GE 531X305NTBAJG1 NTB/3TB Terminal Board.
531X305NTBAJG1 Technical Specifications
Model Number 531X305NTBAJG1
OEM GE Motors and Industrial Systems
Product Type Terminal Board
Frequently Asked Questions about 531X305NTBAJG1
What is a 531X305NTBAJG1 Terminal Board?
The 531X305NTBAJG1 is a NTB/3TB Terminal Board that was manufactured by General Electric for DC300 and Mark V applications.
The 531X305NTBAJG1 is specifically a "J" revision and will serve as a suitable replacement for any NTBA Terminal Board that uses backwards compatibility.
What is the instruction manual for the 531X305NTBAJG1?
The GE Instruction Manual for the 531X305NTBAJG1 NTB/3TB Terminal Board is GEI-100020B and is available upon request from AX Control.
What does the 531X305NTBAJG1 Interface with?
The 531X305NTBAJG1 NTB/3TB Terminal Board provides the following interfaces:
· Power supply
· Encoder
· RS-232C and RS422
· Relay Outputs
· Analog Tach and Reference coarse scaling
· Low-level analog I/O
· Digital control inputs
About the 531X305NTBAJG1
The General Electric 531X305NTBAJG1 card was developed to function as an NTB/3TB terminal board.
This card was manufactured with the 531X series of replacement drive and exciter boards.
A number of critical device features are provided when this board is installed.
Some of the interfacing capabilities of the card include relay and serial outputs, power supplies, encoders, and analog I/O.
A number of important features are provided to the host drive from the NTB/3TB terminal board.
When installed, the 531X305NTBAJG1 card can produce regulated output supplies rated at 5 VDC and 15 VDC.
Unregulated supplies of 24 VDC and 120 VAC are also produced by the board.
Jumpers on the card also allow for interfacing configuration for 5 V and 15 V encoders.
Within the board are seven relays that are either form C or form A output types.
Each relay features a contact fating of 120 VAC. Four potentiometers are also found on the board.
These allow for low level analog I/O scaling to occur.
| User name | Member Level | Quantity | Specification | Purchase Date |
|---|
-
GE VMIVME-5576 Fiber-Optic Reflective Memory with Interrupts -
GE Multilin 750/760 - Legacy Feeder Protection System -
GE Fanuc Automation VMICPCI-7806 Specifications -
VMIVME-7807 VME-7807RC* Intel® Pentium® M-Based VME SBC -
GE Fanuc Automation VMIVME-7750 Specifications -
FOXBORO Compact FBM240. Redundant with Readback, Discrete -
FOXBORO FBM208/b, Redundant with Readback, 0 to 20 mA I/O Module -
FOXBORO FBM201e Analog Input (0 to 20 mA) Interface Modules -
Foxboro DCS FBM206 Pulse Input Module -
FOXBORO FBM216 HART® Communication Redundant Input Interface Module -
FOXBORO Z-Module Control Processor 270 (ZCP270) -
FOXBORO Fieldbus Communications Module, FCM10Ef -
FOXBORO Fieldbus Communications Module, FCM10E -
Foxboro DCS Compact FBM241/c/d, Redundant, Discrete I/O Modules -
Foxboro FBM223 PROFIBUS-DP™ Communication Interface Module
-
Foxboro DCS FBM204. 0 to 20 mAI/OModule -
Foxboro FBM239, Discrete 16DI/16DO Module
-
Foxboro FBM202 Thermocouple/mV Input Module
-
Foxboro E69F Current-to-Pneumatic Signal Converter -
EMERSON M-series Intrinsically Safe I/O -
MVME6100 Series VMEbus Single-Board Computer -
Configuration for AMS 6500 Protection Monitors -
Ovation™ Controller Model OCR1100 (5X00481G04/5X00226G04) -
ABB UCU-22, UCU-23 andUCU-24control units -
ABB force measurement -
AEROTECH Ndrive MP Hardware Manual -
AEROTECH Ndrive HPe 10/20/30 -
AEROTECH Ndrive CP Hardware Manual -
AEROTECH Ndrive Linear Series Digital Servo Amplifiers – Linear -
AEROTECH Ndrive HP 10/20/30 P/N: EDU170 -
AEROTECH EDU176_Ndrive_HL -
ADVANCEDMOTION CONTROLS Analog Servo Drive 120A10 -
GE JPAX-H -
GE JPAX family -
GE Industry Leading Experience -
GE Ether-1000 Unit -
GE Cyber Secured Service Unit -
GE Lentronics E1MXe Multiplexer -
GE TTMX Teleprotection Terminal -
GE Lentronics T1 Multiplexer -
GE Lentronics JungleMUX SONET Multiplexer -
GE Lentronics E1MX Multiplexer -
GE Lentronics TN1Ue SDH Multiplexer
-
GE Lentronics TN1U SDH Multiplexer -
GE Gridcom DXC Family Access and Transmission Multiplexer -
GE Advanced Network Management Simplifying Optical Networks -
GE Lentronics VistaNET Network Management System (NMS) -
ABB System Controller Connect -
Ethernet Module EI 803F ABB -
Ethernet Modules EI 802F ABB -
ABB Ethernet Modules EI 801F
-
ABB Power Supply SD 802F / SD 812F -
ABB Power Supply SA 801F / SA 811F -
ABB Basic Unit PM 802F /PM 803F -
ABB AC 800F Controller Redundancy -
ABB Freelance800F AC800F Data Sheet -
ABB Compact control system replaces PLCs using AC 700F -
ABB Triguard SC300E MSR04XI -
ABB Control product - Soft starter PST/PSTB (Intelligent Type) -
ABB Automation System ABB Procontic T200 -
ABB PCS6000 medium voltage wind turbine converter -
SYSTEM DRIVES PCS6000 ABB -
ABB PP886 Compact Product Suite hardware selector -
ABB CP450 Installation and Operation Manual -
ABB ompact 800 5.1 Product Catalog -
ABB Panel 800 version 6 -
ABB Panel 800 Version 6- Panel Builder Version 6.0-1 -
ABB Panel 800 Version 6- PP885 -
ABB IndustrialIT Panel 800 - PP846 Version 5.1 -
ABB IndustrialIT Panel 800 - PP836 Version 5.1 -
ABB Control Panels CP405 Control Panels CP408 -
ABB PowerUP for medium voltage drives -
ABB Advant® Master S100 I/O system -
GE MiCOM P40U Connect MiCOM P40 IEDs to PCs with USB ports -
GE Reason RT431 GPS Precision-Time Clock -
GE Reason RT430 GNSS Precision-Time Clocks -
GE Reason H49 PRP/HSR Redbox Switch -
GE Reason S20 Managed Ethernet Switches -
GE Gridcom DIP.net -
Central Control Station at Jaenschwalde mineLausitzer Braunkohle AG, Germany (2000 -
ABB Ability™ System 800xA Advant® Master S400 I/O to S800 I/O Evolution -
Advant™Automation with MOD 300™ Software -
ABB MEASUREMENT & ANALYTICS EasyLine EL3000 / EL3060 -
ABB MEASUREMENT & ANALYTICS PGC5000 Process gas chromatograph -
ABB AC servo motors BSM Series -
ABB New BSD Series A complete range -
ABB Advant Controller 110 -
ABB ASTAT® Crane motion controller Version AST10_054 -
ABB-Crane Control System - ASTAT
-
ABB Open Control System Advant Controller 210 -
ABB Open Control System Advant Controller 250 -
ABB Advant Controller 160 -
ABB DSCA33 High Performance Signal Conditioners -
ABB Advant Controller 70 – Kompakter und leistungsfähiger -
ABB Advant Controller 31 Hardware 90 Series -
ABB Advant Controller 31 Series 40 and 50 -
ABB Procontic CS 31 Intelligent decentralized automation system -
ABB Digital output module ICSO 08 R1, 8 relay outputs 2 A -
ABB Analog Input/Output Module 07 AC 91 -
ABB Basic Units 07 KT 97, 07 KT 96, 07 KT 95 Advant Controller 31 -
DCV 700 thyristor panels ABB DC Drives
-
ABB ACV 700 Frequency Converters -
ACS800-04 and ACS800-04M Drive Modules (45 to 560 kW) ABB -
ABB ACS850-04-387A-5 Low-pressure AC drive mechanical transmission -
ABB ACS850-04 drive modules (160 to 560 kW, 200 to 700 hp) -
ABB ACS800 multi-drive,1.1-5600kw -
ABB 64691929 DSMB-01C; POWER SUPPLY BOARD -
ABB T320 System 800xA for Advant Master Configuration -
ABB A331 Advant Controller 400 Configuration and Operation
-
ABB with Advant Controller 400 series -
ABB Electro-Pneumatic Positioner TZIDC -
ABB MNS iS motor control center System guide -
ABB MNS iS The integrated solution for the WAGP project -
MNS iS Motor Control Center System Release V6.0
-
MNSiS Motor Control Center Interface Manual MLink HW 1TGE120021 -
ABB for electrical systems - CMES MService Condition Monitoring V7.7 -
ABB Ability™ Condition Monitoring for electrical systems – CMES
-
ABB 2600T Series Pressure Transmitters -
ABB InstrumentationIT 2600T Pressure Transmitter family -
ABB MEASUREMENT & ANALYTICS 266DSH Differential pressure transmitters -
Abaco XVR19 Intel® Xeon® Based VME Single Board -
VMIVME-4150 Isolated 12-Channel 12-bit Analog Output Board with
-
Abaco XVB603 Intel® Xeon® Based VME Single Board -
Abaco VR12 VP12 6U VME Single Board
-
Mitsubishi MELSERVO-J2-Super series general-purpose AC servo -
Mitsubishi MELSERVO-J3 servo system -
Mitsubishi MELSERVO-JE servo system -
Mitsubishi MELSERVO-J4 AC servo
