VME-5504L

D32/A16 RS-485 VMEbus Repeater Lin

Overview

The VME-5504L is designed to use a single master repeater board which may be connected to as many as 16 slave repeater boards using a single pair of cable assemblies with cable taps. This configuration allows VMEbus slave I/O boards residing in one VMEbus chassis to be controlled by a VMEbus master residing in another chassis. The VMEbus chassis in which VMEbus masters reside is referred to as a master chassis, while the VMEbus slave boards reside in a slave chassis (no master in slave chassis).

• Supports up to 16 slave-only chassis per master

• DIN-type I/O connectors

• Double Eurocard form factor

• Link includes one master board, one slave board, and a wide variety of cable length options

• Supports 16-bit addressing

• Supports 8-, 16-, and 32-bit data transfers

• Supports the configuration of large I/O systems

• Supports up to 1,000-ft cables

• Differential line drivers and receivers provide ±7 V common-mode noise rejection

• Multidrop capability reduces cost

• Software transparent link

• Slave chassis is placed in reset if master chassis is powered down or cables are disconnected

Specifications

Addressing:  16

Data Transfer Bits

8, 16, 32

Distance

5 to 1,000 ft

Form Factor

VME

Link Cable

Wire, Flat Cable

Other

VMEbus Repeater Link