Manufacturing for this product has been discontinued. As an alternative, please refer to the P94V and 350 relays.
The MIV II, a member of the M II Family of Relays, is a digital device that provides voltage and frequency protection for a wide range of applications at any voltage level.
The MIV II can be ordered with one of the following options:
Four independent time delay phase under/overvoltage elements complete with two independent fixed time ground overvoltage elements
Four units of frequency protection
Both voltage protection and two elements of frequency protection
Use the MIV II also to protect electrical machines like transformers, generators or motors against restricted earth faults.

Features & Benefits
Configurable logic, curves, I/Os and LEDs
Flash memory for field upgrades
Two settings groups
Password protection for local operation
Automatic display of last fault information
Three models available for voltage, frequency and combined protection
Drawout case for easy maintenance
AC/DC power supply
Access via front panel keypad or communication links
Diagnostic features event recording and analog/digital oscillography
EnerVista software for setting & monitoring
Isolated front RS232 serial port
RS485 rear port
Applications
Voltage and/or frequency protection at any voltage in automatic transfer systems, generators, motors, lines and busbars
Protection & Control
Three-phase over and undervoltage, ground overvoltage
Voltage unbalance, over and underfrequency
Circuit Breaker control (open/close)
Configurable I/O
6 outputs, four configurable, plus trip and alarm;
Monitoring & Metering
24-event record
Analog/digital oscillography 24 cycles at 8 samples per cycle
Frequency and per-phase voltage
Monitoring of the last 5 trips information from the display
User Interface
2x16 character LCD display
6 LED indicators, 4 configurable in function and color
EnerVista software for setting and monitoring
Front RS232 and rear RS485 ports using ModBus® RTU protocol up to 19.200 bps