DCS; Industrial control system
Product
Article
NameDescriptionContent
Argument
Current Location:
PRODUCT SHOW
Description
GE 531X305NTBAEG1 is a PCB that functions as a DR terminal board.
GE 531X305NTBAEG1 is a PCB that functions as a DR terminal board.
About the 531X305NTBAEG1
The 531X305NTBAEG1 is a GE Motors and Industrial Systems board component designed for use within exciter or drive cabinets.
This NTB/3TB terminal board uses its passive-interface circuitry along with the control device’s connection terminals for external signal-level inputs and outputs.
It is used for interfaces such as digital control inputs, relay outputs, low-level analog inputs and outputs, analog tach coarse scaling, and interfacing with the power supply, encoder, and RS-232C and RS-422 serial interfaces.
The 531X305NTBAEG1 board provides the control device with several important features.
It can produce unregulated 24 VDC and 120 VAC and 5 VDC and 15 VDC regulated supplies.
The jumpers on the board’s surface allow users to configure the interface for either 5V or 5V encoders.
The seven relay outputs each feature a contact rating of 120 VAC 1 A.
These relays are either Form C or Form A outputs.
Analog outputs can be scaled using the four potentiometers that are located on the board’s surface.
Please follow installation procedures as outlined by the manufacturer in user guides and product manuals.
Following these procedures will reduce the risk of personal injury, and will also protect the board and the overall system.
Only well-trained personnel should handle or install this board.
| GENERAL ELECTRIC DS3820FEDA1C1F FIELD EXCITER |
| General Electric,DS3800HXRB1D1C,PC Board Refurbished |
| GE Fanuc A02B-0168-B013 Power Mate Servo Drive Model E USED |
| GE General Electric IS200WROBH1A IS200WROBH1AAA Relay Power Sensing Board NEW |
| GENERAL ELECTRIC ALSTOM 20X4384A1L 20X4384 /30A PCB FOR MVD377-4502 |
| IS200TBAIH1C GE Analog Input Terminal Board |
| DS200DCFBG1BLC DS200DCFBG1B GE DC Power Supply |
| GE DIGITAL ENERGY IM 0005 G 1006691 CUSTOMERS INTERFACE BOARD |
| GE General Electric IS200EGPAG1B IS200EGPAG1BEC Exciter Gate Pulse Amplifier |
| 350-E-P5-G5-H-E-S-N-N-1E-D-N by GE Multilin Feeder Protection Relay 350 |
| GE Digital Energy NetPro 3000 UPS with Battery Pack 230V 3000VA 72VDC |
| IC693PWR331C GE Power Supply Module NEW FedEx or DHL |
| GE General Electric 531X301DCCAXM1 F31X301DCCAPG1 Drive Control OPEN BOX |
| GE MULTILIN UR 6RH DIGITAL I/O MODULE |
| Ge ic17375pxm002 rx3i 2 channel serial communications module |
| GE MULTILIN F650 BAY CONTROL / GE F650BFBF1G1HI6 19200N81 / GE BAY CONTROL RELAY |
| PTX5072-TB-A1-CA-H0-PA GE Druck PTX5072 0 to 6 bar g Unik 5000 NIB Free ship |
| General Electric CR9500B101A2A AC Solenoid |
| 350-E-P5-G5-H-E-S-N-N-1E-D-N by GE Multilin Feeder Protection Relay 350 |
| 1pcs GE PLC Module IC693PWR321 Power Supply DHL or FedEX or UPS |
Purchase history
| User name | Member Level | Quantity | Specification | Purchase Date |
|---|
Total 0 Record
Customer Reviews
Satisfaction ：
5 Stars
No evaluation information
-
GE VMIVME-5576 Fiber-Optic Reflective Memory with Interrupts -
GE Multilin 750/760 - Legacy Feeder Protection System -
GE Fanuc Automation VMICPCI-7806 Specifications -
VMIVME-7807 VME-7807RC* Intel® Pentium® M-Based VME SBC -
GE Fanuc Automation VMIVME-7750 Specifications -
FOXBORO Compact FBM240. Redundant with Readback, Discrete -
FOXBORO FBM208/b, Redundant with Readback, 0 to 20 mA I/O Module -
FOXBORO FBM201e Analog Input (0 to 20 mA) Interface Modules -
Foxboro DCS FBM206 Pulse Input Module -
FOXBORO FBM216 HART® Communication Redundant Input Interface Module -
FOXBORO Z-Module Control Processor 270 (ZCP270) -
FOXBORO Fieldbus Communications Module, FCM10Ef -
FOXBORO Fieldbus Communications Module, FCM10E -
Foxboro DCS Compact FBM241/c/d, Redundant, Discrete I/O Modules -
Foxboro FBM223 PROFIBUS-DP™ Communication Interface Module
-
Foxboro DCS FBM204. 0 to 20 mAI/OModule -
Foxboro FBM239, Discrete 16DI/16DO Module
-
Foxboro FBM202 Thermocouple/mV Input Module
-
Foxboro E69F Current-to-Pneumatic Signal Converter -
EMERSON M-series Intrinsically Safe I/O -
MVME6100 Series VMEbus Single-Board Computer -
Configuration for AMS 6500 Protection Monitors -
Ovation™ Controller Model OCR1100 (5X00481G04/5X00226G04) -
ABB UCU-22, UCU-23 andUCU-24control units -
ABB force measurement -
AEROTECH Ndrive MP Hardware Manual -
AEROTECH Ndrive HPe 10/20/30 -
AEROTECH Ndrive CP Hardware Manual -
AEROTECH Ndrive Linear Series Digital Servo Amplifiers – Linear -
AEROTECH Ndrive HP 10/20/30 P/N: EDU170 -
AEROTECH EDU176_Ndrive_HL -
ADVANCEDMOTION CONTROLS Analog Servo Drive 120A10 -
GE JPAX-H -
GE JPAX family -
GE Industry Leading Experience -
GE Ether-1000 Unit -
GE Cyber Secured Service Unit -
GE Lentronics E1MXe Multiplexer -
GE TTMX Teleprotection Terminal -
GE Lentronics T1 Multiplexer -
GE Lentronics JungleMUX SONET Multiplexer -
GE Lentronics E1MX Multiplexer -
GE Lentronics TN1Ue SDH Multiplexer
-
GE Lentronics TN1U SDH Multiplexer -
GE Gridcom DXC Family Access and Transmission Multiplexer -
GE Advanced Network Management Simplifying Optical Networks -
GE Lentronics VistaNET Network Management System (NMS) -
ABB System Controller Connect -
Ethernet Module EI 803F ABB -
Ethernet Modules EI 802F ABB -
ABB Ethernet Modules EI 801F
-
ABB Power Supply SD 802F / SD 812F -
ABB Power Supply SA 801F / SA 811F -
ABB Basic Unit PM 802F /PM 803F -
ABB AC 800F Controller Redundancy -
ABB Freelance800F AC800F Data Sheet -
ABB Compact control system replaces PLCs using AC 700F -
ABB Triguard SC300E MSR04XI -
ABB Control product - Soft starter PST/PSTB (Intelligent Type) -
ABB Automation System ABB Procontic T200 -
ABB PCS6000 medium voltage wind turbine converter -
SYSTEM DRIVES PCS6000 ABB -
ABB PP886 Compact Product Suite hardware selector -
ABB CP450 Installation and Operation Manual -
ABB ompact 800 5.1 Product Catalog -
ABB Panel 800 version 6 -
ABB Panel 800 Version 6- Panel Builder Version 6.0-1 -
ABB Panel 800 Version 6- PP885 -
ABB IndustrialIT Panel 800 - PP846 Version 5.1 -
ABB IndustrialIT Panel 800 - PP836 Version 5.1 -
ABB Control Panels CP405 Control Panels CP408 -
ABB PowerUP for medium voltage drives -
ABB Advant® Master S100 I/O system -
GE MiCOM P40U Connect MiCOM P40 IEDs to PCs with USB ports -
GE Reason RT431 GPS Precision-Time Clock -
GE Reason RT430 GNSS Precision-Time Clocks -
GE Reason H49 PRP/HSR Redbox Switch -
GE Reason S20 Managed Ethernet Switches -
GE Gridcom DIP.net -
Central Control Station at Jaenschwalde mineLausitzer Braunkohle AG, Germany (2000 -
ABB Ability™ System 800xA Advant® Master S400 I/O to S800 I/O Evolution -
Advant™Automation with MOD 300™ Software -
ABB MEASUREMENT & ANALYTICS EasyLine EL3000 / EL3060 -
ABB MEASUREMENT & ANALYTICS PGC5000 Process gas chromatograph -
ABB AC servo motors BSM Series -
ABB New BSD Series A complete range -
ABB Advant Controller 110 -
ABB ASTAT® Crane motion controller Version AST10_054 -
ABB-Crane Control System - ASTAT
-
ABB Open Control System Advant Controller 210 -
ABB Open Control System Advant Controller 250 -
ABB Advant Controller 160 -
ABB DSCA33 High Performance Signal Conditioners -
ABB Advant Controller 70 – Kompakter und leistungsfähiger -
ABB Advant Controller 31 Hardware 90 Series -
ABB Advant Controller 31 Series 40 and 50 -
ABB Procontic CS 31 Intelligent decentralized automation system -
ABB Digital output module ICSO 08 R1, 8 relay outputs 2 A -
ABB Analog Input/Output Module 07 AC 91 -
ABB Basic Units 07 KT 97, 07 KT 96, 07 KT 95 Advant Controller 31 -
DCV 700 thyristor panels ABB DC Drives
-
ABB ACV 700 Frequency Converters -
ACS800-04 and ACS800-04M Drive Modules (45 to 560 kW) ABB -
ABB ACS850-04-387A-5 Low-pressure AC drive mechanical transmission -
ABB ACS850-04 drive modules (160 to 560 kW, 200 to 700 hp) -
ABB ACS800 multi-drive,1.1-5600kw -
ABB 64691929 DSMB-01C; POWER SUPPLY BOARD -
ABB T320 System 800xA for Advant Master Configuration -
ABB A331 Advant Controller 400 Configuration and Operation
-
ABB with Advant Controller 400 series -
ABB Electro-Pneumatic Positioner TZIDC -
ABB MNS iS motor control center System guide -
ABB MNS iS The integrated solution for the WAGP project -
MNS iS Motor Control Center System Release V6.0
-
MNSiS Motor Control Center Interface Manual MLink HW 1TGE120021 -
ABB for electrical systems - CMES MService Condition Monitoring V7.7 -
ABB Ability™ Condition Monitoring for electrical systems – CMES
-
ABB 2600T Series Pressure Transmitters -
ABB InstrumentationIT 2600T Pressure Transmitter family -
ABB MEASUREMENT & ANALYTICS 266DSH Differential pressure transmitters -
Abaco XVR19 Intel® Xeon® Based VME Single Board -
VMIVME-4150 Isolated 12-Channel 12-bit Analog Output Board with
-
Abaco XVB603 Intel® Xeon® Based VME Single Board -
Abaco VR12 VP12 6U VME Single Board
-
Mitsubishi MELSERVO-J2-Super series general-purpose AC servo -
Mitsubishi MELSERVO-J3 servo system -
Mitsubishi MELSERVO-JE servo system -
Mitsubishi MELSERVO-J4 AC servo
