmann MAR1040-4C4C4C4C9999SMMHRHHXX.X. Gigabit Ethernet Switch configurator -
Hirschmann Industrial Ethernet Rail Switch SPIDER II, SPIDER II Giga, SPIDER II PoE -
Hirschmann Industrial Ethernet Firewall EAGLE One -
Hirschmann Industrial Security Router EAGLE20/30 -
Hirschmann Description and operating instructions RS2-xTX/xFX EEC -
Basler Electric DECS-200 Digital Excitation Control System -
Basler Electric GENERATOR PROTECTION SYSTEM BE1-GPS100 -
Jaquet FT3000 Speed measurement system -
Hirschmann Industrial Ethernet Ruggedized Switch MACH1000 Family -
Basler Electric BESTCOMSPlus® -
ETEL AccurET MODULAR 300 EA-P2M-300-xxxxxA controller -
Basler Electric ES Series Protection Relays -
ABB Multifunction Protection and Switchbay Control Unit REF542plus -
EMERSON AMS 2140 Machinery Health Analyzer -
Hirschmann Industrial Ethernet Rail Switch RS20 Basic Family -
GE Grid Solutions P40U Px40 USB Adaptor -
ABB ontinuous Gas Analyzers AO2000 Series AO2040CU Ex Central Unit in Category 2G -
ABB Advance Optima AO2000 Series Continuous gas analyzers Models AO2020. AO2040 -
Advance Optima Module Uras 14 -
SAACKE control optimization -
SAACKE se@vis efficiency monitor -
SAACKE se@vis pro -
SAACKE se@vis eco -
SAACKE se@vis compact -
HIRSCHMANN Industrial ETHERNET Switch MICE MS20/MS30 -
HIRSCHMANN MICE Media modules -
Kongsberg GL-10 Level Switch -
B&R ACOPOSinverter P74 frequency converter -
Beckhoff CX2020 | Basic CPU module (service phase) -
Beckhoff CX1010 | Basic CPU module (service phase) -
Beckhoff CX5120 | Embedded PC with Intel Atom® E3815 -
Beckhoff CP69xx-xxxx-0010 | Economy built-in Control Panel with DVI/USB Extended interface -
Beckhoff CP29xx-0000 | Multi-touch built-in Control Panel with DVI/USB Extended interface -
SAACKE Monoblock Rotary Cup Burner SKVJ-M -
ABB Plantguard Fault Tolerant Technology Architecture and Software -
OMRON H8PR-8/H8PR-8P H8PR-16/H8PR-16P H8PR-24/H8PR-24P Rotary Positioner -
ABB PFSA107-Z42 DTU Stressometer Digital Transmission Unit -
Nidec Mentor MP -
IBA ibaNet-E -
IBA FO Connection to Reflective Memory -
IBA FO Connection to Siemens Systems -
IBA Interface Cards For Fiber Optic Connections -
IBA Field and Drive Buses -
IBA ibaPADU-S Modular System -
IBA ibaMAQS -
STUCKE SYMAP®ARC -
STUCKE SYMAP®R -
STUCKE SYMAP®Compact -
MOOG G123-825-001 BUFFER AMPLIFIER -
Motorola MVME5100 Series VME Processor Modules -
Motorola MVME162 Embedded Controller -
HIMatrix Safety-Related Controller System Manual for the Modular Systems -
Motorola MVME2400 Series VME Processor Module -
Sieger System 57 -
KONGSBERG MRU product line continuation -
Woodward easYgen-3100/3200 Genset Control for Multiple Unit Operation -
Woodward MFR 300 Multifunction Relay / Measuring -
ABB AX410, AX411, AX413, AX416, AX418, AX450, AX455 and AX456 Single and dual input analyzers for low level conductivity -
ABB AX410, AX411, AX416, AX450 and AX455 Single and dual input analyzers -
Woodward easYgen-1400 Technical Manual Genset Control -
Woodward easYgen-400 Operation Manual Genset Control -
Woodward High Output Digital Valve Positioner (DVP）DVP5000/DVP10000/DVP12000 -
Woodward High Output Digital Valve Positioner DVP5000 and DVP10000 -
Woodward TG611-13/-17 Overspeed Test Device Conversion Kit -
Woodward MicroNet Safety Module (MSM) -
Woodward 2301A Electronic Load Sharing and Speed Control 9905/9907 Series -
Woodward-Service Bulletin 01671 -
UniOP eTOP40B 12.1” TFT color display -
UniOP eTOP40 TFT Color display -
UniOP eTOP33B 10.4” TFT color display -
UniOP eTOP33C eTOP33-0050 Resistive touchscreen -
UniOP eTOP30. eTOP32 eTOP32-0050 Human-machine interface equipment
-
UniOP eTOP20B and eTOP21B eTOP20B-0050 -
UniOP eTOP12 eTOP12-0050 Advanced human-machine interface equipment -
UniOP eTOP11 eTOP11-0050 HMI -
UniOP eTOP06C HMI -
UniOP eTOP06 HMI -
UniOP eTOP05EB eTOP05EB-DF45 HMI -
UniOP eTOP05. eTOP05P Human-machine interface equipment -
UniOP eTOP03 eTOP03-0046 -
UniOP eTOP507 507U2P1 eTOP Series 500 Human-Machine Interface -
UniOP eTOP307 -
UniOP ETT-VGA Human-machine interface touch unit -
UniOP ePAD32B, ePAD33B and ePAD33BT ePAD33B-0350 -
UniOP ePAD05 and ePAD06 -
UniOP CP02R-04 Human-machine interface -
UniOP ERT-16 - Industrial PLC Workstation -
UniOP ePAD03 and ePAD04 -
UNIOP EPALM10-DA71 state-of-the-art handheld HMI -
Watlow SERIES CLS200 SPECIFICATION SHEET -
Detailed Explanation of B&R Power Panel 300/400: The Core of Industrial Automation Control -
YOKOGAWA Models ANB10S, ANB10D, ANR10S, ANR10D Node Units (for FIO) -
Woodward ESDR 4 Current Differential Protection Relay -
Woodward easYgen-3000 Genset Control for -
Woodward CPC-II Current-to-Pressure Converter -
Woodward 8290-189-EPG-installation-manual 8290-044 -
Woodward Product Change Notification 06946A -
Woodward Product Change Notification 06912 -
Fisher™ 4660 High-Low Pressure Pilot -
Flexible digital protection and control equipment SYMAP® -
Woodward 723PLUS Digital Control -
Woodward 505 Digital Controller For steam turbineses -
Woodward 85018V2 505E Digital Governor for Extraction Steam Turbines -
Woodward 85018V1 Turbine Control Parameters
-
Woodward 26871 505 Enhanced Digital Control for Steam Turbines
-
Woodward 03365 505E (Extraction / Admission) -
KONGSBERG RMP420-Remote Multipurpose Input/Output -
KONGSBERG RCU501 Remote Controller Unit -
KONGSBERG RCU500 Remote Controller Unit -
K-Gauge TOP KONGSBERG Tank Overfill Protection SystemFeatures -
Kongsberg DPS112 DGNSS (DGPS/DGLONASS) sensor
