GE SEPA36AI0150 Circuit breaker

GE’s V7768/V7769* are single board computers (SBCs) in a dual-slot, passively

cooled, VME Eurocard form factor.

The V7768* is a full featured Intel® CoreTM 2 Duo or Celeron® M-based SBC, and

the V7769* is a full featured Intel Core 2 Duo-based SBC. The V7768/V7769 utilize

the advanced technology of Intel’s 945GM chipset and the ICH7-M I/O Controller

Hub. The 945GM chipset runs on a 533 MHz front-side bus with the Celeron M

processor and a 667 MHz front-side bus with the Core 2 Duo processor.

The V7768/V7769 are compliant with the VMEbus Specification VITA 1-1994 and

feature a transparent PCI-to-VME bridge, allowing your board to function as a

system controller or peripheral CPU in multi-CPU systems.

The V7768 is a single-slot board, and the V7769 is a dual-slot board. The V7769

has the same functionality as the V7768 and also connects to the ACC-0623*

(which will be referred to as the mezzanine board throughout this manual),

making it a dual-slot board. Because the functionality is so similar, this manual

will refer to both boards (V7768/V7769) throughout unless the material is

referring to the V7768 or V7769 only.

Desktop Features of the V7768/V7769

• Up to 2.0 GByte DDR2 SDRAM (One SODIMM)

• SVGA port (front I/O)

• Dual Gigabit Ethernet (GbE) (front I/O)

• One RS232/422 COM port (front I/O)

• One RS232/422 COM support (rear I/O)

• Two USB 2.0 ports (front I/O)

• Four USB 2.0 support (rear I/O)

• Supports two SATA connections (rear I/O)

• One 2.5-in. SATA hard drive (optional for V7769 only)

• Dual SAS connector (front I/O on V7769 only)

• Real-Time clock/calendar

• Front panel reset switch

• PS/2 Keyboard/Mouse connection (front I/O)

• Onboard parallel connector

• Remote booting out the front panel only

• Up to 8 GByte of bootable CompactFlash (optional)

• PCI-X capable PMC site with VITA 35 P2 I/O (factory populated on V7768

and main board of V7769)

• VITA 1-1994 with byte swap

• 32 KByte NVRAM

• Software-selectable Watchdog Timer with reset

• PMC expansion site Chapter 3:  Embedded PC/RTOS Features

The embedded features of the V7768/V7769 are described in Chapter 3 of this

manual.

The V7768/V7769 are suitable for use in a variety of applications, such as:

telecommunications, simulation, instrumentation, industrial control, process

control and monitoring, factory automation, automated test systems, data

acquisition systems and anywhere that the highest performance processing

power for VME in a single or dual slot is desired