ABB Sample Gas Cooler SCC-C 23070-0-10232110

Sample Gas Cooler SCC-C 23070-0-10232110 

The SCC-C compressor type gas cooler is used to lower the dew point of humid sample gas to avoid condensation in the analyzers. 

An extremely stable and low gas dew point avoids water vapor cross-sensitivity and volumetric errors.

Overview

Integrated Sample Gas Cooler

Compressor sample gas cooler

Constant outlet dew point

1 or 2 gas paths

Heat exchanger made from glass, PVDF or stainless steel, exchangeable without tools

Corrosion-resistant gas lines

High pressure design up to 1 MPa (10 bar)

Temperature controller and display

Suitable for ambient temperatures up to 50 °C

Compact surface-mounting housing (width 1/2 19 inches, 6 height units)

System solutions in connection with the SCC-F sample gas feed unit

Suitable for use in measuring equipment conforming with 17th BImSchV (German Federal Immission Protection Law)

Explosion-proof versions with ATEX and CSA certifications

Data

General specifications:

Compact surface mounting case with dimensions (WXHXD) 1/2 19", 6 HU (266 mm), 302 mm

Mounting brackets for 19" plug-in units or wall mounting

Sample gas throughput 2 x 125 l/h or 1 x 250 l/h

Dew point constancy +/- 0.3 °C with changing ambient temperature or flow change by 10 l/h

1 or 2 gas paths, with or without condensate pump

Corrosion-proof, hence suitable for all chemical applications

For details see data sheet

Sample gas inlet temperature max. 140 °C

Degree of protection IP20 - EN 60529