Yaskawa SGMAH-02AAA21 servo motor

Yaskawa SGMAH-02AAA21 Product information and technical parameters

Brand: Yaskawa

Name: servo motor

Model: SGMAH-02AAA21

Servo motor type SGMAH (speed: 3000r/min).

Power: 0.2kw.

Power supply voltage: single phase AC200V.

Serial encoder: 13 bit relative value.

Design sequence: A.

Shaft end: straight shaft without key.

Optional parts: no brake oil seal.

Improve mechanical properties.

In order to achieve a higher production efficiency, SGDMAH type to the best control to explore the highest performance of the machine,

Compared with the original models, CPU computing time for its 1/2. through the expansion of the new control algorithm,

Positioning time is shortened to the original product of 1/3. to achieve a good response.

The parameter setting and maintenance time is shortened.

In order to establish a high degree system in a short time, the use of the simplicity of the.

Flexible use of online automatic adjustment function,

Automatic adjustment of servo system with mechanical characteristics.

Then use the main loop / control circuit power separation and alarm tracking memory function, can be simple to carry out maintenance

Servo motor SGMGH type.

Rated speed: 1500r/min.

Power: 7.5Kw.

Power supply voltage: three phase AC200V.

Serial encoder: 17 bit relative value.

Design sequence: high precision machine tool.

Shaft end: straight shaft with screw key.

Optional parts: with oil seal, DC24V brake.

High speed feed series: high speed running when no load Yaskawa SGMAH-02AAA21.

Complete separation of the main circuit and the control circuit,

Alarm can only turn off the main circuit power supply, easy to maintain SGMAH-02AAA21

Parameter setting device.

The parameters can be directly entered by the servo drive body.

Saving wiring.

Using a serial encoder, encoder wiring number than the original product reduced by 1/2.

Multi in one control: the use of the parameters of the switch can not use the torque, position, speed controlServo motor type SGMPH (speed: 3000r/min) Yaskawa SGMAH-02AAA21.

Power: 0.75kw.

Power supply voltage: three phase AC200V.

Serial encoder: 13 bit relative value.

Design sequence: A.

Shaft end: straight shaft with key.

Optional parts: with DC24V brake.

Partial flat series: the need to install the servo motor in a small space.

Flexible user system Yaskawa SGMAH-02AAA21.

For you to build the best system to enrich the product line to support you.

Products with single phase 200V, single phase 100V, three-phase 200V,

And for the absolute value encoder, a variety of motor with brake, belt speed reducer.

And then, because of its compliance with international standards, in the world can be assured that the use of.

Smooth running, there is a very seasonal rate of observation and control,

The speed fluctuation of the motor is greatly reduced, and the speed of the motor can be smoothly operated.Equipped with DeviceNet communication function type servo unit (servo controlled power supply drive type)

Maximum applicable motor capacity: 1.5kw.

Power supply voltage: three phase AC400V.

Interface: instruction selection and installation (linear servo motor).

Matching (hardware): paint.

Matching (software): standard.

Matching (parameter): standard.

Optional modules: DeviceNet module (servo control power supply driver).

Communication specifications for DeviceNet based on open field network.

The combination of the DeviceNet controller and the V can be used to implement motion control in a simple way.

Can make use of the city''s rich DeviceNet support software.

Can use the upper controller to manage the servo information.

Through the network from the host controller to monitor the running status of the servo drive, alarm information.

Using the upper controller to manage the servo information, which can improve the maintenance (shorten the debugging time, improve the efficiency of maintenance operations).

Save wiring, reduce the cost and improve the reliability.

Because the upper controller and the servo unit arre connected through the communication network, the connection is greatly saved SGMAH-02AAA21.

Built in rich positioning function.

Can be from the upper controller (PLC or computer) to carry out a variety of simple positioning action.

Equipped with simple positioning, continuous rotation, and return to the origin of continuous rotary motion positioning, running and other rich positioning function SGMAH-02AAA21.