Hirschmann (Belden) RS30-2402O6T1SDAPHH09.0.13 DIN-rail industrial Ethernet switch

Hirschmann (Belden) RS30-2402O6T1SDAPHH09.0.13 is a 26-port DIN-rail managed industrial Ethernet switch from the OpenRail RS30 family.

Built for high-density plant networks, it combines 24 Fast Ethernet copper ports with 2 Gigabit uplink ports (SFP slot + RJ45 copper). 

Running Professional Layer 2 management software (Software Version 09.0.13), it provides advanced redundancy, network security, and operational diagnostics.

1. Product Introduction / Overview

Manufacturer: Hirschmann / Belden

Product Family: OpenRail RS30 Managed Switch Series

Full Part Number: RS30-2402O6T1SDAPHH09.0.13

Port Count: 26 Ports total (24 × Fast Ethernet + 2 × Gigabit Uplinks)

Software Level: P (Professional Layer 2 Management)

Software Version: HiOS / Software Release 09.0.13

Primary Function: Industrial edge-to-backhaul distribution, providing high-density connection for field devices (PLCs, HMIs, drives) while uplinking via Gigabit to control room backbones.

2. Technical Parameter List

3. Environmental Tolerance Conditions

4. Model Classification & Naming Breakdown

The code RS30-2402O6T1SDAPHH09.0.13 decodes as follows:

RS30 - 24 02 - O6 T1 - S - D - A - P - HH - HH - 09.0.13

│ │ │ │ │ │ │ │ │ │ │ └── Software Revision (v9.0.13)

│ │ │ │ │ │ │ │ │ └────┴──────── Power Supply: 2x 12/24/48V DC

│ │ │ │ │ │ │ │ └───────────────── Software Level: Professional

│ │ │ │ │ │ │ └───────────────────── Approvals: CE, cUL508. Class 1 Div 2

│ │ │ │ │ │ └───────────────────────── Housing: DIN Rail Mount

│ │ │ │ │ └───────────────────────────── Operating Temp: Standard (0°C to +60°C)

│ │ │ │ └───────────────────────────────── Uplink 2 Port: 1x 10/100/1000 Mbit/s RJ45

│ │ │ └──────────────────────────────────── Uplink 1 Port: 1x 1000 Mbit/s SFP Slot

│ │ └───────────────────────────────────────── Uplink Count: 2x Gigabit Ports

│ └──────────────────────────────────────────── Downlink Count: 24x Fast Ethernet Ports

└─────────────────────────────────────────────────── Family: OpenRail Switch Series (Managed)

5. Operating Instructions

Mechanical Installation

Hook the top lip of the DIN rail clip onto the top edge of the 35 mm DIN rail.

Push the bottom of the switch housing against the rail until the retaining spring locks with an audible click.

[Top Clip] ──► ┌──────────┐

│Hirschmann│

│ RS30 │

[DIN Rail] ──► ╞══════════╡

│ Switch │

[Release Latch]──► └────┬─────┘

▼ (Pull down with tool to unmount)

Initial IP Address Configuration

DIP Switch / Auto-Configuration: Out of the box, the device attempts to obtain an IP via DHCP/BootP.

Auto Configuration Adapter (ACA11 / ACA21): Inserting a pre-configured ACA module into the RJ11 serial interface automatically restores saved configurations.

Serial Terminal Setup: Connect a terminal cable to the V.24 interface (RJ11/RS232 connector) at 9600 baud, 8 data bits, 1 stop bit, no parity to manually set the initial IP address via CLI.

6. Fault Diagnosis & Troubleshooting

7. Related Models in the Same Series

The Hirschmann OpenRail RS20/RS30 family offers scalable port combinations:

RS20 Series (Fast Ethernet Only):

RS20-0800T1T1SDAP: 8 Fast Ethernet TX Ports

RS20-1600T1T1SDAP: 16 Fast Ethernet TX Ports

RS20-2400T1T1SDAP: 24 Fast Ethernet TX Ports

RS30 Series (With Gigabit Uplinks):

RS30-0802O6O6SDAP: 8 Fast Ethernet TX + 2 Gigabit SFP Ports

RS30-1602O6O6SDAP: 16 Fast Ethernet TX + 2 Gigabit SFP Ports

RS30-2402T1T1SDAP: 24 Fast Ethernet TX + 2 Gigabit RJ45 Copper Ports

Note: The legacy RS20/RS30 series is succeeded by the modern Hirschmann BOBCAT (BXP/BXS) series for high-bandwidth applications.

8. Storage Conditions

To maintain functional integrity prior to installation, observe the following parameters:

Storage Temperature Range: -40 °C to +85 °C

Permissible Relative Humidity: 10% to 95%, strictly non-condensing

Atmospheric Protection: Store in a dry, dust-free environment in original ESD protective packaging. Keep clear of corrosive gas atmospheres (e.g., high sulfur or chlorine concentration).

9. Web Indexing Guidelines

To optimize this technical page for search engine visibility:

HTML Title & Headings:

Title Tag: HIRSCHMANN RS30-2402O6T1SDAPHH09.0.13 Technical Specs & Manual

H1 Tag: Hirschmann RS30-2402O6T1SDAPHH09.0.13 Managed Rail Switch

Structured Product Markup (JSON-LD):

JSON

{

"@context": "https://schema.org/",

"@type": "Product",

"name": "Hirschmann RS30-2402O6T1SDAPHH09.0.13",

"description": "Industrial OpenRail 26-port Managed Rail Switch with 24x 10/100 TX ports, 1x Gigabit SFP slot, and 1x Gigabit TX port.",

"brand": {

"@type": "Brand",

"name": "Hirschmann"

},

"category": "Industrial Network Switches"

}

Google Search Console Submission:

Include the page URL in your sitemap.xml.

Request crawling via the URL Inspection Tool in Google Search Console.